Resin curing degree test standard

Resin curing degree test standard, Total:73 items.

In the international standard classification, Resin curing degree test standard involves: Construction materials, Plastics, Materials for aerospace construction, Ground service and maintenance equipment, Raw materials for rubber and plastics, Products of the chemical industry, Organic chemicals, Processes of the textile industry, Analytical chemistry.

CZ-CSN, Resin curing degree test standard

CSN 64 0341-1990 Plastics. Termosetting casting resins. etermination of temperature increa- e of epoxy resins during curing
CSN 64 0810-1983 Testing ol plastics. Dctermination moulding properties of thermosetingresins on the plastometer KK
CSN 64 0342-1990 1'lastics. 'JVrrriosetting easting resins. Jetcrinination of viscosity incrrnso of joxy resms (hiriiig cm-hig

Korean Agency for Technology and Standards (KATS), Resin curing degree test standard

KS M 3822-2023 Testing methods for viscosity of epoxide resins and hardners
KS M 3822-1987 Testing methods for viscosity of epoxide resins and hardners
KS M 3822-2008 Testing methods for viscosity of epoxide resins and hardners
KS M 3821-2023 Testing methods for specific gravity of epoxide resins and hardeners
KS M 3829-2003(2018) Total amine value test method for amine-based hardener of epoxy resin
KS M 3821-1987 Testing methods for specific gravity of epoxide resins and hardeners
KS M 3821-2008 Testing methods for specific gravity of epoxide resins and hardeners
KS M 3820-2011 General rules for testing methods of epoxide resins and hardeners
KS K 0717-2005 TESTING METHOD FOR COLOUR FASTNESS TO RESIN FINISH
KS M 3823-2008(2018) Testing methods for softening point of epoxide resins

Indonesia Standards, Resin curing degree test standard

SNI 06-6446.2-2000 Test methods for viscosity of epoxy resins and hardeners

PL-PKN, Resin curing degree test standard

PN C89085-24-1988 Epoxy resins Methóds of testing Determination of properties of cured resins
PN C89082-17-1988 Unsaturated polyester resins Methods of testing Determination of properties of cured resins

RU-GOST R, Resin curing degree test standard

GOST 21970-2015 Unsaturated polyester resins. Methods for determination of maximum temperature during the setting
GOST 22349-1977 Setting casting resins. Preparation of test specimens
GOST R 56211-2014 Uncured epoxy resins. Specification

SCC, Resin curing degree test standard

AS/NZS 4266.21:1996 Reconstituted wood-based panels - Methods of test, Method 21: Determination of over-cure or under-cure of resin
11/30211364 DC BS ISO 14322. Plastics. Epoxy resins. Determination of degree of cure of cured epoxy resins by differential scanning calorimetry
JIS K 6941:2019 UV curable resin and thermosetting resin -- Continuous measurement method of shrinkage rate
HOLDEN HN 1464-2001 Epoxy Resin - Rapid Cure

British Standards Institution (BSI), Resin curing degree test standard

BS ISO 4216:2021 Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
BS 6319-5:1984 Testing of resin and polymer/cement compositions for use in construction - Methods for determination of density of hardened resin compositions
20/30412517 DC BS ISO 4216. Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method

Professional Standard - Aerospace, Resin curing degree test standard

QJ 1708-1989 Dielectric Test Method for Resin Curing Process

SAE - SAE International, Resin curing degree test standard

SAE AMS3699A-1992 Resin System@ Epoxy@ Carbon Microballoon Filled 135 Degrees C (275 Degrees F) Cure
SAE ARP5144A-2017 Heat Application for Thermosetting Resin Curing
SAE AMS3135D-1984 Coating Material@ Silicone Resin 205 Degrees C (400 Degrees F) Cure
SAE AMS3727B-1995 RESIN@ EPOXY@ MATRIX@ THERMOSETTING MODERATE TEMPERATURE RESISTANT@ UNFILLED

International Organization for Standardization (ISO), Resin curing degree test standard

ISO 4216:2021 Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method

General Motors Corporation (GM), Resin curing degree test standard

GM 9986062-1995 Epoxy, Two-Part, Room Temperature Cure, Resin
GM 9985791-1997 Resin, Impregnation, Heat-Cured Revision A
GM 9985682-1997 Resin, Impregnation, Heat-Cured Revision C
GM 9985734-1997 Resin, Impregnation, Heat-Cured Revision C

Society of Automotive Engineers (SAE), Resin curing degree test standard

SAE AMS3699A-1993 (Noncurrent)Resin System, Epoxy, Carbon Microballoon Filled 135 Degrees C (275 Degrees F) Cure
SAE AMS3135-1959 SILICONE RESIN COATING MATERIAL 400F CURE
SAE ARP5144-2011 Heat Application for Thermosetting Resin Curing
SAE ARP5144-2000 Heat Application for Thermosetting Resin Curing
SAE AMS3372-1969 SILICONE RESIN, ELASTOMERIC High Tear Strength, Elevated Temperature Cure
SAE AMS3372A-2001 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
SAE AMS3727A-1993 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3727-1988 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3699A-2022 Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure
SAE AMS3699-2011 RESIN SYSTEM, EPOXY, CARBON MICROBALLOON FILLED 135°C (275°F) Cure
SAE AMS3135E-2001 (Noncurrent)Coating Material, Silicone Resin 205 Degrees C (400 Degrees F) Cure

未注明發布機構, Resin curing degree test standard

DIN 16945 Testing of resins, hardeners and accelerators, and catalyzed resins
DIN 16945:1976 Testing of resins, hardeners and accelerators, and catalyzed resins
SAE ARP5144A-2023 Heat Application for Thermosetting Resin Curing

German Institute for Standardization, Resin curing degree test standard

DIN 16945:1989-03 Testing of resins, hardeners and accelerators, and catalyzed resins
DIN 16945:1989 Testing of resins, hardeners and accelerators, and catalyzed resins
DIN 54407:2015 Testing of ion exchange resins - Determination of bead size distribution
DIN 54407:2003 Testing of ion exchange resins - Determination of bead size distribution

Association Francaise de Normalisation, Resin curing degree test standard

NF EN ISO 3673-2:2012 Plastiques - Résines époxydes - Partie 2 : préparation des éprouvettes et détermination des propriétés des résines époxydes réticulées

Japanese Industrial Standards Committee (JISC), Resin curing degree test standard

JIS K 7233:1986 Testing methods for viscosity of epoxide resins and hardeners

American Society for Testing and Materials (ASTM), Resin curing degree test standard

ASTM D4640-86(2017) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(1996) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(2001) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(2009) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(2022) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D2566-86 Test Method for Linear Shrinkage of Cured Thermosetting Casting Resins During Cure
ASTM D5028-96 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-96(2003)e1 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

PT-IPQ, Resin curing degree test standard

NP 236-1989 Pitch Determination of mollification temperature

RO-ASRO, Resin curing degree test standard

STAS 12593/1-1987 HOT CURING FURANIC RESIN FOR ABRASIVES

KR-KS, Resin curing degree test standard

KS M 3821-2008(2023) Testing methods for specific gravity of epoxide resins and hardeners

Professional Standard - Chemical Industry, Resin curing degree test standard

HG/T 2345-1992 Sulfonic acid curing agent for casting resin

Professional Standard - Ferrous Metallurgy, Resin curing degree test standard

YB/T 5095-2005 Determination of acidity or alkalinity of solid coumarone-indene resin

工業和信息化部, Resin curing degree test standard

YB/T 5095-2016 Method for determination of pH of solid coumaron-indene resin

(U.S.) Ford Automotive Standards, Resin curing degree test standard

FORD FLTM BO 004-01-2001 PARTICLE SIZE TEST FOR RESINS

Taiwan Provincial Standard of the People's Republic of China, Resin curing degree test standard

CNS 13065-1992 Methods of Test for Viscosity of Epoxy Resins and Hardeners