轉子

用于人工舉升的螺旋腔泵系統

Progressing Cavity Pump Systems for Artificial Lift—Pumps

冷水表 單流式

Cold-Water Meters— Singlejet Type

單射流型冷水表

Cold-Water Meters—Singlejet Type

螺桿式化學計量泵

Progressive Cavity Chemical Metering Pumps

螺桿式化學計量泵

Progressive Cavity Chemical Metering Pumps

電能表物理方面—安全標準

Physical Aspects of Watthour Meters—Safety Standard

用于石油 化工 和天然氣工業服務的離心風機（第三版）

Centrifugal Fans for Petroleum@ Chemical@ and Gas Industry Services (THIRD EDITION)

恒速同心圓筒旋轉粘度計校準或校準驗證的標準試驗方法

Standard Test Method for Calibration or Calibration Verification of Constant Speed Concentric Cylinder Rotational Viscometers

牙科 環鉆車針

Dentistry. Trephine burs

油漆和清漆 用旋轉粘度計測定粘度 用圓盤或球軸以規定速度測量相對粘度

Paints and varnishes. Determination of viscosity using rotational viscometers - Relative measurement of viscosity using disc or ball spindles at specified speeds

建筑施工機械和設備. 混凝土表面浮動處理和精加工機械. 術語和商業規格

Building construction machinery and equipment. Machinery for concrete surface floating and finishing. Terms and commercial specifications

建筑施工機械及設備 混凝土表面抹平和精加工機械 商業規格

Building construction machinery and equipment. Machinery for concrete surface floating and finishing. Commercial specifications

機械振動 轉子平衡 具有靈活行為的轉子的程序和公差

Mechanical vibration. Rotor balancing. Procedures and tolerances for rotors with flexible behaviour

機械振動 轉子平衡 評估平衡誤差的程序

Mechanical vibration. Rotor balancing - Procedures for assessing balance errors

機械振動 轉子平衡 介紹

Mechanical vibration. Rotor balancing. Introduction

機械振動 轉子平衡 詞匯

Mechanical vibration. Rotor balancing. Vocabulary

真空技術 真空計 旋轉轉子計的規格、校準和測量不確定度

Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges

油漆和清漆 使用旋轉粘度計測定粘度 第2部分：使用盤式或球式主軸在規定速度下進行相對粘度測量

Paints and varnishes – Determination of viscosity using rotational viscometers – Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds

涂料和清漆 使用旋轉粘度計測定粘度 第2部分：使用盤式或球式主軸在規定速度下進行粘度的相對測量（ISO 2884-2:2024）

Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024)

色漆和清漆 使用旋轉粘度計測定粘度 第2部分：使用圓盤或球軸在規定轉速下進行相對粘度測量（ISO 2884-2:2024）

Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024)

機械振動 轉子平衡 第1部分：簡介

Mechanical vibration - Rotor balancing - Part 1: Introduction

機械振動 轉子平衡 第 14 部分：平衡誤差評估程序 (ISO 21940-14:2012 + Amd 1:2022)

Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012 + Amd 1:2022)

機械振動 - 轉子平衡 - 第 14 部分：平衡誤差評估程序 (ISO 21940-14:2012 + Amd 1:2022)

Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012 + Amd 1:2022)

機械振動 轉子平衡 第2部分：詞匯

Mechanical vibration - Rotor balancing - Part 2: Vocabulary

HS系列環錘式破碎機

HS Series Hammer Crusher

立式水輪發電機檢修技術規程

Technical code for maintenance of vertical hydro-generators

機械振動 在旋轉軸上測量評價機器的振動 第4部分:具有滑動軸承的燃氣輪機組

Mechanical vibration Measurement and evaluation of vibration of machines on rotating shafts Part 4: Gas turbine units with plain bearings

未硫化橡膠 用圓盤剪切黏度計進行測定 第3部分：無填料的充油乳液聚合型苯乙烯-丁二烯橡膠Delta門尼值的測定

Rubber, unvulcanized—Determinations using a shearing-disc viscometer—Part 3:Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR

橡膠塑料加壓式捏煉機

Pressurized kneader for rubber and plastics

石油天然氣工業井下設備.人工舉升用螺桿泵系統.第1部分:泵

Downhole equipment for petroleum and natural gas industries.Progressing cavity pump systems for artificial lift.Part 1:Pumps

石油、石化及天然氣工業流程用容積式回轉壓縮機

Petroleum,Petrochemical and natural gas industries.Process positive-displacement rotary-type compressors

橡膠塑料粉碎機械 第1部分：刀片式破碎機安全要求

Rubber and plastics crushing machinery Part 1: Safety requirements for blade crushers

橡膠塑料粉碎機械 第3 部分：切碎機安全要求

Rubber and plastics crushing machinery Part 3: Safety requirements for shredders

石油、石化和天然氣工業 特種用途汽輪機

Petroleum,petrochemecal and natural gas industries steam turbines.Special-purpose applications

工業尾氣能量回收透平膨脹機

Industrial off-gas energy recovery turbine expander

箔片軸承 氣體動壓徑向軸承性能 靜態承載能力、摩擦因數和壽命測試

Foil bearings—Performance of hydrodynamic gas journal bearings—Testing of static load capacity, friction coefficient and lifetime

螺桿泵名詞術語

Screw pump terminology

機械振動 轉子平衡 第12部分：具有撓性特性的轉子的平衡方法與允差

Mechanical vibration—Rotor balancing—Part 12: Procedures and tolerances for rotors with flexible behaviour

機械振動 轉子平衡 第13部分：大中型轉子現場平衡的準則和安全防護

Mechanical Vibration Rotor Balancing Part 13: Criteria and Safety Precautions for Field Balancing of Large and Medium-sized Rotors

機械振動 轉子平衡 第14部分：平衡誤差的評估規程

Mechanical vibration—Rotor balancing—Part14: Procedures for assessing balance errors

機械振動 轉子平衡 第23部分:平衡機測量工位的防護罩和其他保護措施

Mechanical vibration—Rotor balancing—Part23：Enclosures and other protective measures for the measuring station of balancing machines

密閉式煉膠機煉塑機

Rubber internal mixers & plastics internal mixers

渦輪式水果打漿機

Cold turboextractor for fruit

同步發電機倒帶 IEEE 指南，50 Hz 和 60 Hz，額定 1 MVA 及以上

IEEE Guide for the Rewind of Synchronous Generators, 50 Hz and 60 Hz, Rated 1 MVA and Above

IEEE同步發電機復勵導則 適用于50赫茲和60赫茲頻率、額定容量1兆伏安及以上的設備

IEEE Guide for Rewind of Synchronous Generators, 50 Hz and 60 Hz, Rated 1 MVA and Above

機械振動. 轉子平衡. 第11部分: 剛性轉子的程序和公差

Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour

機械振動 - 轉子平衡第1部分:簡介

Mechanical vibration — Rotor balancing — Part 1: Introduction

機械振動.轉子平衡.第21部分:平衡機的描述和評估

Mechanical vibration — Rotor balancing — Part 21: Description and evaluation of balancing machines

機械振動.轉子平衡.第23部分:平衡機測量站用附件和其他保護措施

Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines

機械振動.轉子平衡.第2部分:詞匯

Mechanical vibration - Rotor balancing - Part 2: Vocabulary

真空技術.真空計.旋轉轉子計的規范、校準和測量不確定度

Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges

塑料.液態或象乳膠或分散體一樣的樹脂.用單筒式旋轉粘度計法測定表觀粘度

Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method

硬巖反擊式破碎機

Hard Rock Impact Crusher

立式復合破碎機

Vertical Compound Crusher

汽輪機、汽輪發電機轉子和主軸鍛件超聲檢測方法

Ultrasonic testing method for rotor and shaft forgings of steam turbine and turbine generator

石油、化學和氣體工業用整體齒輪增速組裝型離心式空氣壓縮機

Integral gear speed-increasing assembled centrifugal air compressor for petroleum, chemical and gas industries

單螺桿泵

single screw pump

渦輪增壓器 第3部分:轉子平衡品質及校驗方法

Turbochargers.Part 3: Balance quality requirements and check methods of rotors

壓水堆核電廠汽輪機轉子設計制造規范 第3部分：焊接轉子

Design and manufactering specification of steam turbine rotors for pressurized water reactor nuclear power plant.Part 3: Welded rotor

色漆和清漆 用旋轉粘度計測定粘度 第2部分：用圓盤或球軸在規定轉速下進行粘度的相對測量

Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2 : relative measurement of viscosity using disc or ball spindles at specified speeds

色漆和清漆 用旋轉粘度計測定粘度 第2部分：用圓盤或球軸在規定轉速下進行粘度的相對測量

Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2 : relative measurement of viscosity using disc or ball spindles at specified speeds

高功率垂直潛入式電動離心泵設計和制造規范

Specification for High Power Vertical Submerged Motor Centrifugal Pumps for Water Service

硬軸承平衡機技術 正確使用轉子類型特定校準

Hard Bearing Balancing Machine Technology - Proper Use of Rotor Type-Specific Calibration

平衡機 描述和選擇 臥式、雙平面、硬軸承型燃氣輪機轉子平衡機

Balancing Machines - Description and Selection Horizontal, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors

ABS勵磁環定位標準化

ABS Exciter Ring Location Standardization

涂料和清漆 使用旋轉粘度計測定粘度的方法 第2部分：規定轉速下用盤形或球形槳測量相對粘度（ISO 2884-2:2024 等同）

Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024, IDT)

建筑施工機械和設備 混凝土表面浮漿和修整機械 第1部分：術語和商業規范（ISO 13105-1:2014 等同）

Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 1: Terms and commercial specifications (ISO 13105-1:2014, IDT)

機械振動 轉子平衡 第11部分：剛性行為轉子的程序和公差（ISO 21940-11:2016 等同采用）

Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour (ISO 21940-11:2016, IDT)

機械振動 轉子平衡 第12部分：柔性行為轉子的程序和公差（ISO 21940-12:2016 等同采用）

Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016, IDT)

機械振動 轉子平衡 第14部分：剛性及柔性轉子的平衡質量要求 不平衡誤差（ISO 21940-14:2012 等同采用）

Mechanical vibration - Rotor balancing - Part 14: Balance quality requirements of rigid rand flexible rotors - Balance errors (ISO 21940-14:2012, IDT)

螺桿鉆具轉子鍍鉻技術規范

Chrome-plating Technical Specification for Rotor of Downhole Motor

潛水電機定、轉子檢驗及驗收技術規范

Technical specification for inspection and acceptance of submersible motor stator and rotor

轉子自動生產線

Rotor automatic production line

QFS型660MW等級雙水內冷汽輪發電機

QFS Type 660MW Class Dual Inner Water-Cooled Generators

玻璃轉子流量計

Variable area meters

磁電機

Magnetoes

離心機 通用安全要求

Centrifuges - Common safety requirements

石油和天然氣工業 用于人工舉升的螺桿泵系統 第1部分：泵

Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) (Endorsed by AENOR in January of 2010.)

塑料 液態樹脂或乳液或分散體 使用單筒型旋轉粘度計方法測定表觀粘度

Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)

油漆和清漆 使用旋轉粘度計測定粘度 第2部分：使用圓盤或球軸在規定速度下進行相對粘度測量

Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds