• <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • FSIQ3頻譜分析儀維修FSIQ3現貨二手FSIQ3

    上一篇 / 下一篇  2019-09-11 10:02:04

    FSIQ3頻譜分析儀維修FSIQ3現貨二手FSIQ3 羅德與施瓦茨FSIQ3 FSP3

    846176163426770448

    815871244847205071

    590517201118988547

    352418039530516607

    選用我公司二手儀器的優勢是:

    1、與新購儀器幾個月的供貨期相比,購買二手儀器的供貨期要短的多。

    2、在時間就是市場的今天,優勢無疑是為明顯的。

    2、二手儀器的價格便宜,基本為新購儀器價格的20%~50%。在電子技術迅 速發展的今天,儀器的更新也在加快,投資越少則風險越小。

    3、為了讓您放心地使用我們提供的二手儀器,我們銷售的二手儀器可以做到:保修半年到一年不等

          

          本公司現在新進了一批頻譜分析儀、網絡分析儀、信號分析儀、示波器、綜合測試儀、音頻分析儀、EMI接收機等射頻類儀器,對新老客戶在價格方面也在做優惠活動!歡迎選購!歡迎來電咨詢!期待顧客上門看貨!您的滿意是我們zui終的追求!

     深圳鴻翔儀器專業銷售,租賃,回收二手頻譜分析儀,信號源,網絡分析儀,示波器,無線電綜合測試儀,音頻分析儀,噪聲系數分析儀,WIFI測試儀,手機綜合測試儀,EMI測試儀,天饋線分析儀,功率計,頻率計,校準件,函數信號發生器,電源,GPIB卡,萬用表,衰減器等測試儀器

     

    特點
    ·頻率范圍:20Hz~3.5GHz 
    ·用于尖端ACPR測量的超寬動態范圍的頻譜分析 
    ·用于W-CDMA的75dB ACPR動態范圍 
    ·用于通道選擇的在4.096MHz合成帶寬下的82dB ACPR 
    ·高靈敏度濾波器 
    ·分辨貸款1Hz~10MHz,1/2/3/5步進 
    ·1Hz~1kHz RBW的快速測量的FFT濾波器 
    ·在10Hz帶寬時的顯示平均噪底為-150dBm

    技術指標

  • Aging per day 1.10-9
    Aging per year^1) 2.10-7
    Marker resolution 0.1Hzto 10kHz(dependent on span)
    Frequency counter resolution 0.1Hzto 10KHz(selectable)
    Displayrange for frequency axis 0Hz,10Hzto full span
    Display range with digital demodulationNumber of displayed 
    symbols
    Symbolrade≤1Mhz max.1600 symbols(4points per sym-bol)
    Symbol rate>1MHz to <3.2MHz 1/2x symbol rate/MHz*1000sym-bols in 
    steps of 100 symbols
    Symbolrate≥3.2MHz max.1600 symbols(4points per sym-bol)
    Display range with analog demodulation (3500/demodulationbandwith/Hz)s
    Sweep
    Display range 0Hz 1μs to2500s in 5% steps
    Display range≥10Hz 5msto 16000 s in steps≤10%
    Sampling rate 50ns(20Mhz A/D converter)
    Numberof pixels(x axis) 500
    Resolution bandwidths with spectrum display
    Anglog filter  
    3dB bandwidths 1Hz to 10MHzin 1/2/3/5 steps
    Shape factor60:3dB
    <1kHz <6
    1kHz...2MHz <12
    >2MHz <7
    Video bandwidths 1Hzto 10MHz in 1/2/3/5steps
    FFT filter  
    3dB bandwidths 1Hzto 1kHz in 1/2/3/5 steps
    Shape factor 60:3dB 2.5nominal
    Max.display range 100dB
    Inherent spurious response <-100dBm
    Level  
    Display range noise floordisplayed to 30dBm
    Maximum inputlevel RF attenuation 0dB
    DC voltage 0V
    CW RF power 20dBm(=0.3W)
    Pulse spectral density 97dBμV/MHz
    RF attenuation≥10dB
    DCvoltage 0V
    CWRF power 30dBm(=1W)
    Max.pulse voltage 150V
    Max.pulse energy(10μs) 1mWs;0.5mWs
    1dB compression of input mixer(0 dB RF attenuation)
    Intermodulation +10dBmnominal
    Second harmonic intercept
    point (SHI) >25dBm,typ.>35dBmat f<150Mhz
    >40dBm,typ.>45dBm at f>150MHz
    Leveldisplay
    Screen 500*400pixel(one diagram),max.
    2 diagrams with independent settings
    Loglevel axis 10 to 200dB,in steps of 10dB
    Linear level axis 10%of reference level per level divi-sion,
    10 divisions or logarithmic scal-ing
    Trace max.4(withtwo diagrams on screen,max.
    2 per diogram);quasi-analog display 
    of allresults
    Trace detector MaxPeak,Min Peak,Auto Peak(Normal),
    Sample,RMS,Average
    Tracefunctions Clear/Write,Max Hold,Min Hold,Average
    Setting range of reference level
    Logarithmiclevel display -130dBm to 30dBm,insteps of 0.1dB
    Linear level display 7.0nVto 7.07V in steps of 1%
    Unitesof level axis dBm,dBμV,dBmV,dBpW(loglevel display)V,A,W,dBμA(linear level display)
    Totalmeasurement (0 to -50dB,S/N>15dB,span/RBW<100)(95% 
    confidence level)
    <2.2GHz <1dB
    2.2Ghz to 3.5/7Ghz <1.5dB
    7Ghz to 18Ghz <2.5dB
    18Ghz to 26.5Ghz <3dB
    Measurement of digital modulation signals
    Modulation formats
    BPSK,QPSK,OffsetQPSK,DQPSK,л
    /4DQpsk,8psk,16QAM,MSK,GMSK,2FSK,2GFSK,4FSk,4GFSK
    Selectable Standards
    W-CDMA,Q-CDMA(IS-95)Forward/reverse,GSM,NADC,TETRA,PDC,PHS,
    CDPD
    Filters
    Filtering raisedcosine,square root raised cosine,Ganssian
    Settingrange α/B*T 0.2 to 3 in steps of 0.01
    Filters to specific standards
    FLEX Besse B*T=1.22 and 2.44
    ERMES BesselB*T=1.25
    CDMA(IS 95) forwardand reverse channel
    APCO 25FM  
    Symbol rate  
    Symbol rate 320Hzto 6.4Mhz
    (symbol rade*(1+α)<8MHz
    Samples/symbol  
    Symbol rate≤200kHz 1,2,4,8,16
    200kHz 1,2,4,8
    Symbol rate>400kHz 1,2,4
    Synchronization internalto symbol clock andfrequency/phase
    Levelmeasurements with digital demodulation
    Peak powerrange -60dBm to +30dBm
    Absolutelevel errorMean power(0dB to -10dB below reference level)
    f≤2.2GHz 1dB
    2.2GHz to 7Ghz 1.5dB
    7Ghz to 18Ghz 2.5dB(FSIQ7/26)
    18Ghz to 26.5GHz 3dB(FSIQ7/26)
    Dynamic range for burst measurement
    (meanpower ,ref.level≥10dBm,
    power=ref.level+1dB,
    low-noise mode,points/symbol<4,
    nominal values 



     


    W-CDMA 60dB
    GSM 74dB
    NADC 78dB
    TETRA 79dB
    Timereference(nominal)
    without clock synchronization
    MSK/GMSK modulation,
    PSK/QAM/FSK modulation
    with clock synchronization


    <1/(2*symbol rate.points/symbol)
    <1/(2*symbol rate)
    <0.001*1/(symbolrate)
    Residual error in modulationmeasurement
    (data valid for level from referencelevel to reference level
    -6dB,S/N>60dB,α/BT=0.3 to 0.7,number of demodulatedsymbols
    >100,averaging≥10,analog bandwidth>10*symbol rate,input frequency
    >15*symbol rate,local suppression at 0Hz input frequency adjusted),
    symbolrate(1+α)≤8MHz
    Frequency error ±(symbolrate*5*10^-6+0.1Hz+reference error*carrier frequency)
    I/Qoffset error 0.2%(-54dB)
    Errorwith modulation standard
    GSM900/1800/1900 phaseerror≤0.5°rms,
    typ.<1.5° peak
    NADC,CDPD EVM≤0.5°rms,typ.<1.5%peak
    TETRA,PDC,PHS EVM≤0.7°rms,typ.<2%peak
    PWT EVM≤1°rms,typ.<3%peak
    IS-95 CDMA, forward/reversechannel
    p factor≥0.9995
    W-CDMA EVM≤1.8%rms,typ.<5%peak
    Measurement of analog modulation signals
    Demodulationbandwidth
    Realtime demodulation 5khzto 200kHz in steps of 1,2,3,5
    Offlinedemodulation 5kHz to 5MHz insteps of 1,2,3,5
    Demodulation length
    (max.sweeptime)
    3500/(demod.bandwith/Hz)s
    Readout  
    Trace with AF signal,carrier power (Am DC-coupled),or modulationsumma-ry(table)with numerical display of :peak and rms values of modulation depthsor deviations of main demodulation;
    SINAD value 1kHz(only with realtime demodulation);AFfrequency;carrier power;peak values of incidental modulation
    Thefollowing specifications are valid for demodulation bandwidth≤2MHz,resolutionbandwidth≤2MHz,resolution bandwidth≥5*demodulation bandwidth,RF input level≤-10dBm,referencelevel setting=peak input level+0 to +6dB.
    Amplitudedemodulation
    Range upto 100%
    AF  
    Offline demodulation 0.001to 0.2*demod.BW
    Realtie demodulation 30Hzto 0.2*demod.BW,
    max.20kHz
    Frequencydemodulation
    Deviation range max.0.4*demod.BW
    AF  
    Offline demodulation DC/0.001to 0.2*demod.BW
    Realtime demodulation DC/30Hzto 0.2*demod.BW,
    max.20kHz
    Phase demodulation  
    Deviation range upto 10 rad
    AF  
    Offline demodulation DC/0.001to 0.1*demod.BW
    <(0.4*demod.BW)/(phase devia-tion/rad)
    Realtimedemodulation 200Hz to 0.1*demod.BW,max.
    15kHz<90.4*demod.BW)/(phasedeviation/rad),
    smaller limit values apply
    Measurementof unmodulated carrier power
    Measurement error,
    (ref,level to ref.level-30dB)

    1.5dB
    SINAD measurements
    Realtimedemodulation
    AF=1kHz±4*10^-4*demod.BW
    Error with 6 to 54 dB SINAD

     

    ±1dB
    +error due to demodulator SINAD
    Displayof AF frequencies
    Range
    Offline demodulation 0.001to 0.3*demod.BW
    Realtime demodulation 30Hzto 0.3*demod.BW,
    max.20kHz
    Resolution 1mHzto 1Hz
    Error(S/N≥40dB) 1.10^-6*demod.BW+errorof refer-ence frequency_1mHz±1 digit
    AF filters  
    Realtime demodulation
    Lowpass 3kHz,15kHz(Butterworth,12dB/oct.)
    Highpass 30Hz,300Hz(6dB/oct.))
    Weighting filters CCITT P.53,Cmessage
    Offline demodulation  
    Lowpass
     
    5%,10%,25% ofdemod.BW,(12dB/oct.)
    Audio demodulation
    Modulation modes AM and FM
    Audio output speakerand phone jack
    Marker stop time in spectrum mode 100msto 60s
    Squelch adjustablewith level line
    Trigger functions
    Trigger 

    Span≥10Hz
    Span=0Hz
    freerun,line,video,Rf level,external
    plus pretrigger,posttrigger,trigger delay
    with digitaldemodulation

     
    plusburst trigger and synchronization 
    to bit sequence(max.32 symbols)
    with analog demodulation plustrigger to demodulated AF
    Gated sweep,trigger source external,RFlevel
    Gate delay 1μsto 100s
    Gate legth 1μsto 100s,resolution min.1μs or
    1% of gate lenth
    Errorof gate length μ(1μs+(0.05%*gatelenth))
    Inputs and outputs(front panel)
    RF input Nfemale,50Ω
    FSIQ26 only adaptersystem,50Ω,N/3.5mm male and female
    VSWR(RFattenuation>0 dB) <1.5(f<3.5GHz)
    Attenuator 0dB to 70dB,switchablein 10dB steps
    Probe power supply +15/-12.6VDC,max.150mA
    Supply and coding connector
    for antennas,etc) ±10V,max.100mA,ground
    AF output Xout=10Ω,JK34jack
    Reference frequency
    Output,usable as input

    BNC female,10MHz,10dBm nom.
    Input 1Mhzto 16MHz,>0 dBm from 50Ω
    FSIQ3

    FSIQ3

    TAG:

     

    評分:0

    我來說兩句

    顯示全部

    :loveliness::handshake:victory::funk::time::kiss::call::hug::lol:'(:Q:L;P:$:P:o:@:D:(:)

    日歷

    « 2024-06-15  
          1
    2345678
    9101112131415
    16171819202122
    23242526272829
    30      

    數據統計

    • 訪問量: 0
    • 日志數: 2098
    • 建立時間: 2017-01-07
    • 更新時間: 2021-04-22

    RSS訂閱

  • <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • 床戏视频