• <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • EN ISO 9712:2022
    無損檢測.無損檢測(NDT)人員的資格鑒定與認證

    Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2021)

    2022-09

     

     

    非常抱歉,我們暫時無法提供預覽,您可以試試: 免費下載 EN ISO 9712:2022 前三頁,或者稍后再訪問。

    您也可以嘗試購買此標準,
    點擊右側 “立即購買” 按鈕開始采購(由第三方提供)。

     

    標準號
    EN ISO 9712:2022
    發布
    2022年
    發布單位
    歐洲標準化委員會
    當前最新
    EN ISO 9712:2022
     
     
    適用范圍
    This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods. a) acoustic emission testing; b) eddy current testing; c) leak testing (hydraulic pressure tests excluded); d) magnetic testing; e) penetrant testing; f) radiographic testing; g) strain gauge testing; h) thermographic testing; i) ultrasonic testing; j) visual testing (direct unaided visual tests and visual tests carried out during the application of another NDT method are excluded). The system specified in this document is also applicable to other NDT methods or to NDT techniques within an established NDT method, provided a comprehensive scheme of certification exists and the NDT method or NDT technique is covered by international, regional or national standards or the NDT method or the NDT technique has been demonstrated to be effective to the satisfaction of the certification body. NOTE 1 The term "industrial" implies the exclusion of applications in the field of medicine. NOTE 2 CEN/TR 14748 provides guidance on the methodology for qualification of non-destructive tests. NOTE 3 This document specifies requirements for what are, in effect, third party conformity assessment schemes. These requirements do not directly apply to conformity assessment by second or first parties, but relevant parts of this document can be referred to in such arrangements. NOTE 4 The term “direct unaided visual testing” implies where there is an uninterrupted optical path from the observer’s eye to the test area and the observer uses no tools or devices (e.g. mirror, endoscope, fibre optic). NOTE 5 Calculations of strain based on other NDT methods are excluded.

    EN ISO 9712:2022相似標準


    推薦

    一文讀懂無損檢測NDT)(四)

    這幾家無損檢測資格認證機構分別制定了各自無損檢測人員考核規則,學員需要根據所從事行業取得相應資格認證,才可以從事該領域無損檢測工作。通過國內相關學會獲得NDT對應資質國內主要是這幾種機構組織無損檢測培訓考核,分別是:中國特種設備檢驗協會、核工業無損檢測中心、中國機械工程學會、鐵道部、中國船級社等等。他們針對自己行業,有深入培訓考核機制,相互認可性較低。...

    磁性覆層測厚儀技術標準和檢定規程

    1992年發布了由ISO/TC135/SC7制定標準ISO9712:1992“NDT人員資格鑒定認證”。   在這里,資格鑒定是指“對正確執行無損檢測任務所需知識、技能、培訓和實踐經歷所作驗證。”而認證則是指“對某人員能勝任某種無損檢測方法資格作出書面證明程序。”  ...

    一文讀懂無損檢測NDT)(五)

    EN473——歐洲各國無損檢測人員資質是按照EN473標準或根據EN473標準建立了一套適合自己國家無損檢驗人員資格鑒定認證體系。國際無損檢測培訓介紹國際無損檢測培訓考核已經發展了多年,辦學條件非常成熟,重視實操,而且所獲得資格是全球認可。除非遇到某些有特殊傾向客戶,要求一定要有某國或某行業特殊資質(國內學會之間互認度很低,造成行業壁壘)。...

    無損檢測培訓和認證

    NDT培訓通常分為三個級別,大致對應于學徒,熟練工和碩士級別的理解。在行業中,這些被稱為I級,II級和III級認證。  在最基本水平上,無損檢測技術人員應證明自己熟練掌握一種或多種有限評估類型,即焊縫中超聲裂紋檢測。他們應該能夠確定應用程序是否通過評估,并記錄結果。技術人員還應該能夠設置,校準,存儲和遵守一種或多種無損檢測設備安全措施。1級技術人員應在更高級別的技術人員監督下進行。  ...


    誰引用了EN ISO 9712:2022 更多引用





    Copyright ?2007-2022 ANTPEDIA, All Rights Reserved
    京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號

  • <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • 床戏视频