IEC 61755-3-6-2006
纖維光學連接器光接口.第3-6部分:光接口.以銅鎳合金作為纖維環繞材料、單模纖維的直徑2.5mm和1.25mm圓柱形8度角PC復合材料套管

Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre

IEC 61755-3-6-2006 發布歷史

This part of IEC 61755 defines dimensional limits and material properties of a 2,5 mm and a 1,25 mm diameter cylindrical composite ferrule optical interface to meet specific requirements for APC fibre-to-fibre interconnection. The composite ferrule uses different materials in the end face contact zone and in the ferrule to sleeve contact zone. The specified materials for each zone are Zirconia (ZrO2) for the ferrule to sleeve contact zone and Cu-Ni-alloy for the end face contact zone. Ferrules made from the material specified in this document are suitable for use in categories C, U and O as defined in IEC 61753-1. NOTE If mated within the same family (cylindrical APC ferrule), the ferrules specified in this document are intended to have the same optical attenuation performance grade for connections with all ferrules described in IEC 61755-3 documents.

IEC 61755-3-6-2006由國際電工委員會 IX-IEC 發布于 2006-11。

IEC 61755-3-6-2006 在中國標準分類中歸屬于: M33 光通信設備，在國際標準分類中歸屬于: 33.180.20 纖維光學和光學互連器件。

IEC 61755-3-6-2006的歷代版本如下：

• 2006年11月 IEC 61755-3-6-2006 纖維光學連接器光接口.第3-6部分:光接口.以銅鎳合金作為纖維環繞材料、單模纖維的直徑2.5mm和1.25mm圓柱形8度角PC復合材料套管
• 2012年02月23日 IEC 61755-3-6-2006/AMD1-2012 修改件1.光纖連接器光學接口.第3-6部分:光學接口.使用Cu-Ni合金作為光纖周圍材料的單模光纖的直徑為2.5mm和1.25mm的圓柱形8度角PC復合套管

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 IEC 61755-3-6-2006 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

IEC 61755-3-6-2006

發布日期

2006年11月

實施日期

廢止日期

無

中國標準分類號

M33

國際標準分類號

33.180.20

發布單位

IX-IEC

被代替標準

IEC 86B/2260/CDV-2005

適用范圍

This part of IEC 61755 defines dimensional limits and material properties of a 2,5 mm and a 1,25 mm diameter cylindrical composite ferrule optical interface to meet specific requirements for APC fibre-to-fibre interconnection. The composite ferrule uses different materials in the end face contact zone and in the ferrule to sleeve contact zone. The specified materials for each zone are Zirconia (ZrO2) for the ferrule to sleeve contact zone and Cu-Ni-alloy for the end face contact zone. Ferrules made from the material specified in this document are suitable for use in categories C, U and O as defined in IEC 61753-1. NOTE If mated within the same family (cylindrical APC ferrule), the ferrules specified in this document are intended to have the same optical attenuation performance grade for connections with all ferrules described in IEC 61755-3 documents.

IEC 61755-3-6-2006系列標準

誰引用了IEC 61755-3-6-2006 更多引用