DIN EN 14637-2008
建筑五金件.防火/防煙門組件用電氣控制開放系統.要求、試驗方法、應用及維修

Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance;English version of DIN EN 14637:2008-01

DIN EN 14637-2008 發布歷史

This part of EN 14511 specifies minimum requirements which ensure that air conditioners, heat pumps and liquid chilling packages with electrical driven compressors are fit for the use designated by the manufacturer when used for space heating and/or cooling. This European Standard applies to factory-made units that can be ducted. This standard applies to factory-made liquid chilling packages with integral condensers or for use with remote condensers. This standard applies to factory-made units of either fixed capacity or variable capacity by any means. Packaged units, single split and multisplit systems are covered by this standard. Single duct and double duct units are covered by the standard. In the case of units consisting of several parts, the standard applies only to those designed and supplied as a complete package, except for liquid chilling packages with remote condenser. O This standard is primarily intended for water and brine chilling packages but can be used for cooling any other liquid subject to agreement. This standard applies to air-to-air air conditioners which evaporate the condensate on the condenser side. The units having their condenser cooled by air and by the evaporation of external additional water are not covered by this standard. This standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant. Installations used for heating and/or cooling of industrial processes are not within the scope of this standard. NOTE Part load testing of units is dealt with in CEN/TS 14825.

DIN EN 14637-2008由德國標準化學會 DE-DIN 發布于 2008-01。

DIN EN 14637-2008 在中國標準分類中歸屬于: Y71 建筑五金，在國際標準分類中歸屬于: 91.060.50 門窗,91.190 建筑附件。

DIN EN 14637-2008 發布之時，引用了標準

• EN 54-1-1996 火災探測和火災警報系統.第1部分:介紹;代替EN 54-1-1976
• EN 54-2-1997 火災檢測和報警系統.第2部分:控制和指示設備.包含修改件A1-10/2006
• EN 54-4-1997 火災檢測和報警系統.第4部分:供電設備.包括修改件A1-2002年12月和A2-2006年8月
• EN 54-5/A1-2002 火災探測和火災報警系統.第5部分: 熱探測器;著火位置探測器;修正A1
• EN 54-5-2000 火災探測和火災警報系統.第5部分:熱探測器.點探測器*， 2022-07-18 更新
• EN 54-7-2000 火災探測和火災警報系統.第7部分:煙霧探測器.使用散射光,透射光或電離的點探測器.包含修改件A1-2002和修改件 A2-2006;代替EN 54-9-1982*， 2022-07-18 更新
• CEN/TS 54-14-2004 火災探測和火警系統.第14部分:計劃,設計,安裝,交付使用,使用和維護指南
• EN 1155-1997 建筑五金.旋轉門用電控器的試驗方法和要求.修改件-2002年12月
• EN 1191 窗戶和門.重復開閉阻力.試驗方法*， 2022-07-18 更新
• EN 1670-1998 
• EN 12605 工業,商業和汽車庫大門和活動門.機械狀況的試驗方法
• EN 12798 運輸質量管理系統.公路、鐵路和內陸導航運輸.與安全相關的危險品運輸用補充件EN ISO 9001的質量管理系統要求
• EN 60068-1 *， 2014-03-01 更新

* 在 DIN EN 14637-2008 發布之后有更新，請注意新發布標準的變化。

DIN EN 14637-2008的歷代版本如下：

• 2008年01月 DIN EN 14637-2008 建筑五金件.防火/防煙門組件用電氣控制開放系統.要求、試驗方法、應用及維修

DIN EN 14637-2008 建筑五金件.防火/防煙門組件用電氣控制開放系統.要求、試驗方法、應用及維修 由 DIN V 18269-2006 變更而來。

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 DIN EN 14637-2008 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

DIN EN 14637-2008

發布日期

2008年01月

實施日期

廢止日期

無

中國標準分類號

Y71

國際標準分類號

91.060.50;91.190

發布單位

DE-DIN

引用標準

EN 54-1-1996 EN 54-2-1997 EN 54-2/AC-1999 EN 54-4-1997 EN 54-4/AC-1999 EN 54-4/A1-2002 EN 54-5/A1-2002 EN 54-5-2000 EN 54-7/A1-2002 EN 54-7-2000 CEN/TS 54-14-2004 EN 1155-1997 EN 1155/A1-2002 EN 1191 EN 1670-1998 EN 12605 prEN 20650-1 EN 12798 EN 60068-1

被代替標準

DIN V 18269-2006

適用范圍

This part of EN 14511 specifies minimum requirements which ensure that air conditioners, heat pumps and liquid chilling packages with electrical driven compressors are fit for the use designated by the manufacturer when used for space heating and/or cooling. This European Standard applies to factory-made units that can be ducted. This standard applies to factory-made liquid chilling packages with integral condensers or for use with remote condensers. This standard applies to factory-made units of either fixed capacity or variable capacity by any means. Packaged units, single split and multisplit systems are covered by this standard. Single duct and double duct units are covered by the standard. In the case of units consisting of several parts, the standard applies only to those designed and supplied as a complete package, except for liquid chilling packages with remote condenser. O This standard is primarily intended for water and brine chilling packages but can be used for cooling any other liquid subject to agreement. This standard applies to air-to-air air conditioners which evaporate the condensate on the condenser side. The units having their condenser cooled by air and by the evaporation of external additional water are not covered by this standard. This standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant. Installations used for heating and/or cooling of industrial processes are not within the scope of this standard. NOTE Part load testing of units is dealt with in CEN/TS 14825.

誰引用了DIN EN 14637-2008 更多引用