• <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • ASTM D6538-2010
    自動取樣器對廢水取樣的標準指南

    Standard Guide for Sampling Wastewater With Automatic Samplers


    ASTM D6538-2010 中,可能用到以下儀器設備

     

    梅特勒-托利多EasySampler自動取樣反應器

    梅特勒-托利多EasySampler自動取樣反應器

    梅特勒-托利多中國(Mettler-Toledo)

     

     

     

    非常抱歉,我們暫時無法提供預覽,您可以試試: 免費下載 ASTM D6538-2010 前三頁,或者稍后再訪問。

    點擊下載后,生成下載文件時間比較長,請耐心等待......

     



    標準號
    ASTM D6538-2010
    發布日期
    2010年
    實施日期
    廢止日期
    中國標準分類號
    Z16
    國際標準分類號
    13.060.45 (Examination of water in general)
    發布單位
    US-ASTM
    適用范圍

    This guide provides persons responsible for designing and implementing wastewater sampling programs with a summary of the types of automatic wastewater samplers, discusses the advantages and disadvantages of the different types of samplers and addresses recommended procedures for their use. The field settings are primarily, but not limited to, open channel flows in enclosed (e.g., sewer) systems or open (e.g., streams or open ditches, and sampling pressure lines) systems.

    1.1 This guide covers the selection and use of automatic wastewater samplers including procedures for their use in obtaining representative samples. Automatic wastewater samplers are intended for the unattended collection of samples that are representative of the parameters of interest in the wastewater body. While this guide primarily addresses the sampling of wastewater, the same automatic samplers may be used to sample process streams and natural water bodies.

    1.2 The guide does not address general guidelines for planning waste sampling activities (see Guide D4687), development of data quality objectives (see Practice D5792), the design of monitoring systems and determination of the number of samples to collect (see Practice D6311), operational details of any specific type of sampler, in-situ measurement of parameters of interest, data assessment and statistical interpretation of resultant data (see Guide D6233), or sampling and field quality assurance (see Guide D5612). It also does not address sampling groundwater.

    1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.3.1 Exception8212;The inch-pound units given in parentheses are for information only.


    ASTM D6538-2010 中可能用到的儀器設備





    Copyright ?2007-2022 ANTPEDIA, All Rights Reserved
    京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號



  • <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • 床戏视频