ISO 28278-2-2010
建筑玻璃.建筑密封玻璃窗的玻璃產品.第2部分:裝配規則
Glass in building - Glass products for structural sealant glazing - Part 2: Assembly rules
ISO 28278-2-2010 發布歷史
This part of ISO 28278 gives guidelines for the assembly and bonding of glass elements in a frame, window, door or curtain-walling construction, or directly into the building by means of structural bonding of the glass element into or onto the framework or directly into the building. It gives the assembler information that enable him to organize his work and comply with requirements regarding quality control. Quality control of the assembly process is of the highest importance. This part of ISO 28278 provides the minimum requirements for acceptable quality control of the process of structural sealant glazing (SSG) on a single project. The annexes contained at the end of this part of ISO 28278 provide the methods to ensure proper application and documentation for a safe and weatherproof glazing assembly product. This process is intended to be applicable to most SSG projects. The project testing on metal substrates and glass products will determine proper surface preparation and installation instructions. These rules do not apply to the adhesion or durability of the paint finishes or glass products. This is not intended to be a durability test requirement for the paint and glass products commonly used in the SSG process. The structural, weatherproofing and sealant products which are commonly used in structural glazing applications are those based on organosiloxane, “silicone” polymers. This part of ISO 28278 does not preclude the use of other sealant types, where these can demonstrate suitability for service according to this part of ISO 28278 and when they are used following the recommendations of the sealant manufacturer. Supports to be taken into consideration shall be only metallic substrates, uncoated glass, coated glass and ceramic frit enamelled glass. This part of ISO 28278 relates to SSG systems for use in fa?ades and roofs, or parts of them, with glazing with slopes as shown in Figure 1. Fa?ades with an inclination of less than 15° from the vertical are considered vertical fa?ades. If the slope to the outer side has an inclination above 50°, the glass is considered unsupported glass.
ISO 28278-2-2010由國際標準化組織 IX-ISO 發布于 2010-12-15，并于 2010-12-15 實施。
ISO 28278-2-2010 在中國標準分類中歸屬于: Q33 建筑玻璃，在國際標準分類中歸屬于: 81.040.20 建筑玻璃。
ISO 28278-2-2010 發布之時，引用了標準
- ISO 4892-2 日光過濾器的分類*， 2021-08-03 更新
- ISO 8339 房屋建筑.密封件.拉伸性能的測定(延展至斷裂)
- ISO 11600 建筑結構.連接產品.密封劑的分類和要求.修改件1*， 2011-07-14 更新
- ISO 28278-1 建筑玻璃.玻璃裝配結構密封用玻璃產品.第1部分:有支撐和無支撐的整塊與多層玻璃裝配*， 2011-12-01 更新
- ASTM C794 彈性體接縫密封劑的粘附力的標準測試方法
- EN 28339 建筑結構.接合產品.密封料抗拉性能的測定(ISO 8339-1984)
* 在 ISO 28278-2-2010 發布之后有更新，請注意新發布標準的變化。
ISO 28278-2-2010的歷代版本如下：
- 2010年12月15日 ISO 28278-2-2010 建筑玻璃.建筑密封玻璃窗的玻璃產品.第2部分:裝配規則
- 標準號
- ISO 28278-2-2010
- 發布日期
- 2010年12月15日
- 實施日期
- 2010年12月15日
- 廢止日期
- 無
- 中國標準分類號
- Q33
- 國際標準分類號
- 81.040.20
- 發布單位
- IX-ISO
- 引用標準
- ISO 4892-2 ISO 8339 ISO 11600 ISO 28278-1 ASTM C794 EN 28339
- 被代替標準
- ISO/FDIS 28278-2-2010
- 適用范圍
- This part of ISO 28278 gives guidelines for the assembly and bonding of glass elements in a frame, window, door or curtain-walling construction, or directly into the building by means of structural bonding of the glass element into or onto the framework or directly into the building. It gives the assembler information that enable him to organize his work and comply with requirements regarding quality control. Quality control of the assembly process is of the highest importance. This part of ISO 28278 provides the minimum requirements for acceptable quality control of the process of structural sealant glazing (SSG) on a single project. The annexes contained at the end of this part of ISO 28278 provide the methods to ensure proper application and documentation for a safe and weatherproof glazing assembly product. This process is intended to be applicable to most SSG projects. The project testing on metal substrates and glass products will determine proper surface preparation and installation instructions. These rules do not apply to the adhesion or durability of the paint finishes or glass products. This is not intended to be a durability test requirement for the paint and glass products commonly used in the SSG process. The structural, weatherproofing and sealant products which are commonly used in structural glazing applications are those based on organosiloxane, “silicone” polymers. This part of ISO 28278 does not preclude the use of other sealant types, where these can demonstrate suitability for service according to this part of ISO 28278 and when they are used following the recommendations of the sealant manufacturer. Supports to be taken into consideration shall be only metallic substrates, uncoated glass, coated glass and ceramic frit enamelled glass. This part of ISO 28278 relates to SSG systems for use in fa?ades and roofs, or parts of them, with glazing with slopes as shown in Figure 1. Fa?ades with an inclination of less than 15° from the vertical are considered vertical fa?ades. If the slope to the outer side has an inclination above 50°, the glass is considered unsupported glass.