ASTM D5144-08(2016)
核發電廠保護涂料標準使用的標準指南

Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants

被代替

標準號

ASTM D5144-08(2016)

發布

2008年

發布單位

美國材料與試驗協會

替代標準

ASTM D5144-08(2021)

當前最新

ASTM D5144-08(2021)

 

 

引用標準

ANSI N101.2 ANSI N101.4 ANSI N5.12 ASTM C177 ASTM D3843 ASTM D3911 ASTM D3912 ASTM D4060 ASTM D4082 ASTM D4227 ASTM D4228 ASTM D4537 ASTM D4538 ASTM D4541 ASTM D5139 ASTM D5163 ASTM D7167 ASTM D7230 ASTM D7234 ASTM D7491 ASTM E1461 ASTM E1530 ASTM E648 ASTM E84

適用范圍

4.1 This guide addresses the concerns of Regulation Guide 1.54 and USNRC Standard Review Plan 6.1.2, and the replacement of ANSI Standards N5.12, N101.2, and N101.4. This guide covers coating work on previously coated surfaces as well as bare substrates. This guide applies to all coating work in Coating Service Level I and III areas (that is, safety-related coating work). Applicable sections of this guide may also be used to evaluate and select protective coatings for Coating Service Level II areas where deemed appropriate by the licensee.

4.2 The testing referenced in this guide is particularly appropriate for safety-related coatings inside the reactor-containment. Other test methods may be used for assessing the suitability for service of safety-related coatings outside the reactor-containment. Criteria for qualification and performance monitoring of Coating Service Level III coatings shall be addressed in job specifications. Guidance for selecting and performance monitoring of Coating Service Level III coatings is provided Guides D7230 and D7167 respectively, and Sections 4.4 and 4.5 of EPRI 1019157 (formerly TR-109937 and 1003102.).

4.3 Users of this guide must ensure that coatings work complies not only with this guide, but also with the licensee's plant-specific quality assurance program and licensing commitments.

4.4 Safety-Related Coatings: 

4.4.1 The qualification of coatings for Coating Service Levels I and III are different even though they are both safety-related. This guide provides the minimum requirements for qualifying Coating Service Level I coatings and also provides guidance for additional qualification tests that may be used to evaluate Coating Service Level I coatings. This guide also provides guidance concerning selection of Coating Service Level III coatings.

4.4.2 Coating Service Level I Coatings: 

4.4.2.1 All Coating Service Level I coatings must be resistant to the effects of radiation and must be DBA qualified. The test specimens shall be prepared, irradiated and DBA tested and evaluated in accordance with the requirements of:

(a) Test Method D3911 or plant specific requirements as applicable,

(b) Test Method D4082, and

(c) Specification D5139.

4.4.2.2 In addition to the requirements of 4.4.2.1, Coating Service Level I coatings may be evaluated for additional qualities or may require application controls when deemed applicable by the job specifications or licensing commitments. The following documents provide guidance for application, possible additional testing or for the further evaluation of Coating Service Level I coatings when applicable:

(a) Test Method C177,

(b) Practice

ASTM D5144-08(2016)相似標準

推薦