IEC 61347-2-1-2000
燈的控制裝置 第2-1部分:起動裝置(輝光起動器除外)的特殊要求

Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)

IEC 61347-2-1-2000 發布歷史

This part of IEC 61347 specifies particular safety requirements for starting devices (starters other than glow starters and ignitors) for fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination with lamps and ballasts covered in IEC 60081, IEC 60188, IEC 60192, IEC 60662, IEC 60901, IEC 61167, IEC 61195, IEC 61199, IEC 61347-2-8 and IEC 61347-2-9. It does not apply to glow starters or starting devices which are incorporated in discharge lamps or which are manually operated. Preheat transformers for fluorescent lamps are covered by IEC 61347-2-8. NOTE Glow starters are dealt with in IEC 60155. This standard refers only to starting devices for use with ballasts and lamps which are internationally the most in demand. Performance requirements are given in IEC 60927.

IEC 61347-2-1-2000由國際電工委員會 IX-IEC 發布于 2000-10。

IEC 61347-2-1-2000 在中國標準分類中歸屬于: K72 一般燈具，在國際標準分類中歸屬于: 29.140.99 有關燈的其他標準。

IEC 61347-2-1-2000的歷代版本如下：

• 2000年10月 IEC 61347-2-1-2000 燈的控制裝置 第2-1部分:起動裝置(輝光起動器除外)的特殊要求
• 2005年11月23日 IEC 61347-2-1-2000/AMD1-2005 修改件1.燈具控制裝置.第2-1部分:起動裝置（輝光起動器除外）的特殊要求
• 2013年09月25日 IEC 61347-2-1-2000/AMD2-2013 修改件2.燈具控制裝置.第2-1部分:起動裝置（輝光起動器除外）的特殊要求

IEC 61347-2-1-2000 燈的控制裝置 第2-1部分:起動裝置(輝光起動器除外)的特殊要求 由 IEC 60926 Edition 2.1-2000 變更而來。

非常抱歉，我們暫時無法提供預覽，您可以試試： 免費下載 IEC 61347-2-1-2000 前三頁，或者稍后再訪問。

注意： 點擊下載后，生成下載文件時間比較長，請耐心等待......

標準號

IEC 61347-2-1-2000

發布日期

2000年10月

實施日期

廢止日期

無

中國標準分類號

K72

國際標準分類號

29.140.99

發布單位

IX-IEC

被代替標準

IEC 34C/498/FDIS-2000 IEC 60926-1995 IEC 60926 AMD 1-1999 IEC 60926 Edition 2.1-2000

適用范圍

This part of IEC 61347 specifies particular safety requirements for starting devices (starters other than glow starters and ignitors) for fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination with lamps and ballasts covered in IEC 60081, IEC 60188, IEC 60192, IEC 60662, IEC 60901, IEC 61167, IEC 61195, IEC 61199, IEC 61347-2-8 and IEC 61347-2-9. It does not apply to glow starters or starting devices which are incorporated in discharge lamps or which are manually operated. Preheat transformers for fluorescent lamps are covered by IEC 61347-2-8. NOTE Glow starters are dealt with in IEC 60155. This standard refers only to starting devices for use with ballasts and lamps which are internationally the most in demand. Performance requirements are given in IEC 60927.

IEC 61347-2-1-2000系列標準

誰引用了IEC 61347-2-1-2000 更多引用