Q83 供熱器材設備 標準查詢與下載

GB/T 19913-2018 鑄鐵供暖散熱器

Cast iron heating radiator

GB/T 32835-2016 建筑采暖用鋼制散熱器配件通用技術條件

本標準規定了建筑采暖用鋼制散熱器配件的術語和定義、分類與標記、結構、要求、試驗方法、檢驗規則以及合格證、包裝和貯運。 本標準適用于符合GB/T 29039規定的鋼制采暖散熱器的片頭、鋼管、螺紋管口、絲堵、放氣絲堵主要配件。

General technical specification for steel heating radiator accessories

GB/T 31542-2015 鋼鋁復合散熱器

本標準規定了鋼鋁復合散熱器（以下簡稱散熱器）的術語和定義，規格與型號，材料與結構，要求，試驗方法，檢驗規則，標志、使用說明書和合格證，包裝、運輸和貯存等。 本標準適用于工業與民用建筑中，以不高于95 ℃且水質符合GB/T 29044-2012中4.5規定的熱水為熱媒的散熱器。

Steel-aluminum compound radiator

GB 29039-2012 鋼制采暖散熱器

本標準規定了鋼制采暖散熱器的分類與型號,要求,試驗方法,檢驗規則,標志、使用說明書和合格證,包裝、運輸和貯存、本標準適用于工業與民用建筑中,以不高于95 ℃的熱水或不高于0.3 MPa的飽和蒸汽為熱媒的鋼制采暖散熱器(以下簡稱散熱器)、

Steel heating radiator

GB/T 29039-2012 鋼制采暖散熱器

Steel heating radiator

GB/T 19913-2005 鑄鐵采暖散熱器

Cast iron heating radiator

GB 19913-2005 鑄鐵采暖散熱器

本標準規定了鑄鐵采暖散熱器的術語和定義、分類、主參數與型號、要求、試驗方法、檢驗規則、標志、運輸與貯存。 本標準適用于工業、民用建筑中，熱媒為130℃以下的熱水或0.2MPa以下蒸汽的鑄鐵采暖散熱器（以下簡稱散熱器）。

Cast iron heating radiator

QB/T 2590-2021 儲水式熱水器搪瓷制件

Storage water heater enamel parts

DB37/T 3595-2019 民用爐具熱工及環保試驗方法

Thermal and environmental test methods for civil stoves

DB37/T 3594-2019 民用爐具節能環保技術要求

Technical requirements for energy saving and environmental protection of civil stoves

JIS S 2112:2019 家用氣體循環加熱裝置

Gas hydronic heating appliances for domestic use

JG/T 143-2018 鋁制柱翼型散熱器

Aluminum column airfoil radiator

JG/T 2-2018 鋼制板型散熱器

本標準規定了鋼制板型散熱器(以下簡稱“散熱器”)的分類與標記、材料與結構、要求、試驗方法、檢驗規則、標志、使用說明書及合格證、包裝、運輸和貯存。 本標準適用于工業與民用建筑供暖系統，以溫度不高于95 ℃且水質符合GB/T 29044-2012中4.5規定的熱水為熱媒的散熱器。

Steel panel radiator

JIS S 2152:2017 帶液化石油氣筒的直接連接和軟管連接類型便攜式煤氣爐

Direct connecting and Flexible hose connecting type portable gas cookers with LPG cartridge

JIS S 2153:2017 帶液化石油氣筒的燃氣取暖器

Portable gas space heaters with LPG cartridge

BS EN 14543:2017 專用液化石油氣器具規范 - 遮陽傘露臺加熱器 - 室外或通風良好區域使用的無煙道輻射加熱器

Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use

DIN EN 13203-4:2017 家用燃氣器具生產熱水.第4部分:熱電聯供燃氣器具(mCHP)生產熱水和電力所需能耗的評定;德文版本EN 13203-4-2016

Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity; German version EN 13203-4:2016

JIS S 3024:2017 家用燃油熱水器

Oil burning water heaters for domestic use

EN 12976-1:2017 太陽供熱系統和部件-工廠制造系統-第1部分:一般要求

This European Standard specifies requirements on durability, reliability and safety for Factory Made solar heating systems. The standard also includes provisions for evaluation of conformity to these requirements. Concept of system families is included, as well. The requirements in this standard apply to Factory Made solar systems as products. The installation of these systems including their integration with roofs or facades is not considered, but requirements are given for the documentation for the installer and the user to be delivered with the system. External auxiliary water heating devices that are placed in series with the Factory Made system are not considered to be part of the system. Cold water piping from the cold water grid to the system as well as piping from the system to an external auxiliary heater or to draw-off points is not considered to be part of the system. Piping between components of the Factory Made system is considered to be part of the system. Any integrated heat exchanger or piping for space heating option is not considered to be part of the system.

Thermal solar systems and components - Factory made systems - Part 1: General requirements

EN 12976-2:2017 太陽供熱系統和部件-工廠制造系統-第1部分:試驗方法

This European Standard specifies test methods for validating the requirements for Factory Made Thermal Solar Heating Systems as specified in EN 12976-1. The standard also includes two test methods for thermal performance characterization by means of whole system testing.

Thermal solar systems and components - Factory made systems - Part 2: Test methods