CGA C-6.1-2006
高壓鋁制壓縮氣瓶的外觀檢查標準.第5版

STANDARES FOR VISUAL INSPECTION OF HIGH PRESSURE ALUMINUM COMPRESSED GAS CYLINDERS FIFTH EDITION

CGA C-6.1-2006 發布歷史

This publication has been prepared as a guide for the visual inspection of aluminum compressed gas cylinders with service pressures of 1800 psig (12 410 kPa) or greater. It is general in nature and does not cover all circumstances for each individual bylinder type or lading. Additional publications prepared by the Compressed Gas Association, Inc.(CGA), that might be helpful include: - CGA C-1, Methods for Hydrostatic Testing of Compressed Gas Cylinders[1]; - CGA C-6, Standards for Visual Inspection of Steel Compressed Gas Cylinders[6]; - CGA C-6.2, Guidelines for Viual Inspection and Requalification of Composite High Pressure Cylinders[7];and - CGA C-6.3, Guidelines for Viual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders[8]. Since there has been little or no experience with aluminum cylinders in the pressure range from 900 psig to 1800 psig (6200kPa to 12 410 kPa), this publication is derected at cylinders with a service pressure of 1800 psig (12 410 kPa) or greater. CGA C-6.3 is available for cylinders with lower service pressure[8]. Note- It is recommended that existing exemption markings remain intact. Figure 1-Exemption marked cylinder Figure 2-3AL marked exemption cylinder

CGA C-6.1-2006由美國壓縮氣體協會 US-CGA 發布于 2006。

CGA C-6.1-2006 在中國標準分類中歸屬于: J74 壓力容器。

CGA C-6.1-2006 發布之時，引用了標準

• CGA C-1 *， 2022-07-18 更新
• CGA C-6 *， 2022-07-18 更新
• CGA C-6.2 
• CGA C-6.3 *， 2022-07-18 更新

* 在 CGA C-6.1-2006 發布之后有更新，請注意新發布標準的變化。

CGA C-6.1-2006的歷代版本如下：

• 2006年 CGA C-6.1-2006 高壓鋁制壓縮氣瓶的外觀檢查標準.第5版
•  CGA C-6.1-2013

標準號

CGA C-6.1-2006

發布日期

2006年

實施日期

廢止日期

無

中國標準分類號

J74

發布單位

US-CGA

引用標準

CGA C-1 Code of Federal Regulations, Title 49 CFR Parts 170-180(Transportation), U.S.Department of Transprotation. Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402 CGA P-11 CGA C-6 CGA C-6.2 CGA C-6.3 CGA P-38 CGA TB-19 C

被代替標準

CGA C-6.1-2002

適用范圍

This publication has been prepared as a guide for the visual inspection of aluminum compressed gas cylinders with service pressures of 1800 psig (12 410 kPa) or greater. It is general in nature and does not cover all circumstances for each individual bylinder type or lading. Additional publications prepared by the Compressed Gas Association, Inc.(CGA), that might be helpful include: - CGA C-1, Methods for Hydrostatic Testing of Compressed Gas Cylinders[1]; - CGA C-6, Standards for Visual Inspection of Steel Compressed Gas Cylinders[6]; - CGA C-6.2, Guidelines for Viual Inspection and Requalification of Composite High Pressure Cylinders[7];and - CGA C-6.3, Guidelines for Viual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders[8]. Since there has been little or no experience with aluminum cylinders in the pressure range from 900 psig to 1800 psig (6200kPa to 12 410 kPa), this publication is derected at cylinders with a service pressure of 1800 psig (12 410 kPa) or greater. CGA C-6.3 is available for cylinders with lower service pressure[8]. Note- It is recommended that existing exemption markings remain intact. Figure 1-Exemption marked cylinder Figure 2-3AL marked exemption cylinder

CGA C-6.1-2006 中可能用到的儀器設備

誰引用了CGA C-6.1-2006 更多引用