K42 電力電容器 標準查詢與下載

DL/T 1219-2013 串聯電容器補償裝置 設計導則

本標準規定了串聯電容器補償裝置(簡稱串補裝置)的型式與電氣主接線、基本設計、設計原則及其條件,對串補裝置主設備及子系統的性能和試驗等提出基本要求。本標準適用于220kV~500kV電壓等級串補裝置的基本設計及主設備和子系統的基本要求。每個串補裝置工程均有其特殊性,應結合具體工程條件和要求使用本標準。

Design guide for series capacitor installation

DL/T 5289-2013 1000kV架空輸電線路鐵塔組立施工工藝導則

本標準規定了1000kV架空輸電線路工程鐵塔組立施工工藝標準。本標準適用于1000kV架空輸電線路工程的鐵塔組立施工。

Construction technology guide to the assembly and erection of the steel towers of 1000kV overhead transmission line

IEC 60143-2:2012 電力系統用串聯電容器.第2部分:串聯電容組用保護設備

Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks

NB/T 41003-2011 標稱電壓1000V及以下交流電力系統用自愈式并聯電容器產品質量分等

Product quality classification of self-healing shunt capacitors for AC power systems with nominal voltage 1000V and below

NB/T 41001-2011 電容式電壓互感器產品質量分等

Capacitive voltage transformer product quality classification

IEC 60358-1:2012 耦合電容器及電容分壓器. 第1部分: 通用條款

This part of IEC 60358 applies to: ? Capacitors, with rated voltage > 1 000 V, connected line to ground with the low voltage terminal either permanently earthed or connected to devices, for applications listed hereunder and other similar uses. This standard serves as basic standard for the coupling capacitor, the different parts of this standard will present the supplementary specifications and tests, for example IEC 60358-2, IEC 60358-3 or IEC 60358-4.

Coupling capacitors and capacitor dividers - Part 1: Common clauses

IEEE 18-2012 并聯電力電容器用電氣電子工程師學會(IEEE)標準

IEEE Standard for Shunt Power Capacitors

KS C 4621-2011 工業接地故障斷路器

? ??? ???? ??? ???? ????? ????, ????? ?? 380 V ??,

Residual current operated circuit-breaker with integral overcurrent protection for household uses(RCBO)

JB/T 7115-2011 低壓電動機就地無功補償裝置

本標準規定了低壓電動機就地無功補償裝置的術語和定義、使用條件、設計、結構及安全要求、質量要求和試驗、標志、運輸及安裝運行導則等。 本標準適用于頻率為50 Hz或60 Hz、標稱電壓為1 kV及以下的交流配電系統，與電動機并聯使用，用以補償電動機所產生的感性無功，提高功率因數的就地無功補償裝置（以下簡稱“裝置”）。

Local reactive power compensation installations for a low-voltage motor

JB/T 1811-2011 壓縮氣體標準電容器

本標準規定了壓縮氣體標準電容器的適用范圍、術語和定義、使用條件、質量要求和試驗、標志、包裝和運輸等。 本標準適用于內部以壓縮氣體為電介質的、主要用于50 Hz（或60 Hz）高壓測量電路中的標準電容器（以下簡稱電容器）。

Compressed gas standard capacitors

DIN EN 60252-1:2011 AC電動機電容.第1部分:總則.性能,測試和等級評定.安全要求.安裝和操作指南(IEC 60252-1-2010);德文版本EN 60252-1-2011

AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation (IEC 60252-1:2010); German version EN 60252-1:2011

DIN EN 60143-4:2011 電力系統用串聯電容器.第4部分:晶閘管控制串聯電容器(IEC 60143-4-2010);德文版本EN 60143-4-2010

Series capacitors for power systems - Part 4: Thyristor controlled series capacitors (IEC 60143-4:2010); German version EN 60143-4:2010

DIN EN 61881-1:2011 軌道交通.鐵道車輛設備.電力電子設備用電容器.第1部分:紙/塑料膜電容器(IEC 61881-1-2010);德文版本EN 61881-1-2011

Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors (IEC 61881-1:2010); German version EN 61881-1:2011

BS EN 60252-1:2011 交流電動機用電容器.總則.性能,試驗和額定值.安全性要求.安裝和操作指南

This part of IEC 60252 applies to motor capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having a frequency up to and including 100 Hz, and to capacitors to be connected to three-phase asynchronous motors so that these motors may be supplied from a single-phase system. This standard covers impregnated or unimpregnated capacitors having a dielectric of paper, plastic film, or a combination of both, either metallized or with metal-foil electrodes, with rated voltages up to and including 660 V. Motor start capacitors are covered by IEC 60252-2. NOTE The following are excluded from this standard: – shunt capacitors of the self-healing type for a.c. power systems of up to and including 1 000 V nominal voltage (see IEC 60831-1); – shunt capacitors of non-self-healing type for a.c. power systems of up to and including 1 000 V nominal voltage (see IEC 60931-1); – shunt capacitors for a.c. power systems having a nominal voltage above 1 000 V (see IEC 60871-1); – capacitors for induction heat-generating plants, operating at frequencies between 40 Hz and 24 000 Hz (see IEC 60110-1); – series capacitors (see IEC 60143); – coupling capacitors and capacitor dividers (see IEC 60358); – capacitors to be used in power electronic circuits (see IEC 61071); – small a.c. capacitors to be used for fluorescent and discharge lamps (see IEC 61048); – capacitors for suppression of radio interference (IEC publication under consideration); – capacitors intended to be used in various types of electrical equipment and thus considered as components; – capacitors intended for use with d.c. voltage superimposed on a.c. voltage. The object of this standard is a) to formulate uniform rules regarding performance, testing and rating; b) to formulate specific safety rules; c) to provide a guidance for installation and operation.

AC motor capacitors. General. Performance, testing and rating. Safety requirements. Guidance for installation and operation

BS EN 60252-2:2011 交流電動機電容器.電動機起動電容器

This part of IEC 60252 applies to motor start capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having the frequency of the mains. This standard covers impregnated or unimpregnated metallized motor start capacitors having a dielectric of paper or plastic film, or a combination of both and electrolytic motor start capacitors with non-solid electrolyte, with rated voltages up to and including 660 V.

AC motor capacitors. Motor start capacitors

DL/T 355-2010 濾波器及并聯電容器裝置檢修導則

本標準規定了換流站交直流濾波器及并聯電容器裝置檢修的基本要求、檢修周期、檢修項目、檢修內容及檢修過程等方面要求。 本標準適用于電力行業換流站交直流濾波器及并聯電容器裝置的檢修工作。

Guide for maintenance of filters and shunt capacitors

JIS C 4902-3 ERRATUM 1:2010 勘誤表

ERRATUM

IEC 60143-4:2010 電力系統用串聯電容器.第4部分:可控硅控制的的串聯電容器

This part of IEC 60143 specifies testing of thyristor controlled series capacitor (TCSC) installations used in series with transmission lines. This standard also addresses issues that consider ratings for TCSC thyristor valve assemblies, capacitors, and reactors as well as TCSC control characteristics, protective features, cooling system and system operation.

Series capacitors for power systems - Part 4: Thyristor controlled series capacitors

IEC 60252-1:2010 交流電動機電容器.第1部分:總則.性能,試驗和評定.安全性要求.安裝和運轉指南

This part of IEC 60252 applies to motor capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having a frequency up to and including 100 Hz, and to capacitors to be connected to three-phase asynchronous motors so that these motors may be supplied from a single-phase system. This standard covers impregnated or unimpregnated capacitors having a dielectric of paper, plastic film, or a combination of both, either metallized or with metal-foil electrodes, with rated voltages up to and including 660 V. Motor start capacitors are covered by IEC 60252-2. The object of this standard is a) to formulate uniform rules regarding performance, testing and rating; b) to formulate specific safety rules; c) to provide a guidance for installation and operation.

AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation

DL/T 365-2010 串聯電容器補償裝置控制保護系統現場檢驗規程

本標準規定了串聯電容器補償裝置(簡稱串補裝置)控制保護系統現場檢驗的項目、要求和方法。本標準適用于220kV-500kV電壓等級輸電線路串補裝置控制保護系統的現場檢驗,其他電壓等級串補裝置控制保護系統的現場檢驗可參照執行。

Field testing code on control and protection system of series capacitor installation