EN 50377-18-1:2019
光纖通信系統中使用的連接器組和互連組件 產品規格 第 18-1 部分：4+4x10.3125 Gb/s MPO（QFSP）收發器與配備 12 個光纖 PPS 套圈的 MPO 連接器配合，在 E 端接

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on E

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 EN 50377-18-1:2019 前三頁，或者稍后再訪問。

您也可以嘗試購買此標準，
點擊右側 “購買” 按鈕開始采購（由第三方提供）。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

EN 50377-18-1:2019

發布

2019年

發布單位

CENELEC - European Committee for Electrotechnical Standardization

當前最新

EN 50377-18-1:2019

 

 

適用范圍

Product definition This European Standard contains the initial@ start of life dimensional@ optical@ mechanical and environmental performance requirements (excluding electrical requirements) to be met by a 12 fibre multimode PPS MPO plug terminated on EN 60793-2-10 category A1a.3a or A1a.3b fibre and a 4+4x10@3125 Gb/s MPO (QSFP) transceiver to meet in order to be categorized as an EN standard product. Since different variants are permitted@ product marking details are given in 4.6. Intermateability All products conforming to the requirements of this standard are meant to intermate and give the specified performance level. The intention is that this will be true irrespective of the manufacturing source(s) of the product. Operating environment The tests selected@ combined with the severity and duration@ are representative of a backplane/back panel indoor application typically in a data centre environment derived from a customer premises protected environment as defined in the EN 50173 series and the ISO/IEC 11801 series and specified as category C in EN 61753-1. Reliability Whilst the anticipated service life expectancy of the product in this environment is 10 years@ compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognized reliability assessment programme. Quality assurance Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognized quality assurance programme.

EN 50377-18-1:2019相似標準

推薦