每分鐘表盤刻度 標準查詢與下載

DIN 41091-1:1976-02 電鐘用的刻度盤 分鐘報時刻度盤

Dials for electric clocks; minute-stroke dials

CSN 25 1811-1985 0,01 mm刻度值的鐘形刻度盤指示器． 基本尺寸

Zpracovatel a oborové normaliza?ní st?edisko: Továrny strojírenské techniky, k. p. Somet, Teplice — Vladimír Krej?i?ík Pracovník ??adu pro

Clock-type dial indicators with a alue of a scale division 0,01 mm.Fundamental dimensions

UNI 9015:1987 表盤式膨脹和雙金屬溫度計 單刻度表盤的刻度和標記

Stabilisce gli elementi (scale graduate e scritte) da riportare riportare su quadranti a scala singola e le modalita' con cui detti elementi

Dial-type expansion and bimetal thermometers. Scales and markings for single scale dials.

DLA MS28024 REV H VALID NOTICE 3-2008 轉彎測滑儀,4分鐘轉彎,2-3/4英寸刻度盤

Indicator, Turn and Slip, 4 Minute Turn, 2 3/4 Inch Dial

MIL MIL-G-23337-1962 壓力表、刻度盤指示表

GAGES, PRESSURE, DIAL INDICATING

AIR FORCE MS28024 REV H NOTICE 2-1996 2 3/4英寸刻度盤四分鐘轉彎側傾斜指示器

This notice should be filed in front of MS28024H dated O5 April 1988

INDICATORS, TURN AND SLIP, 4 MINUTE TURN, 2 3/4 INCH DIAL

AIR FORCE MS28024 REV H-1988 2 3/4英寸刻度盤四分鐘轉彎側傾斜指示器

PART WEER MS28024-1 INACTIVE FOR DESiGN AFTER 8 FEBRUARY 1956 FOR OEFINITION AND APPLICATION OF DRAWING STATUS NOTES SEE MIL-STD- 962

INDICATORS, TURN AND SLIP, 4 MINUTE TURN, 2 3/4 INCH DIAL

FORD WZ4-1995 乙炔壓力表刻度盤

PRESSURE GAGE DIAL ACETYLENE

UNI 8295:1981 壓力表和真空表 一級刻度盤的刻度和標記

Stabilisce gli elementi (scale graduate e scritte) da riportare su quadranti a scala singola e le modalita' con cu detti elementi devono essere

Pressure and vacuum gauges. Scales and markings for one scale dials.

CSN 25 1816-1985 精確到0.001mm的鐘形刻度盤指示器．基本尺寸

Zpracovatel a oborové normaliza?ní st?edisko: Továrny strojírenské techni-kyt k. p. Somet, Teplice — Vladimír Kre)?i?ík Pracovník ??adu pro

Clock-type dial indicators ith a value of a scale division 0,001 mm.Basic dimensions

HB 6-62-1975 航空儀表圓形刻度盤

本標準適用于航空儀表中具有圓形（或圓弧形）的向心式刻度盤和離心式刻度盤的設計

Aviation Instrument Circular Dial

STAS 6419-1970 電測儀表．標度盤和刻度儀

1.1. Prezentul standard se refer? Iu cadranele ?i sc?rile, gradate ale aparatelor de m?surat electrice indicatoare. l.'J

Elcclrical moasurinfi apparalus DIA1.S AND GRADUATlin SCALES

GSO ISO/IEC 17342:2009 IT 120mm（每面 4.7GB）、80mm（DVD-RAM 每面 1.46GB）、多刻錄光盤）

This International Standard specifies the mechanical, physical and optical characteristics of an 80 mm and a 120 mm DVD Re-recordable disk to enable

Information technology – 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW

UNI 5566:1965 飛機 儀表刻度盤和指針

I numeri e le graduazioni devono essere ridotti al numero minimo compatibile con la precisione di lettura richiesta. Caratteristiche e specificazioni.

Aircraft. Instrument dials and pointers.

DIN 41091-4:1974-02 電鐘用表盤 數字表盤

Dials for electric clocks; number dials