ASTM E691-12
開展實驗室間研究以確定試驗方法精度的標準實施規程

Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

被代替

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 ASTM E691-12 前三頁，或者稍后再訪問。

您也可以嘗試購買此標準，
點擊右側 “立即購買” 按鈕開始采購（由第三方提供）。

標準號

ASTM E691-12

發布

2012年

發布單位

美國材料與試驗協會

替代標準

ASTM E691-13

當前最新

ASTM E691-23

 

 

適用范圍

5. Significance and UseTop Bottom

5.1 ASTM regulations require precision statements in all test methods in terms of repeatability and reproducibility. This practice may be used in obtaining the needed information as simply as possible. This information may then be used to prepare a precision statement in accordance with Practice E177.

5.2 Test Method and Protocol???In this practice, the term ???test method??? is used both for the actual measurement process and for the written description of the process, while the term ???protocol??? is used for the directions given to the laboratories for conducting the ILS.

5.3 Observations, Test Determinations and Test Results:

5.3.1 A test method often has three distinct stages, the direct observation of dimensions or properties, the arithmetic combination of the observed values to obtain a test determination, and the arithmetic combination of a number of test determinations to obtain the test result of the test method. In the simplest of test methods a single direct observation is both the test determination and the test result. For example, the test method may require the measurement of the mass of a test specimen prepared in a prescribed way. Another test method may require the measurement of the area of the test specimen as well as the mass, and then direct that the mass be divided by the area to obtain the mass per unit area of the specimen. The whole process of measuring the mass and the area and calculating the mass per unit area is a test determination. If the test method specifies that only one test determination is to be made, then the test determination value is the test result of the test method. Some test methods require that several determinations be made and the values obtained be averaged or otherwise combined to obtain the test result of the test method. Averaging of several determinations is often used to reduce the effect of local variations of the property within the material.

5.3.2 In this practice, the term ???test determination??? is used both for the process and for the value obtained by the process, except when ???test determination value??? is needed for clarity.

5.3.3 The number of test determinations required for a test result should be specified in each individual test method. The number of test results required for an interlaboratory study of a test method is specified in the protocol of that study.

5.4 Test Specimens and Test Units???In this practice a test unit is the total quantity of material needed for obtaining a test result as specified by the test method. The portion of the test unit needed for obtaining a single test determination is called a test specimen. Usually a separate test specimen is required for each test determination.

5.5 Precision, Bias, and Accuracy of a Test Method:

5.5.1 When a test meth..........

ASTM E691-12相似標準

誰引用了ASTM E691-12 更多引用