IEC 61215-1-3-2016

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules

IEC 61215-1-3-2016 發布歷史

This part of IEC 61215 lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open- air climates, as defined in IEC 60721-2-1. This document is intended to apply to all thin-film amorphous silicon (a-Si; a-Si/μc-Si) based terrestrial flat plate modules. As such, it addresses special requirements for testing of this technology supplementing IEC 61215-1:2016 and IEC 61215-2:2016 requirements for testing. This document does not apply to modules used with concentrated sunlight although it may be utilized for low concentrator modules (1 to 3 suns). For low concentration modules, all tests are performed using the current, voltage and power levels expected at the design concentration. The object of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in climates described in the scope. The actual lifetime expectancy of modules so qualified will depend on their design, their environment and the conditions under which they are operated. This document defines PV technology dependent modifications to the testing procedures and requirements per IEC 61215-1:2016 and IEC 61215-2:2016.

IEC 61215-1-3-2016由國際電工委員會 IX-IEC 發布于 2016-12。

IEC 61215-1-3-2016在國際標準分類中歸屬于: 27.160 太陽能工程。

IEC 61215-1-3-2016的歷代版本如下：

• 2016年12月 IEC 61215-1-3-2016 地面光伏(PV)模組. 設計質量和型式批準. 第1-3部分: 檢測薄膜非晶硅基電池光伏(PV)模組的特殊要求
• 2021年02月01日 IEC 61215-1-3-2021 地面光伏(PV)模組. 設計質量和型式批準. 第1-3部分: 檢測薄膜非晶硅基電池光伏(PV)模組的特殊要求
• 2022年03月28日 IEC 61215-1-3-2021/AMD1-2022 修改件1.地面光伏（PV）組件.設計鑒定和型式認證.第1-3部分:薄膜非晶硅基光伏（PV）組件試驗的特殊要求

IEC 61215-1-3-2016 由 IEC 61646-2008 變更而來。

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 IEC 61215-1-3-2016 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

IEC 61215-1-3-2016

發布日期

2016年12月

實施日期

廢止日期

無

國際標準分類號

27.160

發布單位

IX-IEC

被代替標準

IEC 82/1183/FDIS-2016 IEC 61646-2008

適用范圍

This part of IEC 61215 lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open- air climates, as defined in IEC 60721-2-1. This document is intended to apply to all thin-film amorphous silicon (a-Si; a-Si/μc-Si) based terrestrial flat plate modules. As such, it addresses special requirements for testing of this technology supplementing IEC 61215-1:2016 and IEC 61215-2:2016 requirements for testing. This document does not apply to modules used with concentrated sunlight although it may be utilized for low concentrator modules (1 to 3 suns). For low concentration modules, all tests are performed using the current, voltage and power levels expected at the design concentration. The object of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in climates described in the scope. The actual lifetime expectancy of modules so qualified will depend on their design, their environment and the conditions under which they are operated. This document defines PV technology dependent modifications to the testing procedures and requirements per IEC 61215-1:2016 and IEC 61215-2:2016.

IEC 61215-1-3-2016系列標準

誰引用了IEC 61215-1-3-2016 更多引用