IEC 60204-1:2005
機械安全.機器的電氣設備.第1部分:一般要求
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60204-1:2005 發布歷史
This part of IEC 60204 applies to the application of electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. NOTE 1 This part of IEC 60204 is an application standard and is not intended to limit or inhibit technological advancement. NOTE 2 In this part of IEC 60204, the term electrical includes electrical, electronic and programmable electronic matters (i.e. electrical equipment means electrical, electronic and programmable electronic equipment). NOTE 3 In the context of this part of IEC 60204, the term person refers to any individual and includes those persons who are assigned and instructed by the user or his agent(s) in the use and care of the machine in question. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). NOTE 4 The requirements for the electrical supply installation in buildings are given in the IEC 60364 series. This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) and not exceeding 1 500 V for direct current (d.c), and with nominal supply frequencies not exceeding 200 Hz. NOTE 5 For higher voltages, see IEC 60204-11. This part of IEC 60204 does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of machine has unique requirements to be accommodated to provide adequate safety. This part specifically includes, but is not limited to, the electrical equipment of machines as defined in 3.35. NOTE 6 Annex C lists examples of machines whose electrical equipment can be covered by this part of IEC 60204. This part of IEC 60204 does not specify additional and special requirements that can apply to the electrical equipment of machines that, for example: - are intended for use in open air (i.e. outside buildings or other protective structures); - use, process, or produce potentially explosive material (for example paint or sawdust); - are intended for use in potentially explosive and/or flammable atmospheres; - have special risks when producing or using certain materials; - are intended for use in mines;- sont des machines, unites ou systemes de couture (couverts par la CEI 60204-31); - sont des appareils de levage (couverts par la CEI 60204-32). Les circuits de puissance, dans lesquels I'energie electrique est utiiisee directement comme outil de travail, sont exclus de cette partie de la CEI 60204.
IEC 60204-1:2005由國際電工委員會 IX-IEC 發布于 2005-10，并于 2009-02-19 實施。
IEC 60204-1:2005 在中國標準分類中歸屬于: K04 基礎標準和通用方法，在國際標準分類中歸屬于: 29.020 電氣工程綜合,31.020 電子元器件綜合。
IEC 60204-1:2005 發布之時，引用了標準
- IEC 60034-1 旋轉電機第1部分:額定值和性能*， 2022-02-14 更新
- IEC 60034-5 旋轉電機.第5部分:旋轉電機整體設計提供的防護等級（IP代碼）.分類*， 2020-04-29 更新
- IEC 60072-1 旋轉電機.尺寸和輸出系列.第1部分:機架編號56至400和法蘭編號55至1080*， 2022-03-30 更新
- IEC 60072-2 旋轉電機的尺寸及功率等級 第2部分:機座號:355～1000、凸緣號:1180～2360
* 在 IEC 60204-1:2005 發布之后有更新，請注意新發布標準的變化。
IEC 60204-1:2005的歷代版本如下：
- 2021年 IEC 60204-1:2016/AMD1:2021 修改件1.機械安全.機械電氣設備.第1部分:一般要求
- 2021年 IEC 60204-1:2021 機械安全.機械電氣設備.第1部分:一般要求
- 2016年 IEC 60204-1:2016 機械安全性.機械的電氣設備.第1部分:一般要求
- 2009年 IEC 60204-1:2009 機械安全性.機械的電氣設備.第1部分:一般要求
- 2008年 IEC 60204-1:2005/AMD1:2008 修改件1.機械安全.機械電氣設備.第1部分:一般要求
- 2005年 IEC 60204-1:2005 機械安全.機器的電氣設備.第1部分:一般要求
- 2000年 IEC 60204-1:2000 Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements (Edition 4.1; Edition 4 Consolidated with Amendment 1: 1999)
- 1999年 IEC 60204-1/AMD1:1999 機械的安全 機械的電氣設備 第1部分:一般要求 修改1
- 1998年 IEC 60204-1/COR1:1998 機械的安全.機械的電氣設備.第1部分:一般要求
- 1997年 IEC 60204-1:1997 機械的安全 機械的電氣設備 第1部分:一般要求
- 1992年 IEC 60204-1:1992 工業機械電氣設備.第1部分:一般要求
- 1981年 IEC 60204-1:1981 Equipement electrique des machines industrielles Premiere partie: Regles generales (Edition 2.0)
- 1967年 IEC 60204-1/AMD1:1967 Electrical equipment of machine-tools Part 1: Electrical equipment of machines for general use (Edition 1.0)
- 1965年 IEC 60204-1:1965 Equipement electrique des machine-outils Premiere partie: Equipement electrique des machines d'usage general (Edition 1.0)
- 標準號
- IEC 60204-1:2005
- 發布
- 2005年
- 發布單位
- 國際電工委員會
- 替代標準
- IEC 60204-1:2005/AMD1:2008
- 當前最新
- IEC 60204-1:2016/AMD1:2021
- 引用標準
- IEC 60034-1 IEC 60034-11 IEC 60034-5 IEC 60072-1 IEC 60072-2
- 被代替標準
- IEC 44/494/FDIS:2005 IEC 60204-1:1997 IEC 60204-1 Corrigendum 1:1998 IEC 60204-1 AMD 1:1999 IEC 60204-1 Edition 4.1:2000
- 適用范圍
- This part of IEC 60204 applies to the application of electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. NOTE 1 This part of IEC 60204 is an application standard and is not intended to limit or inhibit technological advancement. NOTE 2 In this part of IEC 60204, the term electrical includes electrical, electronic and programmable electronic matters (i.e. electrical equipment means electrical, electronic and programmable electronic equipment). NOTE 3 In the context of this part of IEC 60204, the term person refers to any individual and includes those persons who are assigned and instructed by the user or his agent(s) in the use and care of the machine in question. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). NOTE 4 The requirements for the electrical supply installation in buildings are given in the IEC 60364 series. This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) and not exceeding 1 500 V for direct current (d.c), and with nominal supply frequencies not exceeding 200 Hz. NOTE 5 For higher voltages, see IEC 60204-11. This part of IEC 60204 does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of machine has unique requirements to be accommodated to provide adequate safety. This part specifically includes, but is not limited to, the electrical equipment of machines as defined in 3.35. NOTE 6 Annex C lists examples of machines whose electrical equipment can be covered by this part of IEC 60204. This part of IEC 60204 does not specify additional and special requirements that can apply to the electrical equipment of machines that, for example: - are intended for use in open air (i.e. outside buildings or other protective structures); - use, process, or produce potentially explosive material (for example paint or sawdust); - are intended for use in potentially explosive and/or flammable atmospheres; - have special risks when producing or using certain materials; - are intended for use in mines;- sont des machines, unites ou systemes de couture (couverts par la CEI 60204-31); - sont des appareils de levage (couverts par la CEI 60204-32). Les circuits de puissance, dans lesquels I'energie electrique est utiiisee directement comme outil de travail, sont exclus de cette partie de la CEI 60204.