ANSI/ASTM A804/A 804M:1999
在電源頻率下用薄鋼板試樣測試材料交流磁特性的方法

在電源頻率下用薄鋼板試樣測試材料交流磁特性的方法 是非強制性國家標準，您可以免費下載預覽頁

非常抱歉，我們暫時無法提供預覽，您可以試試：免費下載 ANSI/ASTM A804/A 804M:1999 前三頁，或者稍后再訪問。

您也可以嘗試購買此標準，
點擊右側 “購買” 按鈕開始采購（由第三方提供）。

注意：點擊下載后，生成下載文件時間比較長，請耐心等待......

適用范圍: These test methods cover the determination of specific core loss and peak permeability of single layers of sheet-type specimens tested with normal excitation at a frequency of 50 or 60 Hz. Note 1-These test methods have been applied only at the commercial power frequencies, 50 and 60 Hz, but with proper instrumentation and application of the principles of testing and calibration embodied in the test methods, they are believed to be adaptable to testing at frequencies ranging from 25 to 400 Hz. These test methods employ calibration procedures that provide correlation with the 25-cm [250-mm] Epstein test.The range of test inductions is governed by the properties of the test specimen and by the available instruments and other equipment components. Normally, nonoriented electrical steels can be tested over a range from 8 to 16 kG [0.8 to 1.6 T] for core loss. For oriented electrical steels, the normal range extends to 18 kG [1.8 T]. Maximum inductions in peak permeability testing are limited principally by heating of the magnetizing winding and tests are limited normally to a maximum a-c magnetizing force of about 150 Oe [12 000 A/m]. These test methods cover two alternative procedures as follows: Test Method 1-Sections 6 to 12 Test Method 2-Sections 13 to 19

ANSI/ASTM A804/A 804M:1999在電源頻率下用薄鋼板試樣測試材料交流磁特性的方法