ISO 28219:2017
包裝.線性條形碼和二維符號的標注和直接產品標記

Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols

標準號

ISO 28219:2017

發布

2017年

中文版

GB/T 41977-2022 (修改采用的中文版本)

發布單位

國際標準化組織

當前最新

ISO 28219:2017

 

 

引用標準

ANSI/CEA 706-1997 ASTM D1000-93 ASTM E29-93a ISO 21067:2007 ISO 3166-1:2013 ISO/IEC 15415:2011 ISO/IEC 15416:2016 ISO/IEC 15417:2007 ISO/IEC 15418:2016 ISO/IEC 15420:2009 ISO/IEC 15424:2008 ISO/IEC 15434:2006 ISO/IEC 15438:2015 ISO/IEC 15459-1:2014 ISO/IEC 15459-2:2015 ISO/IEC 15459-3:2014 ISO/IEC 15459-4:2014 ISO/IEC 16022:2006 ISO/IEC 16388:2007 ISO/IEC 18004:2015 ISO/IEC 19762:2016 ISO/IEC 24723:2010 ISO/IEC 24724:2011 ISO/IEC 24728:2006 ISO/IEC 646:1991 ISO/IEC TR 24720:2008

適用范圍

This document — defines minimum requirements for identifying items, — provides guidelines for item marking with machine-readable symbols, — covers both labels and direct marking of items, — includes testing procedures for label adhesive characteristics and mark durability, — provides guidance for the formatting on the label of data presented in linear bar code, twodimensional symbol or human-readable form, — is intended for applications which include, but are not limited to, support of systems that automate the control of items during the processes of: — production, — inventory, — distribution, — field service, — point of sale, — point of care, — repair, and — is intended to include, but it is not limited to, multiple industries including: — automotive, — aerospace, — chemical, — consumer items, — electronics, — health care, — marine, — rail, — telecommunications. The location and application method of the marking are not defined (these will be reviewed and agreed upon by suppliers and manufacturers and their trading partners before implementing this document). ? 1 ? This document does not supersede or replace any applicable safety or regulatory marking or labelling requirements. This document is meant to satisfy the minimum item marking requirements of numerous applications and industry groups and as such its applicability is to a wide range of industries, each of which may have specific implementation guidelines for it. This document is to be applied in addition to any other mandated labelling direct-marking requirements. The labelling and direct marking requirement of this document and other standards can be combined into one label or marking area or appear as separate labels or marking areas. This document uses the terms “part marking” and “item marking” interchangeably. Unless otherwise stated, this document will use the term “item marking” to describe both the labelling and direct part marking (DPM) of an item, where DPM includes, but is not limited to, altering (e.g. dot peen, laser etch, chemical etch), as well as additive type processes (e.g. ink jet, vacuum deposition). The purpose of this document is to establish the machine-readable (linear, two-dimensional, and composite symbols) and human-readable content for direct marking and labelling of items, parts, and components. This document provides a means for items, parts and components to be marked, and read in either fixtured or hand-held scanning environments at any manufacturer’s facility and then read by customers purchasing items for subsequent manufacturing operations or for final end use. Intended applications include, but are not limited to, supply chain applications, e.g. inventory, distribution, manufacturing, quality control, acquisition, transportation, supply, repair, and disposal. The figures are illustrative and not necessarily to scale or to the quality requirements specified in this document.

ISO 28219:2017相似標準

推薦

誰引用了ISO 28219:2017 更多引用