BS EN 61326-3-2-2008
測量、控制和實驗室用電氣設備.電磁兼容性(EMC)的要求.與安全相關的系統和用于與執行安全相關功能(功能安全)的設備用抗擾度要求.帶指定電磁環境的工業設施
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applicati
BS EN 61326-3-2-2008 發布歷史
The scope of IEC 61326-1 applies to this part of IEC 61326 but is limited to systems and equipment for industrial applications within a specified electromagnetic environment and intended to perform safety functions as defined in IEC 61508 with SIL 1-3. The electromagnetic environments encompassed by this product family standard are industrial, both indoor and outdoor, as they can be found in industrial applications with an electromagnetic environment having specified characteristics (for example, process industry). The difference between the electromagnetic environment covered by this standard compared to the general industrial environment (see IEC 61326-3-1) is due to the mitigation measures employed against electromagnetic phenomena leading to a specified electromagnetic environment. The environment of industrial application with a specified electromagnetic environment typically includes the following characteristics: – industrial area with limited access; – limited use of mobile transmitter; – dedicated cables for power supply and control, signal or communication lines; – separation between power supply and control, signal or communication cables; – factory building mostly consisting of metal construction; – overvoltage/lightning protection by appropriate measures (for example, metal construction of the building or use of protection devices); – pipe heating systems driven by a.c. main power may be present; – no high-voltage substation close to sensitive areas; – presence of CISPR 11 Group 2 ISM equipment using ISM frequencies only with low power; – competent staff; – periodical maintenance of equipment and systems; – mounting and installation guidelines for equipment and systems. A more detailed description of the above-mentioned typical characteristics is given in Annex B. Equipment and systems considered as “proven-in-use” according to IEC 61508 or IEC 61511 are excluded from the scope of IEC 61326-3-2. Fire alarm systems and security alarm systems intended for protection of buildings are excluded from the scope of IEC 61326-3-2.
BS EN 61326-3-2-2008由英國標準學會 GB-BSI 發布于 2009-01-31，并于 2009-01-31 實施。
BS EN 61326-3-2-2008 在中國標準分類中歸屬于: K60 電氣設備與器具綜合,L06 電磁兼容，在國際標準分類中歸屬于: 25.040.40 工業過程的測量和控制,33.100.20 抗擾度。
BS EN 61326-3-2-2008 發布之時，引用了標準
- IEC 61000-4-5-2005 電磁兼容性(EMC).第4-5部分:試驗和測量技術.電涌抗擾試驗
- IEC 61000-4-3-2006 電磁兼容性.第4-3部分:試驗和測量技術.輻射、射頻和電磁場的抗擾性試驗
- IEC 61000-4-4-2004 電磁兼容性(EMC).第4-4部分:試驗和測量技術.電快速瞬變/猝發抗擾度試驗
- IEC 61000-4-8-1993 電磁兼容性(EMC) 第4部分:試驗和測量技術 第8節:工頻磁場抗擾度試驗 基礎EMC出版物
- IEC 61000-4-11-2004 電磁兼容性(EMC).第4-11部分:試驗和測量技術.電壓暫降、短時中斷及電壓變化抗擾度試驗
- IEC 61000-4-29-2000 電磁兼容性(EMC).第4-29部分:試驗和測量技術.直流輸入電力端口上的電壓暫降、短時中斷和電壓變化抗擾度試驗
- IEC 61000-6-2-2005 電磁兼容性(EMC).第6-2部分:通用標準.工業環境的抗擾度
- IEC 61326-1-2005 測量、控制和實驗室用電氣設備.電磁兼容性要求.第1部分：一般要求
- IEC 61326-2-1-2005 測量、控制和實驗室用電氣設備.電磁兼容性要求.第2-1部分:特殊要求.用于電磁兼容性無保護設施的感光試驗和測量設備的試驗配置、操作條件和性能標準
- IEC 61326-2-2-2005 測量、控制和實驗室用電氣設備.電磁兼容性要求.第2-2部分:特殊要求.用于低壓分布系統的移動式試驗、測量和監測設備用試驗配置、操作條件和性能標準
- IEC 61326-2-3 用于測量 控制和實驗室使用的電氣設備 - Emc要求 - 第2-3部分:特殊要求 - 具有集成或遠程信號調理的傳感器的測試配置 操作條件和性能標準*， 2020-10-26 更新
* 在 BS EN 61326-3-2-2008 發布之后有更新，請注意新發布標準的變化。
BS EN 61326-3-2-2008的歷代版本如下：
- 2009年01月31日 BS EN 61326-3-2-2008 測量、控制和實驗室用電氣設備.電磁兼容性(EMC)的要求.與安全相關的系統和用于與執行安全相關功能(功能安全)的設備用抗擾度要求.帶指定電磁環境的工業設施
BS EN 61326-3-2-2008 測量、控制和實驗室用電氣設備.電磁兼容性(EMC)的要求.與安全相關的系統和用于與執行安全相關功能(功能安全)的設備用抗擾度要求.帶指定電磁環境的工業設施 由 BS EN 61326-1998 變更而來。
- 標準號
- BS EN 61326-3-2-2008
- 發布日期
- 2009年01月31日
- 實施日期
- 2009年01月31日
- 廢止日期
- 無
- 中國標準分類號
- K60;L06
- 國際標準分類號
- 25.040.40;33.100.20
- 發布單位
- GB-BSI
- 引用標準
- IEC 60050-161 IEC 61000-4-5-2005 IEC 61000-4-2-2001 IEC 61000-4-3-2006 IEC 61000-4-6-2004 IEC 61000-4-4-2004 IEC 61000-4-8-1993 IEC 61000-4-11-2004 IEC 61000-4-29-2000 IEC 61000-6-2-2005 IEC 61326-1-2005 IEC 61326-2-1-2005 IEC 61326-2-2-2005 IEC 61326-2-3
- 被代替標準
- 06/30144697 DC-2006 BS EN 61326-1998
- 適用范圍
- The scope of IEC 61326-1 applies to this part of IEC 61326 but is limited to systems and equipment for industrial applications within a specified electromagnetic environment and intended to perform safety functions as defined in IEC 61508 with SIL 1-3. The electromagnetic environments encompassed by this product family standard are industrial, both indoor and outdoor, as they can be found in industrial applications with an electromagnetic environment having specified characteristics (for example, process industry). The difference between the electromagnetic environment covered by this standard compared to the general industrial environment (see IEC 61326-3-1) is due to the mitigation measures employed against electromagnetic phenomena leading to a specified electromagnetic environment. The environment of industrial application with a specified electromagnetic environment typically includes the following characteristics: – industrial area with limited access; – limited use of mobile transmitter; – dedicated cables for power supply and control, signal or communication lines; – separation between power supply and control, signal or communication cables; – factory building mostly consisting of metal construction; – overvoltage/lightning protection by appropriate measures (for example, metal construction of the building or use of protection devices); – pipe heating systems driven by a.c. main power may be present; – no high-voltage substation close to sensitive areas; – presence of CISPR 11 Group 2 ISM equipment using ISM frequencies only with low power; – competent staff; – periodical maintenance of equipment and systems; – mounting and installation guidelines for equipment and systems. A more detailed description of the above-mentioned typical characteristics is given in Annex B. Equipment and systems considered as “proven-in-use” according to IEC 61508 or IEC 61511 are excluded from the scope of IEC 61326-3-2. Fire alarm systems and security alarm systems intended for protection of buildings are excluded from the scope of IEC 61326-3-2.