IEC 62211-2017
電感元件.可靠性管理

Inductive components - Reliability management

IEC 62211-2017 發布歷史

This document is applicable to inductive components (chokes and transformers) based on magnetically soft materials. These are components based especially on laminated iron sheets, iron powder materials (including alloys), as well as ferrites and amorphous or crystalline metal band cores. Winding assemblies mean wire winding assemblies as well as multilayer and stacking technologies of planar technology including coils based on non-magnetic materials. Discrete type components and the different types of surface mount inductive components (SMD) are also considered in this document. The reliability of assemblies of inductive components based on several technologies such as glued types, types with clamps (clips), impregnated (varnished) types as well as (vacuum) potted types can also be checked with this document. The subsequent determinations can be applied either for the primary qualification of inductive components or for all manners of requalification examinations (design, process, change of production facility). They can also be applied for the monitoring of products out of actual manufacturing processes. This document sets up a broad basis of electric and mechanical criteria of failure test procedures. If manufacturers advertise compliance with this standard in their data sheets, customers can request data to demonstrate compliance with this standard. The customers can also request the product to be in compliance with this standard by a recognised body. Customers and manufacturers can elect to perform additional testing and acceptance criteria different than those defined in this standard.

IEC 62211-2017由國際電工委員會 IX-IEC 發布于 2017-01。

IEC 62211-2017 在中國標準分類中歸屬于: L15 敏感元器件及傳感器，在國際標準分類中歸屬于: 31.060.01 電容器綜合。

IEC 62211-2017 發布之時，引用了標準

• IEC 60068-2-1-2007 環境試驗.第2-1部分:試驗.試驗A:低溫
• IEC 60068-2-2-2007 環境測試.第2-2部分:試驗.試驗B:干熱
• IEC 60068-2-6-2007 環境試驗.第2-6部分:試驗.試驗Fc:振動(正弦波)
• IEC 60068-2-14-2009 環境試驗.第2-14部分:試驗.試驗N:溫度的改變
• IEC 60068-2-27-2008 環境試驗.第2-27部分:試驗.試驗Ea和指南:沖擊
• IEC 60068-2-30-2005 環境試驗.第2-30部分:試驗.試驗Db:循環濕熱試驗(12h+12h循環)
• IEC 60068-2-58-2015 環境試驗.第2-58部分:試驗.試驗Td:表面安裝元器件(SMD)用可焊性、耐金屬化溶融和耐焊接熱的試驗方法
• IEC 60068-2-78-2012 環境試驗.第2-78部分:試驗.試驗箱:濕熱、穩態
• IEC 60424-1-2015 鐵氧體磁芯.表面缺陷極限指南.第1部分:總規范
• IEC 60424-2-2015 鐵氧體磁芯.表面缺陷極限指南.第2部分:RM-磁芯
• IEC 60424-3-2015 鐵氧體磁芯.表面缺陷極限指南.第3部分:ETD芯、EER芯、EC芯和E芯
• IEC 60424-4-2015 鐵氧體磁芯.表面缺陷極限指南.第4部分:環形磁芯
• IEC 60424-5-2009 鐵氧體磁芯.表面缺陷的限值指南.第5部分:平面磁芯

IEC 62211-2017的歷代版本如下：

• 2003年10月 IEC 62211-2003 電感元件.可靠性管理
• 2017年01月 IEC 62211-2017 電感元件.可靠性管理

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 IEC 62211-2017 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

IEC 62211-2017

發布日期

2017年01月

實施日期

廢止日期

無

中國標準分類號

L15

國際標準分類號

31.060.01

發布單位

IX-IEC

引用標準

IEC 60068-2-1-2007 IEC 60068-2-2-2007 IEC 60068-2-6-2007 IEC 60068-2-14-2009 IEC 60068-2-27-2008 IEC 60068-2-30-2005 IEC 60068-2-58-2015 IEC 60068-2-78-2012 IEC 60424-1-2015 IEC 60424-2-2015 IEC 60424-3-2015 IEC 60424-4-2015 IEC 60424-5-2009 IEC 60424-8-2

被代替標準

IEC 51/1150/FDIS-2016 IEC 62211-2003

適用范圍

This document is applicable to inductive components (chokes and transformers) based on magnetically soft materials. These are components based especially on laminated iron sheets, iron powder materials (including alloys), as well as ferrites and amorphous or crystalline metal band cores. Winding assemblies mean wire winding assemblies as well as multilayer and stacking technologies of planar technology including coils based on non-magnetic materials. Discrete type components and the different types of surface mount inductive components (SMD) are also considered in this document. The reliability of assemblies of inductive components based on several technologies such as glued types, types with clamps (clips), impregnated (varnished) types as well as (vacuum) potted types can also be checked with this document. The subsequent determinations can be applied either for the primary qualification of inductive components or for all manners of requalification examinations (design, process, change of production facility). They can also be applied for the monitoring of products out of actual manufacturing processes. This document sets up a broad basis of electric and mechanical criteria of failure test procedures. If manufacturers advertise compliance with this standard in their data sheets, customers can request data to demonstrate compliance with this standard. The customers can also request the product to be in compliance with this standard by a recognised body. Customers and manufacturers can elect to perform additional testing and acceptance criteria different than those defined in this standard.

誰引用了IEC 62211-2017 更多引用