• <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • ASTM E3026-15
    商業建筑中易觀察水分影響材料和增加水分有利條件的標準指南: 水分的視覺評定過程

    Standard Guide for Readily Observable Moisture Affected Materials and Conditions Conducive to Elevated Moisture in Commercial Buildings: Visual Moisture Assessment Process


    標準號
    ASTM E3026-15
    發布
    2015年
    發布單位
    美國材料與試驗協會
    替代標準
    ASTM E3026-23
    當前最新
    ASTM E3026-23e1
     
     
    引用標準
    ASTM D7338 ASTM E1527 ASTM E1528 ASTM E2018 ASTM E631
    適用范圍

    4.1 Use—This guide is intended for use on a voluntary basis by parties who wish to obtain a limited survey of commercial real estate to assess for readily observable moisture-affected materials and physical deficiencies conducive to elevated moisture as part of a commercial real estate transaction or commercial property management. This guide is intended to constitute a baseline inquiry using representative observations for the purposes of conducting due diligence regarding the actual and potential presence of readily observable moisture affected materials and physical deficiencies conducive to elevated moisture in connection with a property. Inquiries that are more and less comprehensive than this guide (including, in some instances, no inquiry) may be appropriate in some circumstances in the opinion of the user (for example, when the presence of moisture affected materials is known to the user). Furthermore, no implication is intended that a person must use this guide in order to be deemed to have conducted appropriate inquiry in a commercially prudent or reasonable manner in a particular transaction. Nevertheless, this guide is intended to reflect a commercially prudent and reasonable inquiry. However, a VMA is not intended to serve as a comprehensive survey for the presence of readily observable moisture affected materials and physical deficiencies conducive to elevated moisture in all or most of the building systems throughout a commercial building.


    ASTM E3026-15相似標準


    推薦

    金相制樣解決方案之鋼中非金屬夾雜物含量測定

    ④終拋若選擇 Al2O3?拋光液,容易在試樣表面吸附大量 Al2O3,難以清洗,對夾雜物評定造成影響。夾雜物脫落、腐蝕點、表面附著外來異物等都會對夾雜物識別判定造成干擾。制備注意事項拋光過程中將金剛石懸浮液(多晶或單晶)與酒精以1:1混合使用,在步驟切換過程,清洗完成后務必及時吹干試樣表面,防止水分長時間停留而導致腐蝕生銹。...

    鋼中非金屬夾雜物含量測定金相制備

    因此,非金屬夾雜物對與斷裂過程有關一系列指標(如塑性、韌性、疲勞性能)均帶來很大影響。因此,夾雜物數量分布被認定是評定鋼材質量一個重要指標,并且被列為優質鋼高級優質鋼出廠常規檢測項目之一。?...

    潤滑油常用檢測指標及測定意義

    通常潤滑油在60℃左右有空氣存在并與水混合攪拌情況下,不僅發生氧化乳化而降低潤滑性能,而且還會生成可溶性油泥,受熱作用則生成不溶性油泥,并劇烈增加流體粘度,造成堵塞潤滑系統、發生機械故障。因此,一定要處理好基礎油精制深度所用添加劑與其抗乳化劑關系,在調合、使用、保管貯運過程亦要避免雜質混入污染,否則若形成了乳化液,則不僅會降低潤滑性能,損壞機件,而且形成油泥。...

    灰分測定方法有哪些

    同時用相同濃度體積乙酸鎂溶液做3次試劑空白試驗 [1]  實驗細節  編輯  樣品炭化  樣品應先用小火在電爐上炭化, 并將坩堝蓋半蓋坩堝, 以便氧氣進入二氧化碳、水汽等逸出, 避免易燃樣品炭化過程碳粒濺出。樣品產生大量濃煙后, 再轉為大火燒至試樣完全炭化, 關火, 溫度下降后, 再移入馬弗爐內。若樣品不經炭化過程, 直接灰化使樣品發生熔融, 造成灰化不徹底。...


    誰引用了ASTM E3026-15 更多引用





    Copyright ?2007-2022 ANTPEDIA, All Rights Reserved
    京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號

  • <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • 床戏视频