EN 50377-18-1-2019

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on E

EN 50377-18-1-2019 發布歷史

Product definition This European Standard contains the initial@ start of life dimensional@ optical@ mechanical and environmental performance requirements (excluding electrical requirements) to be met by a 12 fibre multimode PPS MPO plug terminated on EN 60793-2-10 category A1a.3a or A1a.3b fibre and a 4+4x10@3125 Gb/s MPO (QSFP) transceiver to meet in order to be categorized as an EN standard product. Since different variants are permitted@ product marking details are given in 4.6. Intermateability All products conforming to the requirements of this standard are meant to intermate and give the specified performance level. The intention is that this will be true irrespective of the manufacturing source(s) of the product. Operating environment The tests selected@ combined with the severity and duration@ are representative of a backplane/back panel indoor application typically in a data centre environment derived from a customer premises protected environment as defined in the EN 50173 series and the ISO/IEC 11801 series and specified as category C in EN 61753-1. Reliability Whilst the anticipated service life expectancy of the product in this environment is 10 years@ compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognized reliability assessment programme. Quality assurance Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognized quality assurance programme.

EN 50377-18-1-2019由CENELEC - European Committee for Electrotechnical Standardization 發布于 2019-04-01，并于 2019-05-06 實施。

EN 50377-18-1-2019的歷代版本如下：

• 2019年04月01日 EN 50377-18-1-2019

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 EN 50377-18-1-2019 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

EN 50377-18-1-2019

發布日期

2019年04月01日

實施日期

2019年05月06日

廢止日期

無

中國標準分類號

/

國際標準分類號

/

發布單位

CENELEC - European Committee for Electrotechnical Standardization

引用標準

30

適用范圍

Product definition This European Standard contains the initial@ start of life dimensional@ optical@ mechanical and environmental performance requirements (excluding electrical requirements) to be met by a 12 fibre multimode PPS MPO plug terminated on EN 60793-2-10 category A1a.3a or A1a.3b fibre and a 4+4x10@3125 Gb/s MPO (QSFP) transceiver to meet in order to be categorized as an EN standard product. Since different variants are permitted@ product marking details are given in 4.6. Intermateability All products conforming to the requirements of this standard are meant to intermate and give the specified performance level. The intention is that this will be true irrespective of the manufacturing source(s) of the product. Operating environment The tests selected@ combined with the severity and duration@ are representative of a backplane/back panel indoor application typically in a data centre environment derived from a customer premises protected environment as defined in the EN 50173 series and the ISO/IEC 11801 series and specified as category C in EN 61753-1. Reliability Whilst the anticipated service life expectancy of the product in this environment is 10 years@ compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognized reliability assessment programme. Quality assurance Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognized quality assurance programme.

EN 50377-18-1-2019系列標準