IEC 62385-2007
核電站.儀器和控制對安全的重要性.安全系統測量途徑的性能評估用方法

Nuclear power plants - Instrumentation and control important to safety - Methods for assessing the performance of safety system instrument channels

IEC 62385-2007 發布歷史

The purpose of this International Standard is to define the requirements for demonstrating acceptable performance of safety system instrument channels through response time testing, calibration verification, and other means. The same requirements may be adopted for demonstrating the acceptable performance of non-safety systems and other instrument channels. This Standard contains the main topics in its body and includes annexes to provide further information. The annexes are for information only and contain a selection of the available methods. The methods described in this Standard are used to check instrument calibration for accuracy and time response. It covers direct methods used to set calibration within required tolerances and indirect methods to indicate a need for a direct calibration. The use of the indirect methods allows for longer periods between the routine direct calibrations.

IEC 62385-2007由國際電工委員會 IX-IEC 發布于 2007-06。

IEC 62385-2007 在中國標準分類中歸屬于: F09 衛生、安全、勞動保護，在國際標準分類中歸屬于: 27.120.20 核電站、安全。

IEC 62385-2007的歷代版本如下：

• 2007年06月 IEC 62385-2007 核電站.儀器和控制對安全的重要性.安全系統測量途徑的性能評估用方法

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 IEC 62385-2007 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

IEC 62385-2007

發布日期

2007年06月

實施日期

廢止日期

無

中國標準分類號

F09

國際標準分類號

27.120.20

發布單位

IX-IEC

被代替標準

IEC 45A/653/FDIS-2007

適用范圍

The purpose of this International Standard is to define the requirements for demonstrating acceptable performance of safety system instrument channels through response time testing, calibration verification, and other means. The same requirements may be adopted for demonstrating the acceptable performance of non-safety systems and other instrument channels. This Standard contains the main topics in its body and includes annexes to provide further information. The annexes are for information only and contain a selection of the available methods. The methods described in this Standard are used to check instrument calibration for accuracy and time response. It covers direct methods used to set calibration within required tolerances and indirect methods to indicate a need for a direct calibration. The use of the indirect methods allows for longer periods between the routine direct calibrations.

誰引用了IEC 62385-2007 更多引用