ISO 5393:2017
用于螺紋緊固件的回轉式氣動裝配工具.性能試驗方法

Rotary tools for threaded fasteners - Performance test method

ISO 5393:2017 發布歷史

ISO 5393:2017由國際標準化組織 IX-ISO 發布于 2017-11-01。

ISO 5393:2017 在中國標準分類中歸屬于: J48 氣動工具，在國際標準分類中歸屬于: 25.140.10 氣動工具。

ISO 5393:2017 用于螺紋緊固件的回轉式氣動裝配工具.性能試驗方法的最新版本是哪一版？

最新版本是 ISO 5393:2017 。

ISO 5393:2017 發布之時，引用了標準

• ISO 14253-1:2017 產品幾何量技術規范(GPS).工件的測量檢驗和測量設備.第1部分:按規范檢驗一致性或不一致性的判定規則
• ISO 2787:1984 鑿巖機械與氣動工具 性能試驗
• ISO 3534-1:2006 統計學.詞匯和符號.第1部分:概率和基本統計術語
• ISO 3857-3:1989 壓縮機、風動工具和風動機械 詞匯 第3部分:風動工具和風動機械 兩種語言版
• ISO 5391:2003 風動工具和機器.詞匯
• ISO 5941:1979 壓縮機、風動工具和風動機械 優選壓力
• ISO 80000-1:2009 數量和單位.第1部分:通論

ISO 5393:2017的歷代版本如下：

• 2017年 ISO 5393:2017 用于螺紋緊固件的回轉式氣動裝配工具.性能試驗方法
• 1994年 ISO 5393:1994 用于螺紋緊固件的回轉式氣動裝配工具 性能試驗方法
• 1981年 ISO 5393:1981 螺紋緊固件用旋轉式氣動裝配工具.性能試驗

This document specifies a laboratory performance test method for power assembly tools (referred throughout the document as “tool”) for installing threaded fasteners. It provides a method for the measurement of torque repeatability (scatter) — over a range of torque rates as specified in this document, — over a range of torque adjustment as defined by the manufacturer, and — over a number of operating cycles as defined by the manufacturer. It provides a method for the measurement of the precision of the built-in torque measurement system for tools incorporating such a feature. See Annex E. It gives instructions on equipment parameters, what to test for and how to evaluate and present the test data. It is applicable to tools — of any power source, e.g. pneumatic, hydraulic, and electric, including battery-powered, — which apply torque in a generally continuous manner, and — within the torque range 0,5 Nm to 2000 Nm. Outside this range, it is acceptable to modify the test method providing that the modification is documented in the test report. It is not applicable to — impact or impulse wrenches, — ratchet wrenches or wrenches with ratcheting clutches, and — other tools which advance fasteners in discontinuous increments, overcoming static friction at each increment. It allows a test to be performed at any test torque level; however, in order to minimize the number of test joints necessary for a wide range of test torque levels, a list of preferred test torque levels is provided in Annex A.

采用 ISO 5393 的發行版本有：

• BS ISO 5393:2017 用于螺紋緊固件的旋轉工具 性能測試方法
• KS B ISO 5393-2005(2010) 螺紋緊固件用旋轉工具性能試驗方法
• KS B ISO 5393:2005 用于螺紋緊固件的回轉式氣動裝配工具.性能試驗方法
• KS B ISO 5393:2013 用于螺紋緊固件的回轉式氣動裝配工具 性能試驗方法
• NF E51-361*NF ISO 5393:2018 螺紋緊固件用旋轉工具 性能試驗方法
• NF ISO 5393:2018 螺紋緊固件旋轉工具 操作特性試驗方法

標準號

ISO 5393:2017

發布

2017年

發布單位

國際標準化組織

當前最新

ISO 5393:2017

 

 

引用標準

ISO 14253-1:2017 ISO 2787:1984 ISO 3534-1:2006 ISO 3857-3:1989 ISO 5391:2003 ISO 5941:1979 ISO 80000-1:2009 VDA Band 5-2011

ISO 5393:2017相似標準

推薦