DIN EN 13016-1-2007
液化石油產品.蒸氣壓力.第1部分:氣體飽和蒸氣壓(ASVP)的測定和計算的干蒸氣壓當量值(DVPE)

Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); English version of DIN EN 13016-1:2007-11

DIN EN 13016-1-2007 發布歷史

This European Standard specifies a method for the determination of the total pressure, exerted in vacuo, by volatile, Iow viscosity petroleum products, components, and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 ℃. For referee testing the requirement to employ 1 I sample containers is mandatory. However, due to sample container size restrictions in taking automatic samples from vapour-locks either onboard a ship or from some land based storage tanks, the precision for 250 ml containers forms part of this standard and shall be used for referee purposes. NOTE 1 This standard states precision for both I I and 250 ml sample containers. Annex A I~rovides information on the precision values when using 50 ml at 37,8 ℃ or using 1 I samples at a test temperature of 50,0 ℃. The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample. This method described is suitable for testing air-saturated samples that exert an air-saturated vapour pressure of between 9,0 kPa and 150,0 kPa at 37,8 ℃. This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant EC Directive 85/536/EEC [4]. NOTE 2 For the purposes of this European Standard, the term "% (m/m)"and "% (VA/)" are used to represent the mass, respectively the volume fraction.

DIN EN 13016-1-2007由德國標準化學會 DE-DIN 發布于 2007-11。

DIN EN 13016-1-2007 在中國標準分類中歸屬于: E31 燃料油，在國際標準分類中歸屬于: 75.160.20 液體燃料。

DIN EN 13016-1-2007 發布之時，引用了標準

• EN ISO 3170 石油液體.手工取樣ISO 3170-2004;［使用:IP 475/2005］
• ISO 3007 石油產品和原油 蒸氣壓的測定 雷德法

DIN EN 13016-1-2007的歷代版本如下：

• 2007年11月 DIN EN 13016-1-2007 液化石油產品.蒸氣壓力.第1部分:氣體飽和蒸氣壓(ASVP)的測定和計算的干蒸氣壓當量值(DVPE)
• 2018年06月 DIN EN 13016-1-2018 液化石油產品.蒸氣壓力.第1部分:氣體飽和蒸氣壓(ASVP)的測定和計算的干蒸氣壓當量值(DVPE); 德文版本EN 13016-1-2018

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 DIN EN 13016-1-2007 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

DIN EN 13016-1-2007

發布日期

2007年11月

實施日期

廢止日期

無

中國標準分類號

E31

國際標準分類號

75.160.20

發布單位

DE-DIN

引用標準

EN ISO 3170 ISO 3007

代替標準

DIN EN 13016-1-2018

被代替標準

DIN EN 13016-1-2000 DIN EN 13016-1-2006

適用范圍

This European Standard specifies a method for the determination of the total pressure, exerted in vacuo, by volatile, Iow viscosity petroleum products, components, and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 ℃. For referee testing the requirement to employ 1 I sample containers is mandatory. However, due to sample container size restrictions in taking automatic samples from vapour-locks either onboard a ship or from some land based storage tanks, the precision for 250 ml containers forms part of this standard and shall be used for referee purposes. NOTE 1 This standard states precision for both I I and 250 ml sample containers. Annex A I~rovides information on the precision values when using 50 ml at 37,8 ℃ or using 1 I samples at a test temperature of 50,0 ℃. The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample. This method described is suitable for testing air-saturated samples that exert an air-saturated vapour pressure of between 9,0 kPa and 150,0 kPa at 37,8 ℃. This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant EC Directive 85/536/EEC [4]. NOTE 2 For the purposes of this European Standard, the term "% (m/m)"and "% (VA/)" are used to represent the mass, respectively the volume fraction.

DIN EN 13016-1-2007系列標準

誰引用了DIN EN 13016-1-2007 更多引用