• <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • BS EN 15553-2007
    石油產品和相關材料.烴類型的測定.熒光指示劑吸附法

    Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method


     

     

    非常抱歉,我們暫時無法提供預覽,您可以試試: 免費下載 BS EN 15553-2007 前三頁,或者稍后再訪問。

    如果您需要購買此標準的全文,請聯系:

    點擊下載后,生成下載文件時間比較長,請耐心等待......

     

    標準號
    BS EN 15553-2007
    發布日期
    2007年05月31日
    實施日期
    2007年05月31日
    廢止日期
    中國標準分類號
    E30
    國際標準分類號
    75.080
    發布單位
    GB-BSI
    引用標準
    EN ISO 3686 EN 1601 EN 13132 EN ISO 3170 EN ISO 3171 EN ISO 3696
    被代替標準
    BS 2000-156-2005
    適用范圍
    This European Standard specifies a fluorescent indicator adsorption method for the determination of hydrocarbon types over the concentration ranges from 5 % (V/V) to 99 % (V/V) aromatic hydrocarbons, 0,3 % (V/V) to 55 % (V/V) olefinic hydrocarbons, and 1 % (V/V) to 95 % (V/V) saturated hydrocarbons in petroleum fractions that distil below 315 oC. This method may be applicable to concentrations outside these ranges, but the precision has not been determined. When samples containing oxygenated blending components are analysed, the hydrocarbon type results can be reported on an oxygenate-free basis or, when the oxygenate content is known, the results can be corrected to a total-sample basis. This test method is for use with full boiling range products. Cooperative data have established that the precision statement does not apply to petroleum fractions with narrow boiling ranges near the 315 °C limit. Such samples are not eluted properly, and results are erratic. Samples containing dark-coloured components that interfere with reading the chromatographic bands cannot be analysed. NOTE 1 The oxygenated blending components methanol, ethanol, tert-butyl methyl ether (MTBE), methyl tert-pentyl ether (TAME) and tert-butyl ethyl ether (ETBE) do not interfere with the determination of hydrocarbon types at concentrations normally found in commercial blends. These oxygenated compounds are not detected since they elute with the alcohol desorbent. The effects of other oxygenated compounds should be individually verified. NOTE 2 For the purposes of this European Standard, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.




    Copyright ?2007-2022 ANTPEDIA, All Rights Reserved
    京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號



  • <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • 床戏视频