聚烯烴

自動打包機用農用打包線

Agricultural Baling Twine for Automatic Balers

塑料管和管件用試驗方法 試驗28：聚烯烴管、管件和部件中顏料或炭黑分散體程度的評估方法

Method of test for plastics pipes and fittings - Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

擠壓預制撓性多孔聚烯烴板狀和管狀隔熱材料的標準規格

Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

預制撓性多孔聚烯烴板狀和管狀隔熱材料規范

Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

采用差示掃描量熱法的聚烯烴氧化誘導時間的標準試驗方法

Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

通過紅外分光光度法（FT-IR）測定聚烯烴和聚烯烴共聚物結構特征的標準實踐

Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

通過波長色散X射線熒光光譜法測定聚烯烴的元素含量的標準測試方法

Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

通過高溫凝膠滲透色譜法測定聚烯烴的分子量分布和分子量平均值的標準測試方法

Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

通過高溫凝膠滲透色譜法測定聚烯烴的分子量分布和分子量平均值的標準測試方法

Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

用TD-NMR弛豫測定法測量聚烯烴性能的標準指南

Standard Guide for Measurement of Polyolefin Properties Using TD-NMR Relaxometry

用差示掃描量熱法測定碳氫化合物氧化誘導時間的標準試驗方法

Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry

評價聚合物多孔和無孔材料中或其上抗菌劑抗鏈霉菌（粉色染色生物）染色性能的標準試驗方法

Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Porous and Nonporous Materials Against Staining by Streptomyces species (A Pink Stain

聚烯烴管和配件電熔連接的標準實施規程

Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings

熱縮電纜入口密封件的標準規范（米制）

Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

高密度聚乙烯（PE）管線管的標準規范

Standard Specification for High-Density Polyethylene (PE) Line Pipe

聚烯烴復合地板磚的標準規范

Standard Specification for Polyolefin Composition Floor Tile

聚氯乙烯（PVC） 聚烯烴和其他聚合物涂層鋼鏈條圍欄織物的標準規范

Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric

D3900-橡膠測試方法——通過紅外光譜法測定乙烯-丙烯共聚物（EPM）和乙烯-丙烯-二烯三元共聚物（EPDM）中的乙烯單元

D3900-Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

D6247-波長色散X射線熒光光譜法測定聚烯烴元素含量的試驗方法

D6247-Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

航空航天系列. 連接, 絕緣和標識用熱收縮套管. 聚烯烴套管. 工作溫度介于-55 ℃和135 ℃之間. 產品標準

Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification. Polyolefin sleeving. Operating temperatures -55 C to 135 C. Product standard

柔性絕緣套管 各類套管的規格說明 第281頁：熱縮型聚烯烴套管 半導電型

Flexible insulating sleeving - Specifications for individual types of sleeving. Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive

塑料 聚烯烴在露天陸地環境中的生物降解 規格

Plastics. Biodegradation of polyolefins in an open-air terrestrial environment. Specification

貿易產品運輸鏈 熱塑性樹脂制成的特殊托盤 第2部分：要求和試驗

Transportation chain for trade products - Specific pallet made from thermoplastic resin - Part 2: Requirements and testing

航空航天系列 熱收縮套管 用于捆綁、絕緣和識別 第101部分：聚烯烴套管 工作溫度 -55°C 至 135°C 產品標準（草案）

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 101: Polyolefin sleeving - Operating temperatures -55 °C to 135 °C

航空航天系列 熱收縮套管 用于捆綁、絕緣和識別 第201部分：聚烯烴識別套管 工作溫度范圍 -55°C 至 135°C 產品標準

Aerospace series - Sleeves, heat-shrinkable, for binding, insulation and identification - Part 201: Polyolefin identification sleeves - Operating Temperature range -55 °C to 135 °C - Product standard; German and English version EN 4708-201:2022

航空航天系列 熱收縮套管 用于粘合、絕緣和識別 第301部分：粘合劑內襯聚烯烴套管 工作溫度 55°C 至 105°C 產品標準（草案）

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 301: Adhesive lined polyolefin sleevings - Operating temperature - 55 °C to 105 °C - Product Standard

航空航天系列 熱收縮成型件 第101部分：聚烯烴 半剛性 有限火災危險 溫度范圍 30°C 至 105°C 產品標準（草案）

Aerospace series - Heat shrinkable moulded shapes - Part 101: Polyolefin, semi-rigid, limited fire hazard - Temperature range - 30 °C to 105 °C

電纜和光纜絕緣和護套材料通用試驗方法.第42部分:聚乙烯和聚丙烯混合料專用試驗方法.高溫處理后抗張強度和斷裂伸長率試驗.高溫處理后卷繞試驗.空氣熱老化后的卷繞試驗.測定質量的增加.長期熱穩定性試驗.銅催化氧化降解試驗方法

Common test methods for insulating and sheathing materials of electric and optical cables.Part 42:Methods specific to polyethylene and polypropylene compounds.Tensile strength and elongation at break after conditioning at elevated temperature.Wrapping tes

鋰離子電池用聚烯烴隔膜

Polyolefin separator for lithium-ion battery

柔性絕緣套管 第3部分：各類套管的規范 第282頁：熱縮聚烯烴套管 應力控制

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control

電纜和光纜.非金屬材料的試驗方法.第410部分:雜項試驗.聚烯烴絕緣導體銅催化氧化降解的試驗方法

Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

熱縮模具形狀.第3部分:形狀尺寸、材料要求和兼容性性能的要求規范.活頁101:聚烯烴半剛性的熱縮模具形狀的有限火患、材料要求和系統性能

Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements a

塑料.用尺寸排除色譜法測定聚合物的平均分子量和分子量分布.第4部分:高溫法

Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method

冷熱水裝置用塑料管道系統.耐高溫聚乙烯（PE-RT）.第2部分:管道.修改件1

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes — Amendment 1

航空航天系列 套管 熱收縮型 用于綁定、絕緣和標識 第301部分：黏合內層聚烯烴套管 工作溫度 55 °C至105 °C 產品標準

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 301: Adhesive lined polyolefin sleevings - Operating temperature - 55 °C to 105 °C - Product Standard

柔性絕緣套管 第3部分：各種類型套管的規范 表 284：用于油屏障應用的熱收縮套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable, sleevings, for oil barrier applications (Endorsed by AENOR in February of 2015.)

柔性絕緣套管 第3部分：各類套管的規格 第 247 頁：熱縮 聚烯烴套管 雙壁 不阻燃 厚壁和中壁（IEC 15/858/CDV:2018）

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable@ polyolefin sleeving@ dual wall@ not flame retarded@ thick and medium wall (IEC 15/858/CDV:2018); German and English version prEN IEC 60684

通信電纜用聚烯烴絕緣料

Polyolefin insulation materials for communication cables