IEC 61169-16-2006
射頻連接器.第16部分:節規范.外導體內徑為7mm(0.276in)的螺紋連接射頻同軸連接器.N型:特征阻抗50Ω和75Ω
Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristics impedance 50 (75 ) (type N)
IEC 61169-16-2006 發布歷史
This part of IEC 61169, which is a Sectional Specification (SS), provides information and rules for the preparation of Detail Specifications (DS) for pin and socket R.F. coaxial connectors, with screw coupling mechanism, for low to medium power applications. The connector is commonly known as the "type N". Three versions of the 50 Ω characteristic impedance type N connector are included, each version being mateable with each of the others. The general purpose connector (grade 2) derived from the specifications MIL-C17B and MILC- 39012 may preferably be used with R.F. cable 60096 IEC 50-7 up to about 12 GHz maximum frequency. The high performance connector (grade 1) is particularly suitable for microwave applications when lower reflection factors than are offered by the general purpose connector are required. The connectors may also be suitable for microwave components. The tolerances of the interface dimensions lie between those for grade 0 and grade 2, and are chosen to give the performance required. Some grade 1 connectors conforming to this specification may be used up to 18 GHz maximum frequency. The standard test connector (grade 0) has a closely controlled interface to provide a reference for the measurement of connectors, cable assemblies, components and equipment with the above two interfaces. It may also be used as a microwave connector in situations when the most precise interface for use up to 18 GHz maximum frequency is required. A 75 Ω characteristic impedance connector is given in Annex A even though the use of 75 Ω type N connectors is strongly deprecated. Accidental cross-coupling of 75 Ω with 50 Ω connectors can destructively damage the 75 Ω version, but in view of the extensive use of a number of marginally different 75 Ω versions, the interface now given provides common design guidance. 75 Ω connectors should be clearly identified. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements.
IEC 61169-16-2006由國際電工委員會 IX-IEC 發布于 2006-12。
IEC 61169-16-2006 在中國標準分類中歸屬于: L23 連接器，在國際標準分類中歸屬于: 33.120.30 射頻連接器。
IEC 61169-16-2006的歷代版本如下：
- 2006年12月 IEC 61169-16-2006 射頻連接器.第16部分:節規范.外導體內徑為7mm(0.276in)的螺紋連接射頻同軸連接器.N型:特征阻抗50Ω和75Ω
- 標準號
- IEC 61169-16-2006
- 發布日期
- 2006年12月
- 實施日期
- 廢止日期
- 無
- 中國標準分類號
- L23
- 國際標準分類號
- 33.120.30
- 發布單位
- 國際電工委員會
- 被代替標準
- IEC 46F/54/FDIS-2006
- 適用范圍
- This part of IEC 61169, which is a Sectional Specification (SS), provides information and rules for the preparation of Detail Specifications (DS) for pin and socket R.F. coaxial connectors, with screw coupling mechanism, for low to medium power applications. The connector is commonly known as the "type N". Three versions of the 50 Ω characteristic impedance type N connector are included, each version being mateable with each of the others. The general purpose connector (grade 2) derived from the specifications MIL-C17B and MILC- 39012 may preferably be used with R.F. cable 60096 IEC 50-7 up to about 12 GHz maximum frequency. The high performance connector (grade 1) is particularly suitable for microwave applications when lower reflection factors than are offered by the general purpose connector are required. The connectors may also be suitable for microwave components. The tolerances of the interface dimensions lie between those for grade 0 and grade 2, and are chosen to give the performance required. Some grade 1 connectors conforming to this specification may be used up to 18 GHz maximum frequency. The standard test connector (grade 0) has a closely controlled interface to provide a reference for the measurement of connectors, cable assemblies, components and equipment with the above two interfaces. It may also be used as a microwave connector in situations when the most precise interface for use up to 18 GHz maximum frequency is required. A 75 Ω characteristic impedance connector is given in Annex A even though the use of 75 Ω type N connectors is strongly deprecated. Accidental cross-coupling of 75 Ω with 50 Ω connectors can destructively damage the 75 Ω version, but in view of the extensive use of a number of marginally different 75 Ω versions, the interface now given provides common design guidance. 75 Ω connectors should be clearly identified. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements.