• <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • IEC 61874:1998
    核儀器 測定巖石密度的地球物理鉆孔裝置(“密度測井”)

    Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ("density logging")


    IEC 61874:1998 發布歷史

    IEC 61874:1998由國際電工委員會 IX-IEC 發布于 1998-10,并于 1998-11-24 實施。

    IEC 61874:1998 在中國標準分類中歸屬于: F65 核電廠核島,在國際標準分類中歸屬于: 17.060 體積、質量、密度和粘度的測量。

    本標準有等同采用的 中文版 GB/T 41485-2022 核儀器儀表 地球物理密度測井儀

    IEC 61874:1998的歷代版本如下:

    • 1998年 IEC 61874:1998 核儀器 測定巖石密度的地球物理鉆孔裝置(“密度測井”)

     

    This International Standard applies to equipment consisting of - borehole logging probe equipped with a collimated radioisotope (gamma) source (during the actual measurements only) and a detector unit to measure scattered gamma radiation; - coaxial cable with winch and depth control; - other instruments and devices (power supply, pulse converter/amplifier, ratemeter, recorder, signal processing and readout units). This standard defines the terminology, specifies the types of apparatus, design and general technical requirements, specific radiation performance, electrical, mechanical and environ-mental performance requirements. It also defines test and calibration procedures and covers electrical safety and radiation protection issues. Further, it gives recommendations about items that should be included in the manufacturer's operation and maintenance documentation (or certificate). The purpose of this standard is to specify design requirements and performance characteristics of nuclear instrumentation used in boreholes to determine bulk rock density in situ. With suitable response charts the measurements can be equated to rock lithology and porosity.

    IEC 61874:1998

    標準號
    IEC 61874:1998
    發布
    1998年
    中文版
    GB/T 41485-2022 (等同采用的中文版本)
    發布單位
    國際電工委員會
    當前最新
    IEC 61874:1998
     
     
    被代替標準
    IEC 45/442/FDIS:1998

    IEC 61874:1998相似標準


    推薦

    30種測井方式,你知道幾種?

    快,點擊藍字關注我們,一起漲姿勢~測井概念測井,也叫地球物理測井或礦場地球物理,簡稱測井,是利用巖層電化學特性、導電特性、聲學特性、放射性等地球物理特性,測量地球物理參數方法,屬于應用地球物理方法(包括重、磁、電、震、)之一。簡而言之,測井就是測量地層巖石物理參數。測井原理任何物質組成基本單位是分子或原子,原子又包括原子和電子。巖石可以導電。...

    最具挑戰可再生能源地點我們都能測

    地層密度密度屏蔽測井&鐵礦石密度探頭地層密度探測器使用雙屏蔽探測器提供井眼補償密度測量,并具有良好地層邊界分辨率。屏蔽密度探頭提供額外LL3聚焦電測井,具有良好垂直分辨率和探測深度。鐵礦石密度探測器包括額外標定器,不同源距探測機器和高活動放射源,將鐵礦石測井密度范圍擴展到5g/cc。三臂井徑儀探頭三臂井徑儀探頭利用三個連接機械井臂與井壁接觸,測定并記錄單個鉆孔井徑連續變化。...

    城市地下空間探測地球物理方法研究

    表1 雄安新區第四系巖石物性參數統計表圖2 基于雄安新區工程孔測井資料建立第四系物性參數綜合柱狀圖數據分析表明,不同巖性測井響應特征差異明顯。從黏土到粗砂,巖石粒度逐漸變粗,視電阻率逐漸升高,自然伽馬逐漸降低,聲波速度、密度、磁化率、極化率整體升高。同時,聲波速度和密度又受埋深影響;磁化率受砂類巖石中磁性礦物含量影響;極化率受砂類巖石中含水飽和度影響。...

    RG綜合數字測井儀(設備)

    【新朋友】點擊標題下面藍色字“廣州歐美大地儀器”加關注【老朋友】點擊右上角,轉發或分享本頁面內容型 號: RG原產地: 英國RG公司用 途: 確定井剖面的巖石性質,評價油(氣)水層,查明煤、金屬與非金屬、金屬等礦床,并確定其埋藏深度和有效厚度;測量計算儲量所需各種地質參數,如巖性成分、孔隙度、滲透度、飽和度、煤成分,含碳量,金屬與非金屬礦品味,含水層水質、水量等;確定地層傾角,巖層走向和方位以及鉆孔傾角和方位角...


    IEC 61874:1998 中可能用到的儀器設備





    Copyright ?2007-2022 ANTPEDIA, All Rights Reserved
    京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號

  • <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • 床戏视频