共找到 150 條與 金屬封閉母線 相關的標準，共 10 頁
本標準規定了金屬封閉母線的類型、技術參數、結構性能、試驗方法、設計制造和包裝運輸方式、安裝運行要求等。 本標準適用于電壓35kV及以下、電流40000A及以下、頻率50Hz(或60Hz)的金屬封閉母線。金屬封閉母線主要用于發電機出線及其他輸配電回路，以安全地傳輸電能。 本
Metal-enclosed bus
This standard covers assemblies of metal-enclosed (ME) conductors along with associated interconnections@ enclosures@ and supporting structures
Metal-Enclosed Bus
This standard covers assemblies of metal-enclosed (ME) conductors along with associated interconnections@ enclosures@ and supporting structures. When
Standard for Metal-Enclosed Bus
This standard covers assemblies of metal-enclosed conductors along with associated interconnections@ enclosures@ and supporting structures. When
Metal-Enclosed Bus and Calculating Losses in Isolated-Phase Bus
This standard covers assemblies of metal-enclosed (ME) conductors along with associated interconnections@ enclosures@ and supporting structures. When
Metal-Enclosed Bus and Calculating Losses in Isolated-Phase Bus
This standard covers assemblies of switch gear devices such as switches@ interrupting devices@ control@ instrumentation and metering@ protective
Switchgear assemblies including metal-enclosed bus
This standard covers assemblies of switch-gear devices such as switches@ interrupting devices@ control@ instrumentation and meter- ing@ protective
STANDARD FOR SWITCHGEAR ASSEMBLIES INCLUDING METAL-ENCLOSED BUS; CONSOLIDATED EDITION; SUPPLEMENTS C37.20A@ C37.20B AND C37.20C
1. Scope 1.1 This Standard applies to indoor and outdoor metal-enclosed busways for voltages from 751 V to 46 kV, inclusive, ac or dc, intended
Metal-Enclosed High Voltage Busways
本標準適用于在符合加拿大電氣法典第一部分規定的非危險場所使用的751V到46kV（包括這兩個電壓）的交流或直流室內和室外金屬封閉母線
Metal-Enclosed High Voltage Busways
Covers assemblies of metal-enclosed conductors along with associated interconnections, enclosures, and supporting structures
Metal-enclosed bus
本標準規定了封閉母線的品種、技術要求、結構、試驗方法、產品的成套范圍、包裝、運輸。 本標準適用于電壓為35kV及以下、電流為35000A及以下的發電機、變電站及其它輸配電回路上使用的封閉母線及其成套設備。 本標準不適用于使用在有嚴重腐蝕金屬構件、絕緣性和有劇烈震動、擺動、沖擊等場所的
Phase buses
本規范描述了用于34.5 kV及以下系統，適用于室內和室外應用的金屬封閉、自冷卻、非隔離相母線槽組件的設計、制造、檢驗和測試要求
Design and Fabrication of Metal-Enclosed Nonsegregated-Phase Bus Duct Assemblies
該技術規范是為了減少過程工業設施的成本而制定的，通過整合現有標準中的技術要求來形成統一的技術實踐
Metal-Enclosed Cable Bus Assemblies Electronic Entry Data Sheet
本標準涵蓋了金屬封閉(ME)導體的組件及其相關互連、外殼和支撐結構。所涵蓋的組件類型包括非隔離相母線、隔離相母線、隔離相母線和電纜母線。當包括開關和斷開連接時，它們應符合本標準。本標準涵蓋了額定最大工作電壓高達38 kV的室內和室外導體組件的性能特性。本標準不適用于UL 857 [B22]型母線槽和
IEEE Standard for Metal-Enclosed Bus
This Standard applies to free-standing poles of ferrous metal, aluminum, concrete, and wood, and to their accessories, for use in thesupport
Metal-Enclosed High Voltage Busways First Edition; General Instruction No 1-2
