single point test

single point test, Total:436 items.

In the international standard classification, single point test involves: Semiconducting materials, Cutting tools, Earthworks. Excavations. Foundation construction. Underground works, Elements of buildings, Electrical accessories, Protection against fire, Buildings, Vocabularies, Thermodynamics and temperature measurements, Products of the chemical industry, Construction materials, Protection of and in buildings, Linear and angular measurements, Road engineering, Construction of airports, Welding, brazing and soldering, Aerospace fluid systems and components, Soil quality. Pedology, Energy and heat transfer engineering in general, Tyres, Road vehicles in general, Protection against crime, Particle size analysis. Sieving, Glass, Lubricants, industrial oils and related products, Equipment for petroleum and natural gas industries, Paints and varnishes, Metalliferous minerals, Electronic display devices, Sugar. Sugar products. Starch, Plastics, Raw materials for rubber and plastics, Acoustics and acoustic measurements, Petroleum products in general, Analytical chemistry, Internal combustion engines, Non-textile floor coverings, Motor cycles and mopeds, Telecommunication systems, Semiconductor devices, Ventilators. Fans. Air-conditioners, Surface treatment and coating, Veterinary medicine, Testing of metals, Textile fibres, Fibre optic communications, Cereals, pulses and derived products, Equipment for the chemical industry, Mechanical testing, Civil engineering in general, Paint ingredients, Chipless working equipment, Fuels, Rubber and plastics products, Organic chemicals, Agricultural machines, implements and equipment, Paper products, Equipment for children, Electronic tubes, Telecontrol. Telemetering, Edible oils and fats. Oilseeds, Non-metalliferous minerals, Milk and milk products, Shipbuilding and marine structures in general.

Korean Agency for Technology and Standards (KATS), single point test

KS D 0260-1999 TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
KS B 3708-2002(2012) Method of life test for single point tools
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS B 3708-2012 Method of life test for single point tools
KS B ISO 3685-2023 Tool-life testing with single-point turning tools
KS D 0260-1989(1994) TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
KS B ISO 3685-2018 Tool-life testing with single-point turning tools
KS B ISO 3685:2018 Tool-life testing with single-point turning tools
KS B 0813-2021 Method of life test for single point carbide tools
KS B 0813-2016(2021) Method of life test for single point carbide tools
KS B 0850-1991 Method of inspection for spot weld
KS R 1017-2006(2011) Starting test method of automobiles
KS B 0528-2001 Resistance spot welding-Destructive tests of welds-Methods for the fatigue testing of spot welded joints
KS R 1017-1981 Starting test method of automobiles
KS L 2505-2014 Testing method for strain point of glass
KS L 2401-1995 Testing method for annealing point and strain point of glass by beam bending
KS L 2504-2001(2011) Glass-Viscosity and viscometric fixed points－Part 6：Determination of softening point
KS L 2401-2019 Testing method for annealing point and strain point of glass by beam bending
KS M 0007-2021 Testing methods for melting point of chemical products
KS B 7391-2013 Testing methods for ignition magnetos
KS M 1212-2021 Testing methods for high boiling point solvents
KS M 0007-2016 Testing methods for melting point of chemical products
KS M ISO 28580:2011 Passenger car, truck and bus tyres-Methods of measuring rolling resistance-Single point test and correlation of measurement results
KS M ISO 28580:2016 Passenger car, truck and bus tyres－Methods of measuring rolling resistance－Single point test and correlation of measurement results
KS M ISO 4652-2019 Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
KS M 3823-2008(2018) Testing methods for softening point of epoxide resins
KS B 6720-2004(2009) Testing methods of filtration equipments for claifying
KS B 6720-1994 Testing methods of filtration equipments for claifying
KS C 6927-2013 Test methods for chromatic dispersion of single-mode optical fibers
KS M 2010-2023 Testing methods for flash point of crude oil and petroleum products —Determination of flash point — Tag closed cup method
KS M ISO 28580-2016 Passenger car, truck and bus tyres－Methods of measuring rolling resistance－Single point test and correlation of measurement results
KS M ISO 28580-2016(2021) Passenger car, truck and bus tyres－Methods of measuring rolling resistance－Single point test and correlation of measurement results
KS M ISO 28580:2022 Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results
KS C 6926-2006 TEST METHODS FOR ATTENUATION OF SINGLE-MODE OPTICAL FIBERS
KS F 2285-1996(2001) METHOD OF TEST FOR OSCILLATION OF EQUIPMENT UNITS FOR DWELLINGS
KS B ISO 7256-1:2004 Sowing equipment-Test methods-Part 1:Single seed drills(precision drills)
KS M ISO 28580-2022 Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results
KS C 6926-2001 TEST METHODS FOR ATTENUATION OF SINGLE-MODE OPTICAL FIBERS
KS B ISO 7256-1:2014 Sowing equipment — Test methods — Part 1: Single seed drills(precision drills)
KS F 2285-1986 METHOD OF TEST FOR OSCILLATION OF EQUIPMENT UNITS FOR DWELLINGS
KS L 1616-2022 Test methods of iso-electric point of fine ceramic powders
KS M ISO 4652-1-2010 Rubber compounding ingredients－Carbon black－Determination of specific surface area by nitrogen adsorption methods－Part 1：Single-point procedures

Defense Logistics Agency, single point test

DLA MIL-DTL-39024/15 C-2008 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; SINGLE TEST POINT, LOW VOLTAGE, .080
DLA MIL-DTL-39024/1 D VALID NOTICE 1-2012 Connectors, Electrical, Test Point Type, Panel Type; Single Test Point (Threaded), Low Voltage
DLA DSCC-DWG-86024 REV B-2000 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE, SINGLE TEST POINT, .040
DLA MIL-DTL-39024/15 C VALID NOTICE 1-2013 Connectors, Electrical, Test Point Type, Printed Wiring Type; Single Test Point, Low Voltage, .080
DLA MIL-DTL-39024/13 C-2008 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; SINGLE TEST POINT (RIGHT ANGLE, 2-LEG MOUNTING), LOW VOLTAGE, .080
DLA MIL-DTL-39024/14 C VALID NOTICE 1-2013 Connectors, Electrical, Test Point Type, Panel Type; Single Test Point Subminiature (Push-In), Low Voltage, .080
DLA MIL-DTL-39024/13 D-2011 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; SINGLE TEST POINT (RIGHT ANGLE, 2-LEG MOUNTING), LOW VOLTAGE, .080
DLA MIL-DTL-39024/18 F VALID NOTICE 1-2013 Connectors, Electrical, Test Point Type, Printed Wiring Type; Micro-Miniature, Single Test Point (2-Leg Mounting), Low Voltage, .080 Inch
DLA MIL-DTL-39024/14 C-2008 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT SUBMINIATURE (PUSH-IN), LOW VOLTAGE, .080
DLA A-A-55469/5 VALID NOTICE 1-2001 CONNECTORS, ELECTRICAL, PLUGS, TIP, SINGLE, MINIATURE, TEST POINT PLUG, .080

Military Standards (MIL-STD), single point test

MIL MIL-DTL-39024/10F-2015 Jack, Tip (Test Point Type, Panel Type; Single Test Point (Threaded) Low Voltage, .080)
MIL MIL-DTL-39024/15C-2008 Connectors, Electrical, Test Point Type, Printed Wiring Type; Single Test Point, Low Voltage, .080
MIL MIL-DTL-39024/3C-2018 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING; SINGLE TEST POINT (RIGHT ANGLE, 2-LEG MOUNTING), LOW VOLTAGE
MIL MIL-DTL-39024/5D-2018 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (HOLE MOUNTING, PUSH-FIT), LOW VOLTAGE
MIL MIL-DTL-39024/12F-2018 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (HOLE MOUNTING, PUSH-FIT), LOW VOLTAGE
MIL MIL-DTL-39024/1D-2003 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (THREADED), LOW VOLTAGE (SUPERSEDING MIL-C-39024/1C)
MIL MIL-DTL-39024/2D-2003 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (THREADED), HIGH VOLTAGE (SUPERSEDING MIL-C-39024/2C)
MIL MIL-C-39024/19-1991 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; BANANA RECEPTACLE, SINGLE TEST POINT (NO S/S DOCUMENT)
MIL MIL-DTL-39024/15B-2003 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; SINGLE TEST POINT, LOW VOLTAGE, .080 (SUPERSEDING MIL-C-39024/15A)
MIL MIL-DTL-39024/14C-2008 Connectors, Electrical, Test Point Type, Panel Type; Single Test Point Subminiature (Push-In), Low Voltage, .080
MIL MIL-DTL-39024/10E-2003 JACK, TIP (TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (THREADED) LOW VOLTAGE, .080) (SUPERSEDING MIL-J-39024/10D)
MIL MIL-DTL-39024/13D-2011 Connectors, Electrical, Test Point Type, Printed Wiring Type; Single Test Point (Right Angle, 2-Leg Mounting), Low Voltage, .080
MIL MIL-DTL-39024/11G-2012 Jack, Tip, Test Point Type, Printed Wiring Type, Single Test Point, Right Angle, 2-Leg Mounting, Low Voltage, .080
MIL MIL-C-39024/5C-1991 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (HOLE MOUNTING, PUSH-FIT), LOW VOLTAGE (SUPERSEDING MIL-C-39024/5B)
MIL MIL-DTL-39024/18E-2003 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; MICRO-MINIATURE, SINGLE TEST POINT (2-LEG MOUNTING), LOW VOLTAGE, .080 INCH
MIL MIL-DTL-39024/18F-2008 Connectors, Electrical, Test Point Type, Printed Wiring Type; Micro-Miniature, Single Test Point (2-Leg Mounting), Low Voltage, .080 Inch
MIL MIL-DTL-39024/12E-2003 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (HOLE MOUNTING, PUSH-FIT), LOW VOLTAGE (SUPERSEDING MIL-C-39024/12D)
MIL MIL-C-39024/3B-1991 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING; SINGLE TEST POINT (RIGHT ANGLE, 2-LEG MOUNTING), LOW VOLTAGE (SUPERSEDING MIL-C-39024/3A)
MIL MIL-DTL-39024/4D-2003 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; SINGLE TEST POINT (RIGHT ANGLE, 3-LEG MOUNTING), LOW VOLTAGE (SUPERSEDING MIL-C-39024/4C)
MIL MIL-DTL-39024/14B-2003 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT SUBMINIATURE (POUSH-IN), LOW VOLTAGE, .080 (SUPERSEDING MIL-C-39024/14A)
MIL MIL-C-39024/1C-1991 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (THREADED), LOW VOLTAGE (SUPERSEDING MIL-C-39024/1B) (S/S BY MIL-DTL-39024/1D)
MIL MIL-C-39024/2C-1991 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (THREADED), HIGH VOLTAGE (SUPERSEDING MIL-C-39024/2B) (S/S BY MIL-DTL-39024/2D)
MIL MIL-C-39024/18D-1988 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; MICRO-MINIATURE, SINGLE TEST POINT (2-LEG MOUNTING), LOW VOLTAGE, .080 INCH (SUPERSEDING MIL-C-39024/18C)
MIL MIL-DTL-39024/13B-2003 CONNECTORS, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; SINGLE TEST POINT (RIGHT ANGLE, 2-LEG MOUNTING), LOW VOLTAGE, .080 (SUPERSEDING MIL-C-39024/13A)
MIL MIL-J-39024/10D-1984 JACK, TIP (TEST POINT TYPE, PANEL TYPE; SINGLE TEST POINT (THREADED), LOW VOLTAGE, .080) (SUPERSEDING MIL-J-39024/10C) (S/S BY MIL-DTL-39024/10E)
MIL MIL-C-39024/11E-1985 JACK, TIP, TEST POINT TYPE, PRINTED WIRING TYPE, SINGLE TEST POINT, RIGHT ANGLE, 2-LEG MOUNTING, LOW VOLTAGE, .080 (S/S BY MIL-J-39024/11F)
MIL MIL-C-39024/15A-1978 CONNECTOR, ELECTRICAL, TEST POINT TYPE, PRINTED WIRING TYPE; SINGLE TEST POINT, LOW VOLTAGE, .080 (SUPERSEDING MIL-C-39024/15) (S/S BY MIL-DTL-39024/15B)
MIL MIL-C-28901/7-1980 CONNECTOR, ELECTRIAL, PLUGS, TIP, SINGLE, (TEST POINT PLUG) (S/S BY A-A-55469/7)

The American Road & Transportation Builders Association, single point test

AASHTO T 272-2018 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO T 73-2003 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
AASHTO T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
AASHTO T 177-2017(R2021) Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
AASHTO T 272-2018(2022) Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
AASHTO T 272-2016 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (ASTM Designation: C78-15b)

Society of Automotive Engineers (SAE), single point test

SAE ARP901B-2017 Bubble-Point Test Method
SAE ARP901-1968 Bubble-Point Test Method
SAE ARP901B-2022 Bubble-Point Test Method
SAE ARP901A Bubble-Point Test Method
SAE ARP901B Bubble-Point Test Method
SAE ARP901 Bubble-Point Test Method
SAE ARP901A-2001 Bubble-Point Test Method
SAE ARP6991-2023 MPR Micropitting Test Method

American Society for Testing and Materials (ASTM), single point test

ASTM E546-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
ASTM C1757-13 Standard Test Method for ?Determination of One-Point, Bulk Water Sorption of Dried Concrete
ASTM D5604-21 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D3828-16a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3934-90(2001) Standard Test Method for Flash/No Flash Test8212;Equilibrium Method by a Closed-Cup Apparatus
ASTM D3828-98 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM RR-D02-1009 1974 D0092-Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM RR-D02-1008 1992 D0092-Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D3828-97 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D2389-83(1994) Method for determination of minimum ignition pressure of vapor phase of single propellant
ASTM E576-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
ASTM RR-D02-1371 1995 D5853-Test Method for Pour Point of Crude Oils
ASTM D3934-90(2007) Standard Test Method for Flash/No Flash Test-Equilibrium Method by a Closed-Cup Apparatus
ASTM D3934-90(1996)e1 Standard Test Method for Flash/No Flash Test8212;Equilibrium Method by a Closed-Cup Apparatus
ASTM D5604-96(2012) Standard Test Methods for Precipitated Silicamdash;Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM F651-80 Median method for single-point calibration
ASTM RR-D16-1028 2002 D0852-Test Method for Solidification Point of Benzene
ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
ASTM D5793-18 Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
ASTM D56-01 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM RR-D02-1464 1999 D6450-Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM RR-D32-1019 1986 D4567-Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM C138/C138M-10a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM D93-20 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D56-05(2010) Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D56-00 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D93-02 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D3828-12a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM RR-D32-1037 1994 D4567-Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM C1624-05(2010) Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM RR-D02-1670 2009 D3828-Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828-05 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3941-90(1996)e1 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
ASTM D56-05 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D93-80e1 Standard Test Methods for Flash Point By Pensky-Martens Closed Tester
ASTM RR-E37-1023 1998 E1719-Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM D3941-90(2007) Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
ASTM D56-16 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM RR-D02-1715 2011 D7683-Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
ASTM RR-D02-1010 1974 D3828-Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D92-12b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-12a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D3941-90(2001) Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
ASTM D56-70 Standard Method Of Test For Flash Point By Tag Closed Tester
ASTM D2500-02 Standard Test Method for Cloud Point of Petroleum Products
ASTM D2500-02e1 Standard Test Method for Cloud Point of Petroleum Products
ASTM RR-D02-1572 2004 D2386-Test Method for Freezing Point of Aviation Fuels
ASTM RR-D02-1003 1970 D0056- Test Method for Flash Point by Tag Closed Cup Tester
ASTM D93-90e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
ASTM D6450-05 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D4567-19 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D36/D36M-09 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D5551-95(2019) Standard Test Method for Determination of the Cloud Point of Oil
ASTM E1719-24 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM C1624-05 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM D56-21 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D1310-86(1997)e1 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D1310-01(2007) Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D5551-95(2012) Standard Test Method for Determination of the Cloud Point of Oil
ASTM RR-D02-1133 1980 D3944-Test Method for Solidification Point of Petroleum Wax
ASTM C336-71(2005) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
ASTM D7236-16a(2021) Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D1310-01 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM F40-83 Standard Method for PREPARING MONOCRYSTALLINE TEST INGOTS OF SILICON BY THE VERTICAL-PULLING (CZOCHRALSKI) TECHNIQUE
ASTM C78/C78M-18 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D7236-16a Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D56-21a Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM C78/C78M-21 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D56-93 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D4567-25 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D92-16 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM C598-24 Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D92-16b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM RR-D02-1900 2019 D8254-Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester
ASTM D1929-19 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D93-15a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D92-05a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D5440-93(2003) Standard Test Method for Determining the Melting Point of Fats and Oils
ASTM D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM C78/C78M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM RR-D02-1581 2004 D7094-Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM RR-D02-1880 2017 D7094-Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D4567-99 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D5985-02 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
ASTM RR-D01-1112 1999 D6090-Test Method for Softening Point Resins (Mettler Cup and Ball Method)
ASTM D5551-95(2006) Standard Test Method for Determination of the Cloud Point of Oil
ASTM D5551-95(2001) Standard Test Method for Determination of the Cloud Point of Oil
ASTM RR-D02-1312 1993 D0097-Standard Test Method for Pour Point of Petroleum Products
ASTM D4567-03 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D56-87 Standard Test Method for Flash Point by Tag Closed Tester

Hebei Provincial Standard of the People's Republic of China, single point test

DB13/T 5096-2019 Test method for clearing point of nematic thermotropic liquid crystal for monochrome display

Underwriters Laboratories (UL), single point test

UL 217-1993 Single and multiple station smoke detectors
UL 217-1997 Single and multiple station smoke alarms
UL 539-2022 Single and multiple station heat detectors
UL 539-1991 Single and multiple station heat detectors
UL 217-2006 UL Standard for Safety Single and Multiple Station Smoke Alarms Sixth Edition; Reprint with Revisions Through and Including May 22, 2007
UL 217-2022 UL Standard for Safety Single and Multiple Station Smoke Alarms
UL 2034-1996 Single and multiple station carbon monoxide alarms
UL 2034-2022 UL Standard for Safety Single and Multiple Station Carbon Monoxide Alarms
UL 2034-2017 UL Standard for Safety Single and Multiple Station Carbon Monoxide Alarms (Fourth Edition; Reprint with Revisions Through and Including September 4@ 2018)
UL 2034-2018 UL Standard for Safety Single and Multiple Station Carbon Monoxide Alarms (Fourth Edition; Reprint with Revisions Through and Including September 4@ 2018)

未注明發布機構, single point test

DVGW G 622 E:2021-02 Single Testing of Gas Appliances on the Location of Installation
JIS A 1514:1982 Test Method of Dew Condensation for Windows and Doors
NASM1312-20-2022 FASTENER TEST METHODS, METHOD 20, SINGLE SHEAR

Group Standards of the People's Republic of China, single point test

T/COS 003-2019 Test method for positioning precision of GNSS receiverPart 1: single point positioning testing
T/SBX 026-2019 Determination of Melting Point of Liquid Crystal Monomer by Differential Scanning Calorimetry
T/IAWBS 012-2019 Test Method for Surface Quality and Micropipe?Density?of Silicon Carbide?Single Crystal?Polishing Wafers——Confocal and Differential Interferometry Optics
T/CITS 0111-2024 Test method for oil and gas pipe — Full scale four-point bending test method

American National Standards Institute （ANSI), single point test

ANSI/UL 539-2009 Single and Multiple Station Heat Alarms
ANSI/ASA S2.32-1982 Methods for the Experimental Determination of Mechanical Mobility, Part 2: Measurements Using Single-Point Translational Excitation
ANSI/ASTM D1929:1996 Test Method for Ignition Properties of Plastics (08.01)
ANSI/ASHRAE 86-2013(2016) Methods of Testing the Floc Point of Refrigeration-Grade Oils
ANSI/ASTM D1120:1994 Test Method for Boiling Point of Engine Coolants

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, single point test

GB/T 14457.3-1993 Isolate and synthetic aroma chemicals. Method for determination of melting point
GB/T 29040-2012 Test methods of rolling resistance for motor vehicle tyres.Single point test and correlation of measurement results
GB/T 28196-2011 Determination of annealing point and strain point for glass
GB/T 10322.8-2009 Iron ores.Single-point determination of specific surface area.Nitrogen adsorption method
GB/T 28195-2011 Determination of softening point for glass
GB/T 43724-2024 Single liquid crystal test method
GB/T 20450-2006 Test method for ignition temperature of activated carbon
GB/T 12571-1990 Methods of measurement of monochrome display tubes
GB/T 45133-2025 Gas analysis Determination of the composition of mixed gases by comparison of one-point and two-point calibration
GB/T 27635-2011 Protocol of identification of Stenotrophomonas maltophilia from Ictalurus punctatus Rafinsque
GB/T 40320-2021 Measuring method for mechanical melting temperature of aluminum alloy
GB/T 11349.2-1989 Experimental determination of mechanical mobility--Measurements using single-point translation excitation with an attached vibration exciter
GB 616-1988 General method for determination of boiling point of chemical reagents
GB/T 616-1988 Chemical reagent--General method for the determination of boiling point
GB/T 616-2006 Chemical reagent General method for the determination of boiling point
GB/T 9343-1988 Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test
GB/T 3789.21-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic reference point
GB/T 9026-2000 Performance requirements and test methods for marker beacon

British Standards Institution (BSI), single point test

BS 4140-23:1987 Methods of test for aluminium oxide - Determination of specific surface area by nitrogen adsorption (single-point method)
BS EN 13036-4:2011(2013) Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface. The pendulum test
BS EN 13036-4:2011 Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface. The pendulum test
BS EN 13036-5:2019 Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface. The pendulum test
BS ISO 4652:2012 Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
BS EN ISO 3679:2022 Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
BS ISO 28580:2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results
BS ISO 28580:2018 Passenger car, truck and bus tyre rolling resistance measurement method. Single point test and correlation of measurement results
22/30441177 DC BS EN ISO 3679. Determination of flash point Method for flash no-flash and flash point by small scale closed cup tester
BS 3900-A9:1986 Methods of test for paints. Determination of flashpoint (closed cup equilibrium method)
BS ISO 12963:2017 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS ISO 12963:2017+A1:2020 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS 3900-A14:1986 Methods of test for paints-Determination of flashpoint (rapid equilibrium method)
BS 5293-11:1995 Sampling and testing carbon black for use in the rubber industry - Method for determination of specific surface area by nitrogen adsorption methods using single-point procedures
BS 3900-G3:1973 Methods of tests for paints resistance to spotting by liquids
BS PD CEN/TR 17309:2019 Test methods for environmental characterization of solid matrices. Guide to flash point testing
08/30162351 DC BS ISO 28580. Passenger car, truck and bus tyres. Methods of measuring rolling resistance. Single point test and correlation of measurement results

CZ-CSN, single point test

CSN 70 7111-1987 Spectacle monofocal lenses Tolerances, technical specifications and testing methods
CSN 66 8222-1981 Electrieal igniting agenfcs. Test of the present igniting agent. Methods of testing
CSN 56 0176 Cast.5-1978 Testing methods for starch. determination of specks.
CSN 35 8536-1968 Methods of testing characteristics of electronic tubes
CSN 66 8221-1981 Electrical igniting agents. Test of ignition impulse. Methods of testing
CSN 58 8754-1994 Methods of test for fats and oils etermination of melting point by clearing
CSN 37 6108-1986 Ignifors for use during blasting. Testing methods
CSN 56 0146-1964 Methods of test for sweets and durable pastry. Common testing methods
CSN 65 6212-1988 Testing of minerál oils. Flash and fire oints by Clevcland open cup

Ente Nazionale Italiano di Unificazione, single point test

UNI ISO 3685:1981 Tool-life testing with single-point turning tools.
UNI EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester
UNI EN 12221-2:2001 Changing units for domestic use - Test methods.

Swedish Institute for Standards, single point test

SS-ISO 3685:1994 Tool-life testing with single-point turning tools
ISO 3685 Tool-life testing with single-point turning tools
SS-EN ISO 3679:2022 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
ASTM C1624-05(2015)-10 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing

GCC Standardization Organization, single point test

GSO ISO 3685:2013 Tool-life testing with single-point turning tools
GSO 2187:2011 Glass -Test Method for Softening Point
GSO ISO 4652:2013 Rubber compounding ingredients -- Carbon black -- Determination of specific surface area by nitrogen adsorption methods -- Single-point procedures
BH GSO ASTM D92:2024 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
GSO ISO 28580:2023 Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results
GSO ASTM D93:2021 Test Method for Flash Point by Pensky - Martens Close Cup Tester.
GSO 501:1994 Paints and Varanishes - Methods of test - Determination of flash point - (Closed Cup Method ).
GSO 2344:2014 Single-ply wet-creped paper towelling- Test methods
GSO ASTM D97:2022 Standard Test Method for Pour Point of Petroleum Products

Standard Association of Australia （SAA）, single point test

AS 1289.3.9.2:2006 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the cone liquid limit of soil - One-point method
AS 1289.3.1.2:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the liquid limit of a soil - One point Casagrande method (subsidiary method)
AS 1141.0:1999 Methods for sampling and testing aggregates - List of methods

Tianjin Provincial Standard of the People's Republic of China, single point test

DB12/T 051.1-2003 Comprehensive energy-saving monitoring method for key energy-consuming units

American Society of Mechanical Engineers (ASME), single point test

ASME B94.55M-1985(R2014) Single point turning tool life test
ASME B94.55M-1985(R2019) Tool Life Testing with Single - Point Turning Tools

National Association of Corrosion Engineers (NACE), single point test

NACE Paper 11173-2018 Sour testing of corrosion resistant alloys: Comparison of four-point bend and uniaxial tensile test methods

GM Daewoo, single point test

GMKOREA EDS-T-7931-2013 Flash point test method of wax

European Committee for Standardization (CEN), single point test

EN 15659:2009 Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units

Indonesia Standards, single point test

SNI 15-1574-1989 Test method for melting point of glass
SNI 15-1021-1989 Test method for annealing point and strain point of glass
SNI 06-0528-1989 Melt flow index test method for polypropylene
SNI 06-0705-1989 Petroleum products and their derivatives, Flash point test method according to Abel
SNI 05-3052-1992 Unitary air conditioners, Test method
SNI 06-4988-1999 Test method for pour point of petroleum products
SNI 07-4076-1996 Method of free bend test for butt welded joint
SNI 09-4406-1997 Test method of speedometers for motor cycles
SNI 08-0590-1989 Staple synthetic fibres, Test method for length (by measurement of single fibres).
SNI 13-6168-1999 Test methods of in situ uniaxial compressive strength for determining deformability and strength of weak rock

The Directorate General of Specifications and Metrology (DGSM) , single point test

OS GSO ISO 3685:2013 Tool-life testing with single-point turning tools
OS GSO ISO 4652:2013 Rubber compounding ingredients -- Carbon black -- Determination of specific surface area by nitrogen adsorption methods -- Single-point procedures
OS GSO 501:1994 Paints and Varanishes - Methods of test - Determination of flash point - (Closed Cup Method ).
OS GSO 2344:2014 Single-ply wet-creped paper towelling- Test methods

Professional Standard - Petroleum, single point test

SY 6626-2005 Electronic single and multi-point inclinometer
SY/T 6626-2005 Electronic survey system
SY 5474-1992 Measuring rules for single and multi-point photographic inclinometers with gyroscope
SY 5624-1993 Measurement regulations for magnetic single and multi-point photographic inclinometers

Kingdom of Bahrain Testing and Metrology Directorate, single point test

BH GSO ISO 3685:2016 Tool-life testing with single-point turning tools
BH GSO ISO 28580:2023 Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results
BH GSO 2344:2015 Single-ply wet-creped paper towelling- Test methods
BH GSO ASTM D56:2024 Standard Test Method for Flash Point by Tag Closed Cup Tester
BH GSO ASTM D97:2023 Standard Test Method for Pour Point of Petroleum Products

Association Francaise de Normalisation, single point test

NF R12-754:2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results.
NF T45-105:2020 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Single-point procedures
NF T20-219:1987 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption. Single-point method.
NF R12-754*NF ISO 28580:2019 Passenger car, truck and bus tyre rolling resistance measurement method - Single point test and correlation of measurement results
NF ISO 4652:2020 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Single-point procedures

IN-BIS, single point test

IS 7820-1975 Test method for ignition temperature
IS 6897-1973 Tannin test method
IS 13749-1993 Automotive vehicle. Determination of H-point. Method of test
IS 1210-1978 Methods of testing tar and bituminous materials: Determination of flash and fire points
IS 1209-1978 Methods of testing tar and bituminous materials: Determination of flash and fire points
IS 10706-1983 Test methods for single sideband PLC terminals
IS 1448 Pt.20-1982 Test methods for petroleum and its products [P: 20] Determination of flash point by ABEL method

BR-ABNT, single point test

ABNT P-MB-295-1964 Test methods for smoke point detection
ABNT P-MB-350-1964 Test method for grease dropping point detection
ABNT MB-50-1964 Test Methods for Flash Point and Fire Point Testing (Cleveland Open Containers)

Malaysia Standards, single point test

MS 914-1984 Cleveland open cup method for testing flash point and fire point
MS 874-1984 Aviation turbine fuel smoke point test method

Professional Standard - Automobile, single point test

QC/T 416-1999 Test methods for ignition systems

Australian/New Zealand Standard (AU-AS/NZS), single point test

AS/NZS 4456.13:1997 Masonry units and segmental pavers - Methods of test, Method 13: Determining pitting due to lime particles
AS/NZS 2106.5:1999 Methods for the determination of the flash point of flammable liquids (closed cup), Part 5: Flash/no flash test - Closed cup equilibrium method
AS/NZS 1462.15:1996 Methods of test for PVC pipes and fittings - Method for determination of vinyl chloride monomer content
AS/NZS 2098.4:1996 Methods of test for veneer and plywood, Method 4: Measurement of dimensions for sheets of veneer and plywood

RO-ASRO, single point test

SR 110-7-1995 Sugar. Methods of analysis. Test of black points

AASHTO - American Association of State Highway and Transportation Officials, single point test

T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2018 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
T 272-2016 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T73-1989 Standard Method of Test for Flash Point by Pensky-Martens Closed Tester
T 48-2006 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup
T48-1994 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup
T 48-2017 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup
T48-1999 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup (Twentieth Edition)

Japanese Industrial Standards Committee (JISC), single point test

JIS D 4234:2009 Passenger car, truck and bus tyres -- Methods of measuring rolling resistance -- Single point test and correlation of measurement results
JIS R 3103:1995 Method of test for strain point of glass
JIS K 7234:1986 Testing methods for softening point of epoxide resins
JIS K 3832:1990 Testing methods for bubble point of membrane filters
JIS F 2030:1978 Single point mooring pipes

BE-NBN, single point test

NBN V 21-005-1988 Milk - Determination of freezing point - Thermistor cryoscope method

Acoustical Society of America (ASA), single point test

ASA S2.32-1982 Methods for the Experimental Determination of Mechanical Mobility. Part II: Measurements Using Single-Point Translational Excitation

German Institute for Standardization, single point test

DIN 10964:1985 Sensory testing methods - Simple descriptive test
DIN 10964:1996-02 Sensory testing methods - Simple descriptive test
DIN EN ISO 3679 E:2013-10 Determination of flash point Methods for determining flash point, no flash point and flash point using a small closed cup tester (draft)
DIN EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
DIN EN ISO 3679 E:2022-05 Determination of flash point Methods for determining flash point, no flash point and flash point using a small closed cup tester (draft)
DIN EN ISO 3679:2022-05 Draft Document - Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO/DIS 3679:2022); German and English version prEN ISO 3679:2022
DIN 66132:1975 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Duembgen

Danish Standards Foundation, single point test

DANSK DS/ISO 3679:2022 Determination of flash point – Method for flash no-flash and flash point by small scale closed cup tester
DS/ISO 7256/1:1984 Sowing equipment. Test methods. Part 1: Single seed drills (precision drills)

International Organization for Standardization (ISO), single point test

ISO 3679:2022 Determination of flash point – Method for flash no-flash and flash point by small scale closed cup tester
ISO 28580:2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results
ISO 28580:2018 Passenger car, truck and bus tyre rolling resistance measurement method - Single point test and correlation of measurement results
ISO 4652:2012 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Single-point procedures
ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
ISO 7256-1:1984 Sowing equipment; Test methods; Part 1; Single seed drills (precision drills)

Gosstandart of Russia, single point test

GOST 6253-1978 Motorcycles, motorscooters. Methods of tests
GOST 30562-1997 Milk. Determination of freezing point. Thermistor cryoscope method

Professional Standard - Commodity Inspection, single point test

SN/T 735.15-1999 Determination of flash point of aromatic oils, isolated and synthetic fragrances for export (closed cup method)
SN/T 0735.4-1997 Essential oils ,perfumery isolates and synthetics for export.Determination of congealing point
SN/T 0735.15-1999 Essential oils,perfumery isolates and synthetics for export.Determination of flash point.Closed cup method

Professional Standard - Electron, single point test

SJ/T 11039-1996 Test method for annealing point and strain point of electronic glass
SJ/T 10333-1993 Methods of measurement for uni-junction transistors
SJ/T 11038-1996 Test method for softening point of electronic glass

Professional Standard - Post and Telecommunication, single point test

YD/T 1589-2006 The Test Methods for Interworking Gateway in Point to Point Short Message Interworking
YD/T 1377.3-2008 Test Methods of Service and Protocol of Peer to Peer Short Message lnterworking between Networks Part 3: Test Methods of Peer to Peer Short Message interworking between PLMN and PLMN
YD/T 1377.2-2005 Testing methods of service and protocol of peer to peer short message interworking between networks Part 2: Testing methods of peer to peer short message interworking between PSTN and PSTN
YD/T 1377.1-2005 Testing methods of service and protocol of peer to peer short message interworking between networks Part 1: Testing methods of peer to peer short message interworking between PSTN and PLMN
YD/T 2033.3-2009 Testing methods for IP video terminal equipment.Part 3:Multipoint Control Unit
YD/T 1403-2005 The technical requirment and test method of service qualification of peer to peer short message interworking between networks
YD/T 1718-2007 Testing Methods for Service and Protocol in Peer to Peer Multimedia Messaging Service lnterworking

Bureau of Indian Standards, single point test

IS/ISO 28580-2009 Passenger Car, Truck and Bus Tyres - Methods of Measuring Rolling Resistance - Single Point Test and Correlation of Measurement Results
IS 1209-2021 Methods for Testing Tar and Bituminous Materials Determination of flash point and fire point

CU-NC, single point test

NC 04-63-1985 Materials Testing. Welded Joints Methods for Hardness Determination

IPC - Association Connecting Electronics Industries, single point test

IPC TM-650 5.2-1973 Listing of Test Method Publications

AT-ON, single point test

ONORM DIN 10319-1992 Determination of freezing point of milk - Thermistor cryoscope method
ONORM C 1128-1970 Testing of Mineral Oils; Test for Dropping Point of Lubricating Grease (ASTM-Meihod)
ONORM S 4114-1982 Mountainering ropes; test of Single and double ropes; staue testmethods
ONORM S 5271-1997 Planar scintigraphy and Single photon emission computed tomography - Constancy tests of functional Performance characteristics

PL-PKN, single point test

PN C26000-1958 SYNTHETICS TANNINS -- TEST METHODES
PN C04016-1955 Petroleum products -- Measurement of freezing point by test tube method
PN M53802-1960 Thermometets for Te??lng Flash - Point by th? Marcus*on Me?hod
PN M53801-1960 Thermomefers for Testing Flash-Poin? by the Abal- Pen$ky Me?hod

Professional Standard - Machinery, single point test

JB/T 6730-1993 Magnetoelectricity motor lighting system - Test method
JB/T 6730-2021 Magneto Ignition System Test Methods
JB/T 13545-2018 Measurement method of static load deformation of closed wide-table single-axis multi-point press

Military Standard of the People's Republic of China-General Armament Department, single point test

GJB 772.109-1990 Explosives Test Methods Freezing Point Determination
GJB 772.110-1991 Explosives Test Methods Melting Point Determination Capillary Method
GJB 1927A-2021 Gallium arsenide single crystal material testing method
GJB 1927-1994 Gallium arsenide single crystal material testing method

SG-SPRING SG, single point test

SS 11 Pt.16-1986 Methods Of Sampling And Test For Oils And Fats Part 16 : Determination Of Melting Point (Slip Point)

State Grid Corporation of China, single point test

Q/GDW 11346-2014 Video conferencing system multi-point control unit (MCU) and terminal test specification

Professional Standard - Building Materials, single point test

JC/T 752-1984 Quartz glass annealing point test method (drawing method)
JC/T 751-1984 Test method for softening point of quartz glass (wire drawing method)
JC/T 751~752-1984(2015) Test method for softening point of quartz glass and annealing point of quartz glass (wire drawing method)

Standards Norway, single point test

NS 3208-1977 Determination of dew point for sealed glazing units
SN-CEN/TR 17309:2019 Test methods for environmental characterization of solid matrices — Guide to flash point testing

AIA/NAS - Aerospace Industries Association of America Inc., single point test

NASM1312-20-1997 Fastener Test Methods; Method 20 Single Shear

Spanish Association for Standardization (UNE), single point test

AENOR UNE 56860:1990 ARMORED DOOR HOLE UNIT. TEST METHODS
AENOR UNE 48039:1956 BASIC LEAD SULFATE. CHARACTERISTICS AND TEST METHODS
UNE 40152:1984 METHOD OF TEST FOR THE MEASURE OF LIBRE LENGTH BY INDIVIDUAL FIBRES TESTING

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), single point test

ASHRAE 128-1989 Method of Rating Unitary Spot Air Conditioners
ASHRAE 86-2013 Methods of Testing the Floc Point of Refrigeration-Grade Oil

VN-TCVN, single point test

TCVN 2699-1995 Petroleum products.Test method for flash and fine points by open cup
TCVN 7170-2006 Aviation fuels.Test method for determination of freezing point
TCVN 7498-2005 Bitumen.Test method for flash and fire points by Cleveland open cup tester

Professional Standard - Pharmaceutical Packaging, single point test

YBB 0014(03)-2003 Vinyl Chloride Monomer Determination Method (Trial)

IL-SII, single point test

S.I.662-1967 TESTING OF MILK: DETERMINATION OF THE FREEZING POINT (RAPID METHOD)

South African Bureau of Standard, single point test

SANS 3001-GR10:2008 Civil engineering test methods Part GR10: Determination of the one-point liquid limit, plastic limit, plasticity index and linear shrinkage

TH-TISI, single point test

TIS 1710.1-1998 Rubber compounding ingredients.carbon black.determination of specific surface area by nitrogen adsorption methods.part 1: single-point procedures

SE-SIS, single point test

SIS SS-ISO 6518/2:1985 Ignition systems - Part 2: Test methods

Professional Standard - Ferrous Metallurgy, single point test

YB/T 5172-2016 Test method for wood preservative oil Flash point determination method
YB/T 5172-1993 Test method for wood preservative oil - Determination of flash point

Professional Standard - Public Safety Standards, single point test

GA/T 2196-2024 Multi-channel psychological test Monocular standard rope problem test method

National Metrological Verification Regulations of the People's Republic of China, single point test

JJG 1166-2019 Single Point Acoustic Doppler Current Measuring Instrument

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, single point test

JEDEC JEP79-1969 Life Test Methods for Photoconductive Cells

Association of German Mechanical Engineers, single point test

DVS 2916-1978 Testing of spot weldings

TR-TSE, single point test

TS 120-1964 STANDARD METHODS OF TEST FOR SOFTENING POINT OF BITUMINOUS MATERIALS
TS 123-1978 STANDARD METHODS OF TEST FOR FLASH AND F?RE POINTS OF PETROLEUM PRODUCTS BY CLEVELAND ?PEN CUP

Aerospace Industries Association, single point test

AIA NASM1312-20-1997 Fastener Test Methods; Method 20 Single Shear FSC 53GP