• <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • 參考塊

    與測量試樣具有相同形狀尺寸的低阻尼材料塊,用于測量衰減系數的標準件。需具備高度均勻性和穩定性以滿足校準要求。


    參考塊有關的標準

    標準號 & 類別標準名稱發布
    AS 1815.3:2007(R2017)
    試驗標準

    給水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-鋁-聚乙烯和交聯聚乙烯-鋁-交聯聚乙烯復合壓力管

    Metallic materials-Rockwell hardness test Method 3:Calibration of reference blocks (scales A,B,C,D,E,F,G,H,K,N,T)


    洛氏硬度測試機 

    2017
    澳大利亞標準協會
    AS 1815.3:2024
    試驗標準

    金屬材料 洛氏硬度試驗 第3部分:參考塊的校準(ISO 6508-3:2023,IDT)

    Metallic materials - Rockwell hardness test, Part 3: Calibration of reference blocks (ISO 6508-3:2023, IDT)


    壓頭 

    2024-09-27
    澳大利亞標準協會
    AS 1817.2:2002(R2017)
    試驗標準

    金屬材料 維氏硬度試驗 試驗機的驗證和校準

    Metallic materials - Vickers hardness test - Verification of testing machines


    壓頭 

    2017
    澳大利亞標準協會
    AS 1817.3:2002(R2017)
    試驗標準

    金屬材料 維氏硬度試驗 標準塊的校準

    Metallic materials - Vickers hardness test - Calibration of reference blocks

    2017
    澳大利亞標準協會
    AS ISO 3452.3:2020
    試驗標準

    無損檢測 滲透檢測 第 3 部分:參考試塊

    Non-destructive testing — Penetrant testing, Part 3: Reference test blocks

    2020-03-06
    澳大利亞標準協會
    AS ISO 3452.5:2020
    試驗標準

    無損檢測 滲透檢測 第 5 部分:溫度高于 50 °C 的滲透檢測

    Non-destructive testing — Penetrant testing, Part 5: Penetrant testing at temperatures higher than 50 °C


    滲透檢測 高溫測試 

    2020-03-06
    澳大利亞標準協會
    AS ISO 9934.2:2020
    試驗標準

    無損檢測 磁粉檢測 第 2 部分:檢測介質

    Non-destructive testing — Magnetic particle testing, Part 2: Detection media


    性能檢驗 

    2020-03-06
    澳大利亞標準協會
    ASTM E1158-14
    Guide

    金屬和金屬合金生產材料的脈沖縱向波超聲檢驗用標準試塊的材料選擇和制備的標準指南

    Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material


    超聲波檢查 

    2014
    美國材料與試驗協會
    ASTM E127-20
    試驗標準

    鋁合金超聲標準試塊的制造和檢驗的標準實施規程

    Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks


    超聲波檢查 

    2020
    美國材料與試驗協會
    ASTM E804-88
    試驗規范

    超聲波測試系統校準的實踐方法

    A Practical Approach to Ultrasonic Test System Calibration

    1988
    美國材料與試驗協會
    BS EN ISO 14577-3:2015
    試驗標準

    金屬材料.測量金屬硬度和參數用的儀表壓痕試驗.參照試塊的校準

    Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks

    2015-07-31
    英國標準學會
    BS EN ISO 16811:2014
    試驗標準

    無損檢測. 超聲波檢測. 靈敏度和范圍設置

    Non-destructive testing. Ultrasonic testing. Sensitivity and range setting


    超聲波探傷儀 

    2014-03-31
    英國標準學會
    BS EN ISO 6506-3:2014
    規范

    金屬材料.布氏硬度試驗.基準塊校準

    Metallic materials. Brinell hardness test. Calibration of reference blocks


    布氏硬度測試 校準設備 

    2014-09-30
    英國標準學會
    BS EN ISO 6508-3:2023
    規范

    金屬材料 洛氏硬度測試 參考塊的校準

    Metallic materials. Rockwell hardness test - Calibration of reference blocks


    壓頭 

    2024-01-31
    英國標準學會
    DANSK DS/ISO 6508-3:2024

    金屬材料 洛氏硬度試驗 第3部分:參考塊的校準

    Metallic materials – Rockwell hardness test – Part 3: Calibration of reference blocks


    壓頭 洛氏硬度測試機 

    2024-01-09
    丹麥標準化協會
    DIN EN ISO 3452-3:2014
    試驗標準

    無損試驗. 滲透檢測. 第3部分: 參考檢測試塊(ISO 3452-3-2013); 德文版本EN ISO 3452-3-2013

    Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013); German version EN ISO 3452-3:2013

    2014-03
    德國標準化學會
    DIN EN ISO 3452-3:2014-03
    試驗標準

    無損檢測-滲透檢測-第3部分:參考試塊

    Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013); German version EN ISO 3452-3:2013

    2014-03
    德國標準化學會
    DIN EN ISO 6506-2 E:2016-04
    試驗標準

    金屬材料 布氏硬度試驗 第2部分:試驗機的檢驗和校準(草案)

    Brinell hardness testing of metallic materials Part 2: Inspection and calibration of testing machines (draft)


    布氏硬度 硬度測試機 

    2016-04
    德國標準化學會
    DIN EN ISO 6508-3:2024

    金屬材料 洛氏硬度試驗 第3部分:參考塊的校準(ISO 6508-3:2023)

    Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023)


    壓頭 洛氏硬度測試機 

    2024-04-01
    德國標準化學會
    DIN EN ISO 6508-3:2024-04

    金屬材料洛氏硬度測試 第3部分:參考塊的校準(ISO 6508-3:2023)

    Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023); German version EN ISO 6508-3:2023


    壓頭 洛氏硬度測試機 

    2024-04
    德國標準化學會
    ISO 4545-3:2017
    試驗

    金屬材料.努氏硬度試驗.第3部分:參考塊的校正

    Metallic materials - Knoop hardness test- Part 3:Calibration of reference blocks

    2017-12-14
    國際標準化組織
    ISO 6506-3:2014
    規范

    金屬材料 - 布氏硬度試驗 - 第3部分:參考塊的校準

    Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks

    2014-09-25
    國際標準化組織
    ISO 6508-3:2023
    規范/規程

    金屬材料洛氏硬度試驗第3部分:參考塊的校準

    Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks


    洛氏硬度計 

    2023-12-13
    國際標準化組織
    JIS B 7730:2017
    規范

    洛氏硬度試驗.基準塊的校準

    Rockwell hardness test -- Calibration of reference blocks

    2017-08-21
    日本工業標準調查會
    JIS Z 2343-5:2012
    試驗標準

    無損檢測.滲透試驗.第5部分:溫度高于50℃條件下的滲透試驗

    Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degree C


    滲透檢測 高溫測試 

    2012-01-20
    日本工業標準調查會
    JIS Z 2354:2012
    試驗標準

    測量固體超聲波衰減系數的檢測方法

    Method for measurement of ultrasonic attenuation coefficient of solids

    2012-01-20
    日本工業標準調查會
    NF A03-153-3*NF EN ISO 6508-3:2023

    金屬材料 洛氏硬度試驗 第3部分:參考塊的校準

    Metallic materials - Rockwell hardness test - Part 3 : calibration of reference blocks


    壓頭 

    2023-12-20
    法國標準化協會
    NF EN ISO 6508-3:2023

    金屬材料 洛氏硬度試驗 第3部分:參考塊的校準

    Metallic materials - Rockwell hardness test - Part 3 : calibration of reference blocks


    壓頭 

    2023-12-01
    法國標準化協會
    SS-EN ISO 14577-3:2015
    試驗標準

    金屬材料 帶測量儀器的壓入試驗硬度和材料參數 第3部分:參考塊的校準(ISO 14577-3:2015)

    Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)


    壓頭 測試機 

    2015
    瑞典標準研究所
    SS-EN ISO 4545-3:2018
    試驗標準

    金屬材料 科諾普硬度試驗 第3部分:參考塊的校準(ISO 4545-3:2017)

    Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017)


    壓痕 

    2018
    瑞典標準研究所
    SS-EN ISO 6506-3:2014
    規程標準

    金屬材料 布氏硬度試驗 第3部分:標準塊的校準(ISO 6506-3:2014)

    Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014)

    2014
    瑞典標準研究所
    SS-EN ISO 6507-3:2018
    試驗

    金屬材料 維氏硬度試驗 第3部分:參考塊的校準(ISO 6507-3:2018)

    Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018)

    2018
    瑞典標準研究所
    SS-EN ISO 6508-3:2015
    規范標準

    金屬材料 洛氏硬度試驗 第3部分:標準塊的校準(ISO 6508-3:2015)

    Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)

    2015
    瑞典標準研究所
    SS-EN ISO 6508-3:2024
    試驗標準

    金屬材料 洛氏硬度試驗 第3部分:標準塊的校準(ISO 6508-3:2023)

    Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023)


    壓頭 洛氏硬度測試機 

    2024
    瑞典標準研究所
    UNE-EN ISO 14577-3:2016
    試驗標準

    金屬材料 硬度和材料參數的儀器化壓痕測試 第3部分:參考塊的校準

    Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)

    2016-01-13
    西班牙標準化協會
    UNE-EN ISO 16810:2014
    規范標準

    無損檢測 超聲波檢測 一般原則(ISO 16810:2012)

    Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)


    工業產品 

    2014-07-02
    西班牙標準化協會
    UNE-EN ISO 16811:2014
    試驗標準

    無損檢測 超聲波檢測 靈敏度和范圍設置(ISO 16811:2012)

    Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012)


    超聲波探傷儀 

    2014-07-02
    西班牙標準化協會
    UNE-EN ISO 3452-3:2014
    試驗標準

    無損檢測 滲透檢測 第3部分:參考試塊(ISO 3452-3:2013)

    Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013)

    2014-03-26
    西班牙標準化協會
    UNE-EN ISO 6506-3:2015
    試驗標準

    金屬材料-布氏硬度試驗-第3部分:標準塊的校準(ISO 6506-3:2014)

    Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014)

    2015-01-28
    西班牙標準化協會
    UNE-EN ISO 6507-3:2018
    試驗標準

    金屬材料 維氏硬度測試 第3部分:參考塊的校準

    Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018)


    壓痕 

    2018-10-17
    西班牙標準化協會
    UNE-EN ISO 6508-3:2024

    金屬材料 洛氏硬度試驗 第3部分:標準塊的校準(ISO 6508-3:2023)

    Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023)


    壓頭 洛氏硬度測試機 

    2024-07-10
    西班牙標準化協會
    UNI EN ISO 6508-3:2024

    金屬材料 洛氏硬度試驗 第3部分:參考塊的校準

    Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks


    壓頭 洛氏硬度測試機 

    2024-02-22
    意大利統一標準化組織

     




    Copyright ?2007-2025 ANTPEDIA, All Rights Reserved
    京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號
    頁面更新時間: 2025-08-26 01:37

  • <li id="ccaac"></li>
  • <table id="ccaac"><rt id="ccaac"></rt></table>
  • <td id="ccaac"></td>
  • <td id="ccaac"></td>
  • 床戏视频