SGS天然石材檢測及CE認證服務

上一篇 / 下一篇 2011-12-16 11:13:30

表觀密度及氣孔率、密度、吸水率、光澤度、抗折強度、耐磨性、防滑性、巖相分析、抗壓強度、斷裂模數、抗凍融試驗、銷釘破壞載荷、毛細吸水率、溫度沖擊、抗鹽晶、莫氏硬度、肖氏硬度、防滑性能、防火性能、放射性試驗、尺寸偏差、彎曲強度、熱循環、二氧化硫老化、碳酸鹽含量、非碳酸鹽碳含量、耐酸性、錨固強度、化學成分分析

Apparent density & Porosity, Gravity, Water absorption, Glossiness, Flexural strength, Abrasion resistance, Slip resistance, Petrographic description, Compressive strength, Modulus of rupture, Frost resistance, Breaking load at dowel hole, Water absorption coefficient capillarity, Thermal shock resistance, Salt crystallization resistance, Mohs’ hardness, Shore hardness, Slip resistance, Reaction to fire, Radionuclides, Dimension deviation, Bending Strength, Thermal cycling, Sulfur dioxide exposure, Carbonate content, Non-carbonate carbon content, Acid resistance, Anchoring strength, Chemical composition analysis

產品規范 Standard Specification for Product

n 歐洲市場European Market

根據89/106/EEC要求，以下用途的天然石材產品要求CE標識：

According to 89/106/EEC, below natural stone products needs CE marking,

產品標準號 Testing standards	適用產品 Applicable products
花崗巖和大理石類產品Granite & Marble
EN 1341	室外鋪路用天然石材大板Slabs of natural stone for external paving
EN 1342	室外鋪路用天然石材小方塊Setts of natural stone for external paving
EN 1343	室外鋪路用天然路沿石Kerbs of natural stone for external paving
EN 12057	天然石材-規格板Natural stone - Modular tiles
EN 12058	天然石材-鋪地及臺階用板Natural stone - Slabs for floors and stairs
EN 1469	天然石材-貼面板Natural stone - Slabs for cladding
EN 771-6	天然石砌塊Natural Stone Masonry Units
板巖產品Roofing Slate
EN 12326-1	不連續屋頂及覆層用板巖及石制品Slate and stone products for discontinuous roofing and cladding

n 美國市場American Market

產品標準號 Testing standards	適用產品 Applicable products
ASTM C615	花崗巖Granite Dimension Stone
ASTM C503	大理石Marble Dimension Stone
ASTM C1527	石灰華Travertine Dimension Stone
ASTM C1526	蛇紋石Serpentine Dimension Stone
ASTM C616	石英石 Quartz-Based Dimension Stone
ASTM C568	石灰巖Limestone Dimension Stone

n 中國市場Chinese Market

產品標準號

Testing standards

適用產品

Applicable products

GB/T 18601

天然花崗石建筑板材Natural granite building board

GB/T 19766

天然大理石建筑板材Natural marble building board

n 非洲及中東市場Africa & Middle East Market

石材出口至沙特一定要用ASTM標準，出口到肯尼亞、尼日利亞、阿爾及利亞等國家可視客戶具體情況選用EN標準或ASTM標準。具體測試項目參見以上內容。

When the stone exports to Saudi Arabia, it must apply to ASTM standard. When exports to Kenya, Nigeria, Algeria, you could select the EN standard or the ASTM standard which depends on the client. Detail test items please see the content above.

詳情請垂詢SGS工業服務

聯系人：郭小姐（市場部）

電話：+86(0)592 576 5859

傳真：+86(0)592 576 5380

E-mail: niky.guo@sgs.com