BS 5760-18-2010
系統、設備與部件的可靠性.可靠性要求演示指南.機箱的可靠性

Reliability of systems, equipment and components - Guide to the demonstration of dependability requirements - The dependability case

BS 5760-18-2010 發布歷史

This part of BS 5760 provides a description of the principles of the dependability case and provides guidance on its content and application in systems engineering. The dependability case can be used throughout the life cycle, from concept and definition, through design and development; manufacture and installation, to operations and maintenance; mid?life enhancement, and eventual disposal. Whilst this part of BS 5760 is primarily intended for application by the system developers, it will be of value to bodies who might be contracted to manage the dependability case for a project, where deemed necessary. This part of BS 5760 has five main clauses which describe: a) principles of the dependability case (Clause 5); b) development of the dependability case (Clause 6); c) providing the evidence (Clause 7); d) presenting the evidence (Clause 8); e) assessing the adequacy of the evidence (Clause 9). The activities required for the achievement of dependability depend on the nature and development state of the system and are likely to vary significantly from one project to another. The guidelines are not to be considered as being prescriptive in nature: they are generic and do not attempt to be exhaustive. Annex A describes the general requirements for the dependability case and dependability case report Annex B provides examples of dependability management risks at different stages of a system’s life cycle. Annex C provides a checklist of points for assessing the adequacy of evidence. The checklist is not to be considered to be prescriptive or exhaustive; it is generic and provides guidance to supplement the generic guidance provided in Clause 8. Annex D describes the dependability risk reduction process shown in Figure 7 using illustrative examples where appropriate. Annex E describes the dependability evidence framework, expanding on the information given in 5.1. Whilst this part of BS 5760 does not specifically address safety cases, the same principles can be applied.

BS 5760-18-2010由英國標準學會 GB-BSI 發布于 2010-05-31，并于 2010-05-31 實施。

BS 5760-18-2010 在中國標準分類中歸屬于: L05 可靠性和可維護性，在國際標準分類中歸屬于: 03.120.01 質量綜合,21.020 機器、裝置、設備的特性和設計,29.020 電氣工程綜合。

BS 5760-18-2010的歷代版本如下：

• 2010年05月31日 BS 5760-18-2010 系統、設備與部件的可靠性.可靠性要求演示指南.機箱的可靠性

BS 5760-18-2010 系統、設備與部件的可靠性.可靠性要求演示指南.機箱的可靠性 于 2015-05-31 變更為 BS EN 62741-2015 可靠性要求的論證. 可靠情形。

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 BS 5760-18-2010 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

BS 5760-18-2010

發布日期

2010年05月31日

實施日期

2010年05月31日

廢止日期

無

中國標準分類號

L05

國際標準分類號

03.120.01;21.020;29.020

發布單位

GB-BSI

代替標準

BS EN 62741-2015

適用范圍

This part of BS 5760 provides a description of the principles of the dependability case and provides guidance on its content and application in systems engineering. The dependability case can be used throughout the life cycle, from concept and definition, through design and development; manufacture and installation, to operations and maintenance; mid?life enhancement, and eventual disposal. Whilst this part of BS 5760 is primarily intended for application by the system developers, it will be of value to bodies who might be contracted to manage the dependability case for a project, where deemed necessary. This part of BS 5760 has five main clauses which describe: a) principles of the dependability case (Clause 5); b) development of the dependability case (Clause 6); c) providing the evidence (Clause 7); d) presenting the evidence (Clause 8); e) assessing the adequacy of the evidence (Clause 9). The activities required for the achievement of dependability depend on the nature and development state of the system and are likely to vary significantly from one project to another. The guidelines are not to be considered as being prescriptive in nature: they are generic and do not attempt to be exhaustive. Annex A describes the general requirements for the dependability case and dependability case report Annex B provides examples of dependability management risks at different stages of a system’s life cycle. Annex C provides a checklist of points for assessing the adequacy of evidence. The checklist is not to be considered to be prescriptive or exhaustive; it is generic and provides guidance to supplement the generic guidance provided in Clause 8. Annex D describes the dependability risk reduction process shown in Figure 7 using illustrative examples where appropriate. Annex E describes the dependability evidence framework, expanding on the information given in 5.1. Whilst this part of BS 5760 does not specifically address safety cases, the same principles can be applied.

BS 5760-18-2010系列標準

BS 5760-18-2010 中可能用到的儀器設備