ASTM D6117-23
塑料木材和型材機械緊固件的標準試驗方法
Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
- 標準號
- ASTM D6117-23
- 發布
- 2023年
- 發布單位
- 美國材料與試驗協會
- 當前最新
- ASTM D6117-23
- 引用標準
- ASTM D1761 ASTM D6111 ASTM D6341 ASTM D883 ASTM E4
- 適用范圍
- 1.1 These test methods cover the evaluation of fastener use with “as manufactured” plastic lumber and shapes through the use of two different testing procedures. 1.2 The test methods appear in the following order: Sections Test Method A—Nail, Staple, or Screw Withdrawal Test 4 to 13 Test Method B—Nail, Staple, or Screw Lateral Resistance Test 14 to 22 1.3 Plastic lumber and plastic shapes are currently made predominately from recycled plastics. However, these test methods would also be applicable to similar manufactured plastic products made from virgin resins where the product is non-homogeneous in the cross-section. 1.4 The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D6117-23相似標準
推薦
高分子材料測試需要測試什么項目
翎鈞檢測提供金屬材料包括金屬板材、棒材、線材、型材、鑄件、鍛件、緊固件、鋼絲繩等，非金屬材料包括塑料、橡膠、木材、石材、涂料、膠黏劑、紡織品等材料的力學性能檢驗。...
巴氏硬度計的用途
測試鋁型材、板材、管材、棒材及鋁合金鑄件、鍛件、機械加工零件，測試超厚鋁合金材料及組裝后的鋁合金制品（例如鋁合金門窗、幕墻、消防梯等）。相關標準：ASTM B648《巴柯爾硬度計測量鋁合金硬度的試驗方法》。 巴氏硬度計的另一主要應用是用于測試玻璃鋼（玻璃纖維增強塑料）和硬塑料。大部分玻璃鋼制品的產品標準中都要求測試巴氏硬度。...
拉力機定義及用途
三、拉力機的用途拉力機適用于塑料板材、管材、汽車配件、緊固件、異型材，塑料薄膜及橡膠、電線電纜、防水卷材、金屬絲等材料的各種物理機械性能測試，其使用行業范圍遍布：科研院所、商檢仲載機構、大專院校以入橡膠、輪胎、塑料、電線電纜、制鞋、皮革、紡織、包裝、建材、石化、航空等各個行業，為材料開發、物性試驗、教學研究、質量控制、進料檢驗、生產線的隨機檢驗等不可缺少的檢測設備，拉力機夾具作為儀器的重要組成部分，...
電子拉力測試機的廣泛應用闡述
電子拉力測試機用途廣泛，基本上沒個行業都有用到，只是測試標準不一樣而已，機器是一樣的，下面介紹下拉力測試機的廣泛用途。電子拉力測試機的廣泛應用闡述：電子拉力測試機廣泛應用于各種金屬、非金屬、復合材料、醫藥、食品、木材、銅材、鋁材、塑料型材、電線電纜、紙張、薄膜、橡膠、紡織、航空航天等行業進行拉伸性能指標的測試，同時可根據用戶提供的國內、國際標準定做各種試驗數據處理軟件和試驗輔具。...