• <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>


  • 共找到 150 條與 聯鎖防護裝置 相關的標準,共 10

    Agricultural machinery - Fixed guards and interlocked guards with guards locking for moving transmission parts (ISO/TS 28923:2012 modified)

    This European Standard specifies the safety requirements and their verification for the design and construction of fixed guards to be opened

    Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified)

    ADOPTED_FROM:EN 15811:2014 This European Standard specifies the safety requirements and their verification for the design and construction of fixed

    Agricultural machinery — Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified)

    本文件規定了帶防護鎖定的聯鎖裝置的技術要求和使用信息的要求。 本文件適用于帶機電式防護鎖定或電磁式防護鎖定的聯鎖裝置

    Safety of machinery—Safety requirements for interlocking devices—Part 2: Interlocking devices with guard-locking

    本標準規定了不受能源類型限制的帶防護裝置的聯鎖裝置(GB/T l5706.1—1995中給出下列各條的定義:3.23.1“聯鎖裝置”,3.22.4“聯鎖防護裝置”和3.22.5“帶防護鎖的聯鎖裝置”)的設計和選擇的原則。 本標準也對電氣聯鎖裝置提出了特別的要求(見第6章)。 本標準適用于

    Safety of machinery--Interlocking devices associated with guards---Principles for design and selection

    本標準規定了與防護裝置相關的聯鎖裝置的設計和選擇原則,不管其使用何種能源類型。 本標準適用于防護裝置中驅動聯鎖裝置的部件。 注:ISO14120 規定的防護裝置的設計和制造一般要求主要用于防止機械危險。 關于聯鎖裝置發出的,使機器停止并保持不動的信號的處理,見GB/T16855.1 或

    Safety of machinery—Interlocking devices associated with guards—Principles for design and selection

    本標準規定了主要用于保護人員免受機械性危險傷害的防護裝置的設計和制造的一般要求。 本標準主要適用于本標準發布后制造的機器。 要注意使用防護裝置以使非機械性危險減至最小。 本標準的要求適用于固定式和活動式防護裝置。本標準不適用于防護裝置中致動聯鎖裝置的那些部件。聯鎖裝置由GB/T

    Safety of machinery--Guards--General requirements for the design and construction of fixed and movable guards

    本文件規定了截留鑰匙聯鎖裝置及系統的要求和使用信息。 本文件適用于與安全相關的截留鑰匙聯鎖裝置及系統

    Safety of machinery—Safety requirements for interlocking devices—Part 3: Trapped key interlocking devices and systems

    本標準規定了壓力機工作危險區的各種安全防護裝置的功能、設計、制造和安裝技術要求。本標準適用于在制造、改造壓力機時選用的各種安全防護裝置

    Specification of safeguard for presses

    本標準規定了壓力機工作危險區的各種安全防護裝置的功能、設計、制造和安裝技術要求。 本標準適用于在制造、改造壓力機時選用的各種安裝防護裝置

    Specification of safeguard for presses

    本標準規定了不受能源類型限制的帶防護裝置的聯鎖裝置(GB/T 15706.1--2007中給出下列各條的定義:3.26.1“聯鎖裝置”,3.25.4“聯鎖防護裝置’’和3.25.5“帶防護鎖的聯鎖裝置”)的設計和選擇的原則。 本標準也對電氣聯鎖裝置提出了特別的要求(見第6章)。 本標準適用于

    Safety of machinery-Interlocking devices associated with guards-Principles for design and selection

    本文件規定了直接斷開位置開關的要求和使用信息。 本文件適用于標準負荷或微小負荷的直接斷開位置開關

    Safety of machinery—Safety requirements for interlocking devices—Part 1: Direct opening position switches

    本標準規定了與人體部位接近速度相關的安全防護裝置的定位。 本標準規定了基于人體部位接近速度數值的參數,并提供了從探測區或安全防護裝置的致動裝置到危險區的最小距離的確定方法。 本標準中的接近速度數值(步行速度和上肢運動)已通過計時測試或實際經驗驗證。本標準給出了典型接近時計算最小距離的指南。本標準

    Safety of machinery.Positioning of safeguards with respect to the approach speeds of parts of the human body

    本歐洲標準規定了自走式機器、安裝式、半安裝式或牽引式農業機械上的固定防護裝置(需用工具打開或移除)以及帶有或不帶鎖定的移動部件動力傳動互鎖防護裝置的安全要求及其驗證方法。此外,還規定了制造商提供的安全操作信息(包括剩余風險)。本標準處理以下重要危害(見附錄A)、危險情況和事件:固定防護裝置(需用工具

    Agricultural machinery. Fixed guards and interlocked guards with or without guard locking for moving transmission parts

    Agricultural equipment - Fixed guards and guards with locking or interlocking device for mobile power transmission elements (ISO/TS 28923:2012 modified)




    Copyright ?2007-2025 ANTPEDIA, All Rights Reserved
    京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號
    頁面更新時間: 2025-07-05 12:27

  • <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • 床戏视频