ASTM B762-90(2016)
金屬和無機涂層變量抽樣的標準試驗方法
Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
ASTM B762-90(2016) 發布歷史
ASTM B762-90(2016)由美國材料與試驗協會 US-ASTM 發布于 1990。
ASTM B762-90(2016) 在中國標準分類中歸屬于: A29 材料防護。
ASTM B762-90(2016) 發布之時，引用了標準
* 在 ASTM B762-90(2016) 發布之后有更新，請注意新發布標準的變化。
ASTM B762-90(2016)的歷代版本如下：
- 2021年 ASTM B762-21 金屬和無機涂層的取樣變量的標準指南
- 1990年 ASTM B762-90(2016) 金屬和無機涂層變量抽樣的標準試驗方法
- 1990年 ASTM B762-90(2010) 金屬涂層和無機物涂層的不同抽樣的標準試驗方法
- 1990年 ASTM B762-90(2005) 金屬涂層和無機物涂層的不同抽樣
- 1990年 ASTM B762-90(1999) 金屬涂層和無機物涂層的不同抽樣的標準試驗方法
5.1 Sampling inspection permits the estimation of the overall quality of a group of product articles through the inspection of a relatively small number of product articles drawn from the group.
5.2 The specification of a sampling plan provides purchasers and sellers a means of identifying the minimum quality level that is considered to be satisfactory.
5.3 Because sampling plans yield estimates of the quality of a product, the results of the inspection are subject to error. Through the selection of a sampling plan, the potential error is known and controlled.
5.4 Sampling inspection is used when a decision must be made about what to do with a quantity of articles. This quantity may be a shipment from a supplier, articles that are ready for a subsequent manufacturing operation, or articles ready for shipment to a customer.
5.5 In sampling inspection, a relatively small number of articles (the sample) is selected randomly from a larger number of articles (the inspection lot); the sample is inspected for conformance to the requirements placed on the articles. Based on the results, a decision is made whether or not the lot conforms to the requirements.
5.6 Since only a portion of a production lot is inspected, the quality of the uninspected articles is not known. The possibility exists that some of the uninspected articles are nonconforming. Therefore, basic to any sampling inspection plan is the willingness of the buyer to accept lots that contain some nonconforming articles. The number of nonconforming articles in accepted lots is controlled by the size of the sample and the criteria of acceptance that are placed on the sample.
5.7 Acceptance sampling plans are used for the following reasons:
5.7.1 When the cost of inspection is high and the consequences of accepting a nonconforming article are not serious.
5.7.2 When 1008201;% inspection is fatiguing and boring and, therefore, likely to result in errors.
5.7.3 When inspection requires a destructive test, sampling inspection must be used.
5.8 In acceptance sampling by variables, the coating characteristic of each article in the sample is measured. Using the arithmetic mean of these values, the standard deviation of the process, and the factor k that is found in the Tables, a number is calculated (see 9.3). If this number equals or exceeds the specified minimum, the inspection lot conforms to the requirements. If it is less, the lot does not conform. If the standard deviation of the process is not known, the standard deviation of the sample is calculated and used.
5.9 The use of a sampling plan involves the balancing of the costs of ......
- 標準號
- ASTM B762-90(2016)
- 發布
- 1990年
- 發布單位
- 美國材料與試驗協會
- 替代標準
- ASTM B762-21
- 當前最新
- ASTM B762-21
- 引用標準
- ASTM B602 ASTM B697 MIL-STD-105 MIL-STD-414