IEC 61287-1:2014
軌道交通.安裝在鐵路機車上的電力變流器.第1部分:特性和試驗方法
Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
IEC 61287-1:2014 發布歷史
This part of IEC 61287 defines terminology@ service conditions@ general characteristics and test methods of electronic power converters onboard of rolling stock. This International Standard is applicable to power electronic converters mounted on board railway rolling-stock and intended for supplying ?C traction circuits; ?C auxiliary circuits of power vehicles@ coaches and trailers. The application of this standard extends as far as possible to all other traction vehicles@ including trolley-buses@ for example. This standard covers the complete converter assembly together with its mounting arrangements containing ?C semiconductor device assemblies; ?C integrated cooling systems; ?C integrated components like inductors@ capacitors@ transformers@ resistors@ contactors@ switches; ?C semiconductor drive units (SDU) and related sensors; ?C incorporated protection circuits. The following types of power sources are taken into consideration: ?C AC contact lines@ ?C DC contact lines@ ?C on-board supplies such as generators@ batteries and other electric power sources. This standard excludes converters which provide the electronic control supply for semiconductor drive units (SDU) and other supplies relevant to the converter operation such as sensors. NOTE 1 Electronic control equipment of converters and those sensors not related to semiconductor drive units and the printed circuit board assemblies of semiconductor drive units (SDU) are covered by IEC 60571. NOTE 2 Combined tests with the whole traction system or auxiliary supply system are not within the scope of this standard. E.g. rules for combined tests of a motor fed by a converter are given in the IEC 61377 series.
IEC 61287-1:2014由國際電工委員會 IX-IEC 發布于 2014-07-01，并于 2014-07-01 實施。
IEC 61287-1:2014 在中國標準分類中歸屬于: S35 牽引電氣設備。
IEC 61287-1:2014 發布之時，引用了標準
- IEC 60050-551:1998 國際電工詞匯 第551部分:電力電子學
- IEC 60050-811:1991 國際電工詞匯 第811章:電力牽引
- IEC 60076-10:2001 電力變壓器 第10部分：聲級的測定
- IEC 60077-1:1999 軌道交通.機車車輛用電氣設備 第1部分:一般運行條件和一般規則
- IEC 60270:2000 高電壓試驗技術.部分放電測量
- IEC 60310:2004 軌道交通.鐵路車輛用牽引變壓器和電感器
- IEC 60322:2001 軌道交通.機車車輛的電氣設備 開敞式結構電力電阻器的規則
- IEC 60349-1:2010 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:電子交流器供電的交流電動機除外的旋轉電機
- IEC 60349-2:2010 電力牽引.鐵路與道路車輛用旋轉電機.第2部分:電子變流器補償的交流電動機
- IEC 60349-4:2012 電力牽引.鐵路與道路車輛用旋轉電機.第4部分:與電子變流器相連接的永磁同步電機
- IEC 60384-4:2007 電子設備用固定電容器.第4部分:分規范.固體(MnO2)和非固體電解質的鋁電解電容器
- IEC 60529:1989 由外殼提供的防護等級(IP代碼)
- IEC 60571:2012 軌道交通.全部車輛用電子設備
- IEC 60721-3-5:1997 環境條件分類 第3部分:環境參數組及其嚴酷程度的分類分級 第5節:地面車輛上的設備
- IEC 60747-1:2006 半導體器件.第1部分:總則
IEC 61287-1:2014的歷代版本如下：
- 1995年07月 IEC 61287-1:1995 安裝在鐵路機車上的電力變流器 第1部分:特性和試驗方法
- 2005年09月 IEC 61287-1:2005 軌道交通.安裝在鐵路機車上的電力變流器.第1部分:特性和試驗方法
- 2014年07月01日 IEC 61287-1:2014 軌道交通.安裝在鐵路機車上的電力變流器.第1部分:特性和試驗方法
- 標準號
- IEC 61287-1:2014
- 發布日期
- 2014年07月01日
- 實施日期
- 2014年07月01日
- 廢止日期
- 無
- 中國標準分類號
- S35
- 發布單位
- 國際電工委員會
- 引用標準
- IEC 60050-551:1998 IEC 60050-811:1991 IEC 60076-10:2001 IEC 60077-1:1999 IEC 60270:2000 IEC 60310:2004 IEC 60322:2001 IEC 60349-1:2010 IEC 60349-2:2010 IEC 60349-4:2012 IEC 60384-4:2007 IEC 60529:1989 IEC 60571:2012 IEC 60721-3-5:1997 IEC 60747-1:2006 IEC
- 被代替標準
- IEC 9/1918/FDIS:2014 IEC 61287-1:2005
- 適用范圍
- This part of IEC 61287 defines terminology@ service conditions@ general characteristics and test methods of electronic power converters onboard of rolling stock. This International Standard is applicable to power electronic converters mounted on board railway rolling-stock and intended for supplying ?C traction circuits; ?C auxiliary circuits of power vehicles@ coaches and trailers. The application of this standard extends as far as possible to all other traction vehicles@ including trolley-buses@ for example. This standard covers the complete converter assembly together with its mounting arrangements containing ?C semiconductor device assemblies; ?C integrated cooling systems; ?C integrated components like inductors@ capacitors@ transformers@ resistors@ contactors@ switches; ?C semiconductor drive units (SDU) and related sensors; ?C incorporated protection circuits. The following types of power sources are taken into consideration: ?C AC contact lines@ ?C DC contact lines@ ?C on-board supplies such as generators@ batteries and other electric power sources. This standard excludes converters which provide the electronic control supply for semiconductor drive units (SDU) and other supplies relevant to the converter operation such as sensors. NOTE 1 Electronic control equipment of converters and those sensors not related to semiconductor drive units and the printed circuit board assemblies of semiconductor drive units (SDU) are covered by IEC 60571. NOTE 2 Combined tests with the whole traction system or auxiliary supply system are not within the scope of this standard. E.g. rules for combined tests of a motor fed by a converter are given in the IEC 61377 series.