DIN EN 1870-1-2007
木工機械安全.圓盤鋸床.第1部分:圓盤鋸架(帶和不帶滑動臺)、方板鋸和建筑工地用鋸已作廢

Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws; German version EN 1870-1:2007

DIN EN 1870-1-2007 發布歷史

This document deals with the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit), dimensions saws and building site saws, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer. NOTE I For the definition of stationary and displaceable machine see 3.13 and 3.14. NOTE 2 Circular saw benches, and dimension saws are used for ripping, cross cutting, dimensioning and grooving. Building site saws are used for ripping, cross cutting and dimensioning. The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting. NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2000 togetherbn with EN 61029-2-1:2002; hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2003 together with EN 60745-2-5:2003. For the purpose of this document building site saws having a tiltable spindle are considered to be circular saw benches. This document is not applicable to circular saw benches (with and without sliding table), dimensions saws and building site saws which are manufactured before the date of its publication as EN. NOTE 4 Machines covered by this document are listed under A.1.1 of Annex IV of the Machinery Directive.

DIN EN 1870-1-2007由德國標準化學會 DE-DIN 發布于 2007-07，并于 2007-07-01 實施，于 2009-08 廢止。

DIN EN 1870-1-2007 在中國標準分類中歸屬于: J65 木工機床及機用工具，在國際標準分類中歸屬于: 79.120.10 木工機械。

DIN EN 1870-1-2007的歷代版本如下：

• 2007年07月 DIN EN 1870-1-2007 木工機械安全.圓盤鋸床.第1部分:圓盤鋸架(帶和不帶滑動臺)、方板鋸和建筑工地用鋸

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 DIN EN 1870-1-2007 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

DIN EN 1870-1-2007

發布日期

2007年07月

實施日期

2007年07月01日

廢止日期

2009-08

中國標準分類號

J65

國際標準分類號

79.120.10

發布單位

DE-DIN

代替標準

DIN EN 1870-1-2009

適用范圍

This document deals with the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit), dimensions saws and building site saws, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer. NOTE I For the definition of stationary and displaceable machine see 3.13 and 3.14. NOTE 2 Circular saw benches, and dimension saws are used for ripping, cross cutting, dimensioning and grooving. Building site saws are used for ripping, cross cutting and dimensioning. The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting. NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2000 togetherbn with EN 61029-2-1:2002; hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2003 together with EN 60745-2-5:2003. For the purpose of this document building site saws having a tiltable spindle are considered to be circular saw benches. This document is not applicable to circular saw benches (with and without sliding table), dimensions saws and building site saws which are manufactured before the date of its publication as EN. NOTE 4 Machines covered by this document are listed under A.1.1 of Annex IV of the Machinery Directive.

DIN EN 1870-1-2007系列標準