DIN EN 14438-2007
多個房間嵌入式燃氣加熱裝置

Gas-fired insets for heating more than one room; English version of DIN EN 14438:2007-03

DIN EN 14438-2007 發布歷史

This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of gas-fired insets for heating more than one room that are intended to be built into a casing made from brickwork or similar material. This European Standard is intended to be used in conjunction with EN 613:2000. This European Standard is applicable to type Buss insets burning gas: — that incorporate an atmospheric burner; — that are installed directly to an open flue or to a device to evacuate the products of combustion; — that have a nominal heat input not exceeding 20 kW (based on the net calorific value). In addition, this European Standard is also applicable to insets for heating more than one room which have a live fuel effect. * This European Standard is not applicable to: — open fronted appliances as specified in EN 13278; — decorative fuel effect appliances as specified in EN 509; — convection heating appliances as specified in EN 613; — catalytic combustion appliances; — appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266; — warm air heaters (which are subject of CEN/TC 180). This European Standard is only applicable to insets which are intended to be type tested.

DIN EN 14438-2007由德國標準化學會 DE-DIN 發布于 2007-03。

DIN EN 14438-2007 在中國標準分類中歸屬于: Q83 供熱器材設備，在國際標準分類中歸屬于: 97.100.20 氣體加熱器。

DIN EN 14438-2007 發布之時，引用了標準

• EN 125 燃氣器具用火焰控制器.熱電點火監控設備*， 2010-05-01 更新
• EN 298 帶或不帶鼓風的氣體燃燒器和燃氣具用自動氣體燃燒器控制裝置*， 2012-05-01 更新
• EN 613-2000 獨立式燃氣對流加熱器.包含修改件A1-2003;代替HD 1002-1994*， 2022-07-18 更新
• EN 60529-1991 隔離罩(IP規范)提供的保護等級規范(IEC 529-89)
• EN 50165 

* 在 DIN EN 14438-2007 發布之后有更新，請注意新發布標準的變化。

DIN EN 14438-2007的歷代版本如下：

• 2007年03月 DIN EN 14438-2007 多個房間嵌入式燃氣加熱裝置

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 DIN EN 14438-2007 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

DIN EN 14438-2007

發布日期

2007年03月

實施日期

廢止日期

無

中國標準分類號

Q83

國際標準分類號

97.100.20

發布單位

DE-DIN

引用標準

EN 125 EN 298 EN 613-2000 EN 60529-1991 EN 50165

被代替標準

DIN EN 14438-2002

適用范圍

This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of gas-fired insets for heating more than one room that are intended to be built into a casing made from brickwork or similar material. This European Standard is intended to be used in conjunction with EN 613:2000. This European Standard is applicable to type Buss insets burning gas: — that incorporate an atmospheric burner; — that are installed directly to an open flue or to a device to evacuate the products of combustion; — that have a nominal heat input not exceeding 20 kW (based on the net calorific value). In addition, this European Standard is also applicable to insets for heating more than one room which have a live fuel effect. * This European Standard is not applicable to: — open fronted appliances as specified in EN 13278; — decorative fuel effect appliances as specified in EN 509; — convection heating appliances as specified in EN 613; — catalytic combustion appliances; — appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266; — warm air heaters (which are subject of CEN/TC 180). This European Standard is only applicable to insets which are intended to be type tested.