ASTM G88-13
氧氣應用系統設計的標準指南

Standard Guide for Designing Systems for Oxygen Service

被代替

標準號

ASTM G88-13

發布

2013年

發布單位

美國材料與試驗協會

替代標準

ASTM G88-13e1

當前最新

ASTM G88-21

 

 

引用標準

ASTM G128 ASTM G175 ASTM G63 ASTM G72 ASTM G74 ASTM G93 ASTM G94

適用范圍

4.1 Purpose of Guide G88—The purpose of this guide is to furnish qualified technical personnel with pertinent information for use in designing oxygen systems or assessing the safety of oxygen systems. It emphasizes factors that cause ignition and enhance propagation throughout a system's service life so that the occurrence of these conditions may be avoided or minimized. It is not intended as a specification for the design of oxygen systems.

4.2 Role of Guide G88—ASTM Committee G04’s abstract standard is Guide G128, and it introduces the overall subject of oxygen compatibility and the body of related work and related resources including standards, research reports and a video³ G04 has developed and adopted for use in coping with oxygen hazards. The interrelationships among the standards are shown in Table 1. Guide G88 deals with oxygen system and hardware design principles, and it is supported by a regulator ignition test (see G175).Other standards cover: (1) the selection of materials (both metals and nonmetals) which are supported by a series of standards for testing materials of interest and for preparing materials for test; (2) the cleaning of oxygen hardware which is supported by a series of standards on cleaning procedures, cleanliness testing methods, and cleaning agent selection and evaluation; (3) the study of fire incidents in oxygen systems; and (4) related terminology.

TABLE 1 Role of Guide G88 with Respect to Other ASTM G04 Standard Guides and Practices and their Supporting Test Methods^A, ^B

G128 Guide to Control of Hazards and Risks in Oxygen-Enriched 8199;8199;8199;8199;Systems

8199;G88 Designing Systems for Oxygen Service

8199;8199;G175 Evaluating the Ignition Sensitivity and Fault Tolerance of 8199;8199;8199;8199;8199;8199;Oxygen Regulators

8199;G63 Evaluating Nonmetallic Materials

8199;8199;D2512 Compatibility of Materials With Liquid Oxygen 8199;8199;8199;8199;8199;8199;8199;(Mechanical Impact)

8199;8199;D2863 Measuring the Minimum Oxygen Concentration to Support 8199;8199;8199;8199;8199;8199;8199;Candle-Like Combustion (Oxygen Index)

8199;8199;D4809 Heat of Combustion of Liquid Hydrocarbon Fuels by 8199;8199;8199;8199;8199;8199;8199;Bomb Calorimeter (Precision Method)

1....... ASTM G88-13相似標準 ASTM G88-90(1997)e1 氧氣設備系統設計的標準指南 ASTM G88-21 氧氣設備系統設計的標準指南 ASTM G88-13e1 氧氣服務設計系統標準指南 YY 1468-2016 用于醫用氣體管道系統的氧氣濃縮器供氣系統 T/CCGA 90001-2021 氧氣和富氧場所的火災危險 誰引用了ASTM G88-13 更多引用 ASTM G128/G128M-15(2023) 富氧系統中危險和風險控制的標準指南 ASTM G63-15(2023) 氧氣設備用非金屬材料的評定標準指南 ASTM G94-22 氧氣設備用金屬評估的標準指南 ASTM G175-13(2021) 用于醫療和緊急應用的氧氣壓力調節器的點火靈敏度和容錯性評估的標準試驗方法 ASTM G74-13(2021) 用氣體流體沖擊法測定非金屬材料和部件點火靈敏度的標準試驗方法 ASTM F1792-97(2021) 用于氣體氧氣服務的閥門的特殊要求的標準規范 ASTM D5885/D5885M-20 通過高壓差示掃描量熱法測定聚烯烴合成材料的氧化誘導時間的標準試驗方法 ASTM G93/G93M-19 富氧環境中使用的材料和設備的清潔度水平和清潔方法的標準指南 ASTM E2349-19 金屬鑄造操作安全要求的標準實踐:砂準備 成型和核心制造;熔化和澆注和清潔和整理 ASTM G124-18 富氧大氣中金屬材料燃燒性能測定的標準試驗方法 Copyright ?2007-2022 ANTPEDIA, All Rights Reserved 京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證：京ICP證110310號

<td id="ccaac"></td>

<li id="ccaac"></li>

<table id="ccaac"><rt id="ccaac"></rt></table>